Achieve the best possible wind protection for Lavalier microphones worn on talent outdoors with the Eastwind Audio Lavalier Foam and Fur Shields. The lavalier foam windscreen combines with an outer fur windshield to create a small, dead-air cavity within the windshield, providing a secure fit and professional-quality wind protection. In addition to reducing wind noise, Lavalier Foam and Fur Shield considerably minimizes the rustling noise from movement and clothing.

This package includes two black foam windscreens and two black fur windshields.

Wind Protection for Lavalier Mics    Lavalier Foam Windscreen    Outer Fur Windshield

Related Questions and Answers

Q: 1. Will the power requirement for this mic be met with a Zoom H5 recorder? What would the setting be? I'm seeing a voltage requirement of 2-5V but the Zoom has settings of 12,24, and 48V for the XLR adapter.

A: You can use the Rode VXLR+ adapter [BH #ROVXLRP] between the Rode Go II and the XLR mic input on the Zoom H5 and it will convert the phantom power on the H5 to the mic plugin power that is needed for the Rode Go II to operate and 12V setting should be fine for that.

Q: 2. will this mic work connected to my fx3 audio handle?

A: You would need to use a battery powered mic like the Rode VideoMic NTG if you want to go directly into the 1/8'' mic input on the Sony FX3. The Sony FX3 does not have mic plugin power. To be able to use the Rode Videomic Go, you would need the compatible FX3 XLR module along with the Rode VXLR+ adapter.

Q: 3. is this compatible with canon xa11?

A: The Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone is not directly compatible with the 3.5mm TRS input connection on the Canon XA11 Compact Full HD Camcorder, as this connection does not supply the plug-in power required for operation of the VideoMic GO II. These two items can be made to work together via the XLR inputs on the XA11 if the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (BH #ROVXLRP) is implemented, which will convert phantom power from the XLR input down to the plug-in power appropriate for the VideoMic GO II's operation.

Q: 4. I want to use this with a Komodo-X. Can the mic be powered using a female 3.5mm TRS to RED 5-pin lemo adapter cable?

A: You can use the RED DIGITAL CINEMA DSMC3 RED 5-Pin LEMO to 3.5mm Female Audio Adapter (11.3") (BH #RE7900704) with the RODE VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone, to be able to connect it to a RED DIGITAL CINEMA KOMODO-X 6K Digital Cinema Camera.

Q: 5. Olympus E-M1 III. Does Rode VideoMic GO II work well with E-M1 III? Is an additional cable required? Is the Rode VideoMic GO II better than the built in microphone on the Olympus E-M1 III?

A: Yes, the Rode VideoMic GO II and Fur Windshield Kit is compatible for use with the Olympus OM-D E-M1 Mark III Mirrorless Camera and would provide an upgrade in audio capture quality to the built-in microphone in the camera. The VideoMic GO II requires plug-in power from the E-M1 microphone input connection and includes the necessary 3.5mm cable with its purchase.

Q: 6. Can i use an iphone charger (lightning to USB C) to connect to an iPhone or does it require cable from rode?

A: The Rode SC15 Lightning USB Type-C to Lightning Accessory Cable (BH #ROSC15) is the recommended cable solution for connecting the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone to an iOS device with Lightning connectivity: https://bhpho.to/3sSRVBr

Q: 7. How can you plug it into IPhone ? Does it need an adapter or directly ?

A: You can connect the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone to an iPhone by using the Rode SC15 Lightning USB Type-C to Lightning Accessory Cable (B&H # ROSC15). The SC15 cable will allow you to connect the mic directly to the iPhone and then use the mic's 3.5mm jack for headphones to monitor the audio while recording.

Q: 8. If used with an iPhone, will the phone's speaker work while in use?

A: No. When an external microphone is connected to the iPhone, the internal speaker is muted. You can use an adapter like the RODE AI-Micro USB-C Audio Interface (B&H # ROAIMICRO) which includes a Lightning adapter and provides two mic inputs and a headphone output. The RODE VideoMic GO II Analog/USB Camera-Mount Shotgun Microphone is compatible. We do also have other options for mobile interfaces that will work in the same manner. Please feel free to contact us by phone or through live chat on the website and we will be happy to help you select the best option for your application.

Q: 9. Would using a usb-c to 3.5mm input adapter allow headphones to be plugged in to the mic directly when using it on a camera?

A: No, unfortunately not. The USB-C output on the Rode VideoMic GO II is a digital output only and it does not have any sort of preamp built-in to accommodate a headphone signal.

Q: 10. Does this come with a wind shield/screen?

A: Yes, the Rode VideoMic GO II Ultracompact Analog/USB Camera-Mount Shotgun Microphone includes a foam windscreen with purchase. For extra wind protection, the VideoMic GO II is also available bundled with a windshield as BH #ROVMGIIDWK: https://bhpho.to/3r4ZkNc