The Coiled Cable for Universal Handgrip System from DENZ enables you to trigger the on/off function of select cameras when using the universal 15mm/19mm handgrip rig. This coiled cable has a 4-pin LEMO connector on one end and a Fischer connector on the other.

For DENZ 15/19mm Universal Handgrip Rig    Connectors: 4-Pin LEMO to Fischer    Contoured Wooden Grip, On/Off Button    ARRI/Hirth-Style Rosette Mount

Related Questions and Answers

Q: 1. Is the fluid head removable for a slider?

A: While the head is removable, the 65mm Bowl Design is not one that can be used on a slider. You would not be able to use this tripod in that way. The Benro S4 Tripod System would be a better option, B&H # BEA2573FS4. This has a leveling platform that will allow you to remove the Flat Base Head and put it on the slider. You would even be able to mount the slider on to the tripod directly.https://bhpho.to/2ejQKqo

Q: 2. A small rig universal baseplate will work with this tripod?

A: Yes, you would be able to connect a SmallRig Universal Baseplate to the top of this tripod.

Q: 3. Is the carry case strong enough to travel with? I work for a soccer team and we regularly fly. I checked the last one and the case held up well but this one seems thin... Anyone have any experience with it?

A: The soft case is great for keeping the tripod clean and dust free but would recommend a hard case for traveling it might get smashed or broken that is my opinion I hope this helps with your question.

Q: 4. Does the pan lock knob hit the leg hinges when it's tightened? I've had similar looking tripods that have this issue, making it impossible to fully tighten depending on the location of the knob.

A: That should not happen with this tripod.

Q: 5. There is a threaded hole on the vertical part of the grip...what is this for?

A: The threaded hole in the Leica Q2 Monochrom Handgrip accepts the Leica Finger Loop for Handgrip M (Medium) https://www.bhphotovideo.com/c/product/894863-REG/Leica_14647_Finger_Loop_For_Multi_Function.html

Q: 6. in field, we need to put down camera on surface ( carpet/stone/compound side wall), Dust/sand/things like that could be jammed in bottom open grew. any such issue expected or a way to get cleaned later if needed?

A: As a former movie camera assistant, I would avoid putting the camera on harsh surfaces by laying down a clean camera carpet, or a tarp or by using a tripod head on a high-hat stand. If you do have to put it on dirt, be prepared with a small brush and/or blower to clean out the detritus.

Q: 7. Does the hand grip attached to the Leica Q2 fit into a Billingham 72 bag?

A: According to our data, a Leica Q2 with the Q2 Handgrip, should measure approximately in camera height 3.5", which is what Billingham has listed as their internal bag depth (which should be equal or less than 3.5", when positioning the camera into the bag as they picture - camera on its side, which would take the camera's height measurement for the bag's depth). We do not carry the Billingham 72 camera bag, but according to our data, the Leica Q2 with Q2 handgrip, should just fit, though it may be a tight fit.

Q: 8. Does the Leica Q handgrip fit the Q2?

A: No, I will post a link to the correct one for the original Leica Q. https://www.bhphotovideo.com/c/product/1160032-REG/leica_19505_leica_q_handgrip_for.html

Q: 9. Is the attachment screw a "captive" type screw?

A: The screw on the Leica Q2 Handgrip is non removable and always remains attached to the grip.

Q: 10. How does one hold the gimbal ring with the grips? Do the grips hold the weight? Or does one hold the ring? And if one holds the ring, isn’t the grip too far off to control iris / focus while trying to carry the gimbal ring?

A: This is designed to handle the weight of the gimbal and you would hold the Nucleus Handles once attached.