Muxlab Hdmi 4k/st2110 Over Ip Uncompressed Gateway Receiver
- Product Code: ga224419
-
Extend an HDMI signal up to 1300' using fiber connectivity with the HDMI 4K/ST2110 over IP Uncompressed Gateway Receiver from MuxLab. This unit allows you to receive up to a UHD 4K60 signal from up to 1300' away over a LAN or a fiber connection. It's compatible with the separately available MuxLab 500774-TX transmitter and can be set up in various combinations with Ethernet switches, network controllers, and routers. The receiver then outputs the signal to an HDMI display.
The receiver supports uncompressed 4K30 video and SMPTE ST-2110 video over IP, and it features a 1G Ethernet port for management and two 10G fiber ports that support long-distance video/audio transmission up to 1300'.
Extend HDMI Signal over IP up to 1300' Supports up UHD 4K60 and SMPTE ST-2110 Compatible with 500774-TX Transmitter HDMI 1.4 Output to Display 1 x RJ45 1G & 2 x SFP 10G Ethernet Ports Power via PoE or Power Adapter
Interfaces | |
---|---|
Inputs | 2x SFP (Fiber) Female |
Outputs | 1x HDMI (HDMI 2.0) Female |
Embedded Audio Output | HDMI RJ45 |
Other I/O | 1x RJ45 10/100/1000 Ethernet Input/Output |
Standards | |
HDR Support | Yes |
HDCP Support | Yes |
EDID Support | Yes |
Transmission | |
Max Transmission Distance | UHD 4K at 30 Hz: 1312.3' / 400 m (via OM4 Multi-Mode Fiber) UHD 4K at 30 Hz: 984.3' / 300 m (via OM3 Multi-Mode Fiber) |
Video Format | HDMI (8/10-Bit 4:4:4/4:2:2) UHD 4K: 60 fps |
Supported Cable Types | Cat 5e/6 UTP Multi-Mode Fiber |
Power | |
Power I/O | 1x Barrel Input |
PoE Support | Yes |
Power Consumption | Device: (15 W) |
Environmental | |
Operating Temperature | 32 to 72°F / 0 to 40°C |
Storage Temperature | -4 to 185°F / -20 to 85°C |
Operating Humidity | 95% |
Storage Humidity | 95% |
General | |
Certifications | CE, FCC, RoHS |
Dimensions | 6.9 x 4.4 x 1" / 175 x 111 x 25 mm |
Weight | 1.5 lb / 700 g |
- Supports uncompressed HDMI video up to 4K30 (4K 4:4:4 8-bit and 4K 4:2:2 10-bit) and SMPTE ST-2110
- Supports ST-2022-7 (Class D) data link redundancy
- Extend HDMI over an IP network at up to 1300' over duplex OM4 multi-mode fiber
- Supports hundreds of transmitters and receivers depending on network bandwidth
- Supports point-to-point, point-to-multipoint and multipoint to-multipoint applications
- Supports two 10G Ethernet ports for redundant audio/video signal transmission
- Supports a 1G Ethernet port for 3rd party unit control
- Audio insert (TX) and audio extract (RX) ports (future use)
- RS-232 for remote control of end devices (TX side)
- Manage with 3rd party control software platforms supporting a Rest API and NMOS (IS-04 and IS-05)
Related Questions and Answers
Q: 1. What’s is The transmitting latency with this new design?
A: Hi Jason, the latency is 80ms.
Q: 2. Will this work with an android tablet like Amazon Fire/Samsung A- series? I don't want an iPad.
A: The Hollyland Mars 400S PRO Kit can use the Hollyview app, which is available for both iOS and Android OS.
Q: 3. 400 S Pro can you use it for live streaming with magewell capture card ?
A: Yes, you can connect the Hollyland Mars 400S Pro Receiver to the Magewell Capture Card for live streaming.
Q: 4. can I use a 400s pro transmitter to a 400s receiver for better latency ? I already have a 400 s
A: Hi John, sorry that Mars 400S Pro transmitter can not work with Mars 400S receiver.
Q: 5. will this series be compatible to receive or send signal to the original 400s?
A: From what I can find, there is no official information saying you can connect them together and I would assume not.
Q: 6. They came with batteries
A: The Hollyland Mars 400S PRO SDI/HDMI Wireless Video Transmission System comes with a DC power adapter. You need to purchase batteries or another DC Power adapter to power the other unit.
Q: 7. What's the run time using the watson npf 770 battery?
A: Using the Watson NP-F770 Lithium-Ion Battery Pack (7.4V, 4400mAh), the transmitter will run for almost 3 hours and the receiver will run for about 4.5 hours.
Q: 8. Whats the difference with the new 300 pro?
A: Hi Steve, ① The Mars 400S Pro supports both SDI and HDMI the Mars 300 Pro supports Dual HDMI ②The bitrate of the streaming is 12M bps to provide a higher definition of monitoring video quality for Mars 400S Pro, while Mars 300 Pro is 8M bps. ③The Mars 400S Pro supports Direct Video Feed, pls refer to https://www.hollyland-tech.com/products/detail-46.html or leave a msg on Hollyland Support Section.
Q: 9. Hi, can I send a signal from a transmitter to two receivers or more?
A: Hi Mauel, yes the Mars 400S Pro supports 1 transmitter to 2 receivers.
Q: 10. Does this signal transmit/receive with encryption? If so, how secure is the signal?
A: The Hollyland Mars 400S TX/RX does not have built-in encryption.
Top Bestselling Products
Iogear Wireless Hdmi Transmitter And Receiver Kit
$689.97 $1,021.16
Kramer Hdmi Over Twisted Pair Receiver
$576.00 $777.60
Pyle Pro Pda99bu 2-channel A/v Receiver With Bluetooth
$449.97 $643.46
Cabletronix Hdmi Extender Transmitter And Receiver Kit
$255.00 $346.80
Accsoon Cineview 2 Sdi/hdmi Wireless Video Receiver
$777.00 $1,056.72
Kramer 4k Hdr Hdmi Receiver With Rs-232 & Ir Over Hdbaset
$912.00 $1,331.52
Avenview Hdmi Unlimited Lan Receiver Over Single Cat6
$268.50 $418.86
Vigillink 2x1 Hdmi Hdbaset Receiver And Wall Switcher Extender Set
$3,600.00 $5,652.00
Vaxis Storm 3000dg Wireless Receiver (gold Mount)
$11,700.00 $14,859.00
Aten 1080p Hdmi Extender Receiver Over Ip Catx Cable
$1,648.50 $2,423.30
Aten Ve802r Hdmi Hdbaset-lite Receiver With Poh (class B)
$581.85 $861.14
Gefen Ext-uhd-lans-rx 4k Hdmi Over Ip Receiver
$1,139.85 $1,778.17
Smart-avi Hdx-w100 Hdmi Over Cat5e/6 Wall Plate Receiver
$392.25 $506.00
Datavideo Hbt-6 Hdbaset To Hdmi Receiver
$957.00 $1,416.36
Smart-avi Hdx-rx100 Hdmi Receiver
$477.00 $591.48
Muxlab Hdmi Extender Kit
$149.85 $179.82
Cinegears Ghost-eye Wireless Hdmi & Sdi Video Transmission 200m Pro Kit
$10,080.00 $12,801.60
Muxlab Uhd-4k Hdmi Over Hdbaset Lite Extender Kit With Poe
$857.85 $1,038.00
Products You May Like
Winsted Single Electrical Box Mounting Kit
$404.85 $502.01
Pspaudioware Psp 2445 Emt Vintage Reverb Plug-in (download)
$447.00 $634.74
Heden Drive Gear For M21ve And M21ve-l Motors (0.8 Mod, 1" Wide)
$555.00 $888.00
Sony Fe 100-400mm F/4.5-5.6 Gm Oss Lens
$6,747.00 $10,322.91
Klipsch Reference Premiere Rp-1200sw 12" 800w Subwoofer
$2,997.00 $3,686.31
Countryman E6i Omnidirectional Earset Head-worn Microphone (beige)
$1,694.85 $2,237.20
Godox Softbox With Bowens Speed Ring And Grid (23.6 X 23.6")
$184.59 $276.88
Ultimate Support Js-mms1 Mini Tripod Tabletop Stand/clip
$38.97 $54.56
Profoto Soft Bounce For A1 Flash
$447.00 $590.04
Yc Onion Shade And Bracket Accessory Bundle For Yolobox Pro Cage
$387.00 $464.40
Rosco Roscosleeve T5 X 60"(#112 Opal Tough Frost)
$91.35 $135.20