Surveillance Camera On Power Pole

Dotworkz 12v Outdoor Power Pack And Pole-mount Kit For Select Cooldome Camera Enclosures And Xero Nvr

Product Code: ga22454
Availability: In Stock

$1,679.85 $2,654.16

Qty

7 reviews Write a review

Description
Reviews (7)

The 12V Outdoor Power Pack and Pole-Mount Kit from Dotworkz is designed to power D2 COOLDOME, D3 Single Cooler COOLDOME, and S-Type COOLDOME camera enclosuresand includes a Xero NVR. The kit attaches to the back of an enclosure and can be then mounted onto a structural post or pole utilizing its three band straps.

AC Input Auto Range IP67-Rated Power Supply Built-In Active PFC Function Mounts onto Any Pole

Parameters
Compatibility	D2 COOLDOME, D3 Single Cooler COOLDOME, and S-type COOLDOME camera enclosures and Xero NVR
Power	12 V
Frequency	60 kHz
Rating	IP67-rated power supply
Protection	Temperature Protection: 105°C at ±5°C (TSW1)
Packaging Info
Package Weight	10.05 lb
Box Dimensions (LxWxH)	14.1 x 8.4 x 6.7"

AC input auto range

IP67-rated power supply

Built-in active PFC function

Protections: Short circuit / overload / over voltage

Over temperature protection

Shut down O/P voltage, repower after cooling

Fixed switching frequency at 60 kHz

100% full load burn-in test

Related Questions and Answers

Q: 1. What is the cable length?

A: With the two parts connected, cable length should come in at approximately 6 feet.

Q: 2. The description doesn't include the part that connect to the pole, which shown in the picture. Is it included?

A: Yes. All you need is the pole and you are good to go.

Q: 3. What is the internal camera volume? Trying to find a housing that would fit a VEO 410 high speed camera, which is 5x5x5 inches.

A: The Dotworkz S-Type COOLDOME 12 VDC Active Cooling Camera Enclosure with Stainless Steel Arm (B&H # DOSTCDSS) will not accommodate your VEO 410 high-speed camera. The internal camera’s installation area dimensions are no larger than 3.75 x 5.0 x 13" (H x W x L).

Q: 4. This absolutely does not fit into my Black Magic 4k Production Camera... Could this listing's description be wrong?

A: It should. You could contact Support for assistance.

Q: 5. What is the HS Tariff Code and Country of Origin for this KT-MIC?

A: The Dotworkz KT-MIC Outdoor Microphone Kit BH #DOKTMIC is made in the USA. Please contact the manufacturer directly for the HS tariff code: Dotworkz: Tel: 866-575.4689 or 619-639.9914 Website: http://www.dotworkz.com/

Q: 6. Is this compatible with the Luxli Viola? I know its the right Voltage and Amperage, not sure if its the right plug

A: This product is for SmallHD Monitors. We are not aware of it being compatible with Luxli Viola lighting. We currently recommend the Watson Pro 12V 2A Power Supply (2.1mm) for the Luxli Viol. You could try this instead, BH #WAPS12V2A21. https://bhpho.to/2JoDttP

Q: 7. Does it work with the Blackmagic Micro Studio Camera 4k?

A: Yes, it works with that camera.

Q: 8. Will this PS work with the BM Smartview HD?

A: Yes, this power supply will work with the SmartView HD.

Q: 9. Would this work for the ATEM Mini Pro?

A: The correct power supply is this. Blackmagic Design International Power Supply for Video Assist 12G (12 VDC, 36W) BH #BLPWRSPVA12G • MFR #PSUPPLY-12V36WLOCK

Q: 10. Will this power the Blackmagic micro cinema camera?

A: Yes it will.

John	04/09/2024
I have dozens of antique glass negatives from my grandfather who was a newspaper photographer from the 1920's. They had not been well stored but many are in good condition, and now as I digitize them, I can put them in a quality safe envelope. 5

SWFLGamecock	04/08/2024
Such a great mount for all GoPro users. This mount will fit on any stick or pole, with or without threads. Great for an old broomstick or extension painters pole. The mount has nuts/bolts to tighten the base on to a pole that doesn't have threads. I use this mount for my kayak to get overhead shots when fishing. Very durable for saltwater, as most RAM products are. Lightweight and easy to adjust. 5

Fishingmusician	28/07/2024
I needed a way to mount my GoPro camera off to the side of my kayak to give a different view when I'm fishing. The mount fits a GoPro perfectly on the camera end and all you need is handle or dowel of some sort to fit the other end. One quick trip to the Home Depot solved that problem, the dowel I found was just the right size. I painted and shellacked the dowel and fitted it to the camera mount and I was in business. Be aware that you'll need a RAM base or some other kind of base for the non-camera end. Tested it out in my sideyard, works good and will get it out on the lake soon. B&H is the fastest shipping I know of. Rate them and this product very highly. 5

OldDave	01/07/2024
This is a nice universal mount. I have it on the end of a six foot pole. I think this will be my favorite mount. 5

Hugh	26/06/2024
Looking forward to using this product mount with my GoPro. Very vesitle! 5

Derrick	27/05/2024
I purchased this power supply for both my BM MIcro video cam and the BM monitor assist. Both these BM products burn up a lot of batteries so I can now plug in using the power supply whenever the opportunity presents itself. 5

Christopher	19/05/2024
I realize this is likely a rarely purchased item, but I acquired about 50 glass negatives from the early 1900s. Super fragile and easy to break, I wanted to protect them further within the special box I purchased to store them in. These are great - non-acidic and easy to fold - they loosely hold the negative without damaging it while keeping dust away. I just wish these were kept in stock and easier to get shipped quickly is the only negative. Surely the company that makes these have backstock on hand, yes? 5