Gateway Computer Hdmi Port

Muxlab Hdmi 4k/st2110 Over Ip Uncompressed Gateway Transmitter

Product Code: ga224420
Availability: In Stock

$5,489.85 $8,564.17

Qty

0 reviews Write a review

Description
Reviews (0)

Extend an HDMI signal up to 1300' using fiber connectivity with the HDMI 4K/ST2110 over IP Uncompressed Gateway Transmitter from MuxLab. This unit allows you to transmit up to a UHD 4K60 signal from up to 1300' away over a LAN or a fiber connection. It's compatible with the separately available MuxLab 500774-RX receiver and can be set up in various combinations with Ethernet switches, network controllers, and routers. The receiver then outputs the signal to an HDMI display.

The transmitter supports uncompressed 4K30 video and SMPTE ST-2110 video over IP, and it features a 1G Ethernet port for management and two 10G multi-mode fiber ports that support long-distance video/audio transmission up to 1300'. An RS-232 terminal port allows you to remotely configure and control the unit.

Extend HDMI Signal over IP up to 1300' Supports up UHD 4K60 and SMPTE ST-2110 Compatible with 500774-RX Receiver HDMI 1.4 Input 1 x RJ45 1G & 2 x SFP 10G Ethernet Ports RS-232 Remote Control Power via PoE or Power Adapter

Interfaces
Inputs	1x HDMI Female
Embedded Audio Input	HDMI: 2-Channel
Outputs	1x HDMI Female 2x SFP (Fiber) Female
Other I/O	1x RJ45 10/100/1000 Ethernet Input/Output 1x Block 3-Pin RS-232 Input/Output
Standards
HDCP Support	Yes
EDID Support	Yes
Transmission
Max Transmission Distance	UHD 4K at 30 Hz: 1312.3' / 400 m (via OM4 Multi-Mode Fiber) UHD 4K at 30 Hz: 984.3' / 300 m (via OM3 Multi-Mode Fiber)
Video Format	HDMI (8/10-Bit 4:4:4/4:2:2) UHD 4K: 60 fps
Supported Cable Types	Cat 5e/6 UTP Multi-Mode Fiber
Power
Power I/O	1x Barrel Input
PoE Support	Yes
Power Consumption	Device: (15 W)
Environmental
Operating Temperature	32 to 72°F / 0 to 40°C
Storage Temperature	-4 to 185°F / -20 to 85°C
Operating Humidity	95%
Storage Humidity	95%
General
Certifications	CE, FCC, RoHS
Dimensions	6.9 x 4.4 x 1" / 175 x 111 x 25 mm
Weight	1.5 lb / 700 g

Supports uncompressed HDMI video up to 4K30 (4K 4:4:4 8-bit and 4K 4:2:2 10-bit) and SMPTE ST-2110
Supports ST-2022-7 (Class D) data link redundancy
Extend HDMI over an IP network at up to 1300' over duplex OM4 multi-mode fiber
Supports hundreds of transmitters and receivers depending on network bandwidth
Supports point-to-point, point-to-multipoint and multipoint to-multipoint applications
Supports two 10G Ethernet ports for redundant audio/video signal transmission
Supports a 1G Ethernet port for 3rd party unit control
Audio insert (TX) and audio extract (RX) ports (future use)
RS-232 for remote control of end devices (TX side)
Manage with 3rd party control software platforms supporting a Rest API and NMOS (IS-04 and IS-05)

Related Questions and Answers

Q: 1. The specs mention UHD, but if I'm shooting a project in DCI 4k 4096 X 2160 will this unit work or can I only use it for UHD?

A: No, the signal supported can only be HDMI UHD 4K30 or 1080p: 60 when using the Hollyland Mars 4K Wireless Video Transmission System.

Q: 2. Are these transmitters compatible with the Mars 400 Pro? To receive and transmit obviously in 1080p?

A: The Mars 400 is not compatible with the Hollyland Mars 4K Wireless Video Transmission System. However, the Mars 4k can work with the Mars 400 S PRO, Mars 300 PRO, and the Mars M1 display.

Q: 3. If im sending a 29.97 signal to the HDMI input and I want to exit via SDI will it still be 29.97?

A: Yes, When sending a 29.97 signal to the HDMI input it will output from the SDI port at 29.97.

Q: 4. Can I connect the transmitter to an atomos v monitor instead that connecting directly to the camera and then able to put the receiver in a different monitor?

A: Yes, you can connect any transmitter to an ATOMOS Ninja V Monitor because there is a HDMI Loop Out on the monitor. You can also connect a receiver to a different monitor.

Q: 5. Can I use both the HDMI and SDI outputs at the same time? Ex: SDI going to client monitor and HDMI into El Gato / Computer?

A: Yes, the HDMI, SDI can be used simultaneously on the Hollyland Mars 4K Wireless Video Receiver.

Q: 6. Can I connect one transmitter to 2 receivers plus one app?

A: No, the Blackmagic Design ATEM SDI Switcher is a 1 to 1 system regarding the transmitter and receiver. You can transmit to 1 receiver + 2 apps.

Q: 7. Can I use a Hollyland Mars 4K Transmitter with a Mars 400 HDMI receiver? Setup would be - Red camera uses the SDI port on transmitter and HDMI port on the receiver.

A: The Hollyland Mars 4K Wireless Video Transmitter is not compatible with the Mars 400.

Q: 8. Do these devices need a battery pack to function?

A: The Hollyland Mars 4K Wireless Video Transmission System comes with two wall power adapters included to power both the TX and RX. However, you will need to add batteries if you cannot be wired to wall power, like these: Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit (B&H # GENPF770CS)

Q: 9. How long would a 10050mah battery last on these if I had it transmitting from my laptop to BenQ monitor?

A: The Hollyland Mars 4K Wireless Video Transmission System will get approximately 8.5-10 hours with an 10,050mAh NPF battery.

Q: 10. What is the case material?

A: The housings for the TX and RX of the Hollyland Mars 4K Wireless Video Transmission System are made from aluminum.

There are no reviews for this product.