Plano Tx Stereo Receiver Hdmi

Muxlab 4k60 Hdmi-over-ip H.264/h.265 Poe Receiver V2

Product Code: ga224418
Availability: In Stock

$1,571.85 $2,483.52

Qty

0 reviews Write a review

Description
Reviews (0)

The 4K60 HDMI-over-IP H.264/H.265 PoE Receiver V2 from MuxLab allows you to receive up to a UHD 4K60 signal from up to 328' away over a single Cat 5e/6 cable. It's compatible with the MuxLab 500762-TX, 500763-TX, or 5007640TX transmitters and can be set up in various combinations with Ethernet switches, network controllers, and routers. The receiver then outputs the signal to an HDMI display.

The receiver allows you to create a matrix, video wall, or multiview configurations. With H.264/H.265 codec support, the transmitter allows streaming over a local network or over the Internet for worldwide distribution in a low-bandwidth workflow. It can be controlled via remote applications using the DB9 serial port using RS-232 protocols. Featuring support for Power-over-Ethernet (PD), the transmitter can be powered by a PoE (PSE) Ethernet switch, but it also supports an optional power supply.

For Video Wall/Multiview/Matrix Setups Receive UHD 4K60 Video from up to 328' Compatible with 500762/3/4 Transmitters Optical S/PDIFAudio Output Low-Latency H.264/H.265/MJPEG Support RS-232 Remote Control Power via PoE or Power Adapter

Interfaces
Outputs	1x HDMI (HDMI 2.0) Female 1x TOSLINK (S/PDIF) Female 1x 1/8" / 3.5 mm TRS (Stereo Audio) Female
Embedded Audio Output	HDMI
Other I/O	1x USB-A 3.0 / 3.1/3.2 Gen 1 Input 1x RJ45 10/100 Ethernet Input/Output 1x 1/8" / 3.5 mm IR Output 1x DE-9/DB-9 RS-232 Input/Output
Standards
HDR Support	Yes
HDCP Support	Yes
EDID Support	Yes
Transmission
Max Transmission Distance	UHD 4K at 60 Hz: 328.1' / 100 m (via Cat 5e/6)
Video Format	HDMI (4:4:4) UHD 4K: 60 fps
Supported Cable Types	Cat 5e/6
Latency	200 ms
Power
Power I/O	1x Barrel Input
PoE Support	PoE 802.3af
Power Consumption	Device: (4.5 W)
Environmental
Operating Temperature	32 to 72°F / 0 to 40°C
Storage Temperature	-4 to 185°F / -20 to 85°C
Operating Humidity	95%
Storage Humidity	95%
General
Certifications	CE, FCC, RoHS
Dimensions	4.4 x 3.6 x 1" / 111 x 92 x 25 mm
Weight	14.1 oz / 400 g
Packaging Info
Package Weight	0.87 lb
Box Dimensions (LxWxH)	8 x 5.9 x 2.2"

Compatible with the 500762-TX, 500763-TX, and 500764-TX transmitters
Supports up to 4K60 4:4:4 video streams
Supports up-scales 1080p60 video streams from transmitter and other devices up to 4K60
Supports video wall and multiview capabilities
H.264/H.265 video codec support for low-latency LAN and Internet transmission
Supports SPDIF (TOSLINK) audio out
RS-232 and directional IR for remote control of end devices
PoE powered, via PoE (PSE) Ethernet switch
Managed via Pro Digital Network Controller (500812) and Muximus Network Controller (500813)

Related Questions and Answers

Q: 1. Can this take 3 sdi inputs and put hdmi 1 as multiview and hdmi 2-4 as crossover?

A: The Decimator MD-Cross V2 only has one 3G-SDI and one HDMI input. For outputs, the MD-Cross V2 has one HDMI, and three 3G-SDI outputs with one of the three being an Active-loop through.

Q: 2. Its compatible with the NP-F960 battery?

A: Yes, the FeelWorld S55 V2 5.5" 4K HDMI Monitor (Version 2) works with SONY Style NP-F batteries also called L-Series. Yes, the Feelworld display will work with your NP-F960 battery.

Q: 3. Hello, I’m using (2) Sony FS7 cameras and would like to convert them from 23.98 PSF to 1080i. Would I need 2 units?

A: Yes, two individual DECIMATOR MD-Cross V2 Miniature HDMI/SDI Cross Converters would be required to handle more than one signal at a time. If it was one signal and you split the output, this would only require one.

Q: 4. If I send a 4k signal in via HDMI, can it send a 4k signal out via SDI?

A: No, sorry Lucas

Q: 5. Can I record video while connected to a display via HDMI?

A: The Minolta MN4KPRO UHD 4K60 Autofocus Pro Camcorder Kit will provide a live HDMI out.

Q: 6. Can the waveforms be made full screen or are they only small in the corner?

A: No, the waveforms cannot be made full screen on only small on the Cornerikan VXF7 7" HDMI/SDI On-Camera Monitor V2 with Tally. It will only be small in the corner.

Q: 7. Will this unit convert 720p SDI in to 1080i SDI out?

A: Yes -- just tested it with 720p from my laptop, converting to 1080i on an HD monitor. This uses the scaler function.

Q: 8. Is this compatible with the Canon R5?

A: Yes.

Q: 9. Hi a a previous review said "This is a great scaler for broadcast and SMPTE purposes. Unfortunately it cannot scale a native computer resolution of 1920 x 1200 (16x10)" can some confirm this for me please? thanks

A: That is correct, the DECIMATOR MD-Cross V2 Miniature HDMI/SDI Cross Converter does not scale to a 1920 x 1200 resolution. The DECIMATOR 12G-CROSS 4K HDMI/SDI Cross Converter with Scaling and Frame Rate Conversion(BH #DE12GCROSS) should be able to scale to your desired 1920 x 1200 resolution. See: bhpho.to/3f3fKSV

Q: 10. The "Overview" says it can support UHD @60 but the "Specs" say it can only do UHD @30... which one is correct?

A: According to FeelWorld, the FeelWorld S55 V2 5.5" 4K Touchscreen HDMI Monitor does 4K60p. I have alerted the B&H web department to the error.

There are no reviews for this product.