The D2-CD-T 12V COOLDOME Enclosure with Active Cooling and Vandal Tough Tinted Lens from Dotworkz is designed with active on-board and thermostatically controlled air conditioning, to protect both cameras and other system related hardware in one easy to install engineered form factor. It is designed as complete outdoor solution housing for advanced camera system deployments in hot environment where temperatures exceed 105°F (41°C) but reaches as high as 155°F (68°C). The COOLDOME will protect the camera inside the enclosure up to 158°F (70°C) ambient temperature. The differential between the ambient temperature and the temperature inside the COOLDOME Enclosure can be as much as 45°F (25°C).

The COOLDOME Active Cooling technology offers outdoor camera protection system designed to protect the camera from extreme heat and direct sunlight. The COOLDOME is engineered for climates where heat damage can occur. It is IP66 rated, integrated IP68 waterproof cable ports, airtight, and sealed against outside air, dust, and salt water. Internal mounting space designed for routers, cell networks, hard drives, UPS, WiMax, and mesh hardware.

COOLDOME thermostatically-controlled active cooling technology

Provides protection up to 158°F (70°C) with a difference of up to 45°F (25°C) with the ambient temperature

Virtually indestructible Polycarbonate Thermal Plastic alloy material

Integrated Dual Layer (Foil/Foam) Internal thermo-blanket protects electronics from solar-heat and UV Rays to reduce solar-loading and protects from cold weather conditions, creating a stable internal camera environment

Internal bracket included for PTZ, megapixel, or mini dome cameras

Switchable upper and lower camera mounting locations for maximum versatility and internal storage space utilization

IP66 rated, airtight, and sealed against outside air, dust, water, and salt water

Includes IP68 waterproof connection ports

Related Questions and Answers

Q: 1. Is the enclosure compatible with Panasonic WV-S6130?

A: Dotworks claims that their enclosure is compatible with all ptz cameras.

Q: 2. Is this the same as the Dotworkz PTZO-BASE enclosure that is listed on their site as compatible with a PTZOptics PT30X-SDI?

A: Yes, the Dotworkz D2-BASE will be compatible with the PTZOptics PT30X-SDI.

Q: 3. Is this compatible with the Sony SRG-X400?

A: The enclosure is designed for Surveillance IP cameras, is it difficult to say if it is able to handle a Professional Video PTZ camera. Dimension wise it appears that the camera would fit. But the product is not designed for this type of camera.

Q: 4. Is this compatible with PTZ PT20X-4K-G3?

A: TheDotworkz D2 Base Model Camera Enclosure with Extended Size External Lens (BH #DOD2BASEEXT) will work with the PTZOptics Move 4K SDI/HDMI/USB/IP PTZ Camera with 20x Optical Zoom (B&H # PT20X4KGYG3).

Q: 5. Using PTZOptics camera, what are the tilt limitation while? Does the enclosure restrict horizontal or upward line of sight?

A: The exact specs for how much you can tilt are not listed, however a system like this will limit you. You are going to be very limited to how much you can tilt upwards with a camera installed in this system.

Q: 6. What is the internal camera volume? Trying to find a housing that would fit a VEO 410 high speed camera, which is 5x5x5 inches.

A: The Dotworkz S-Type COOLDOME 12 VDC Active Cooling Camera Enclosure with Stainless Steel Arm (B&H # DOSTCDSS) will not accommodate your VEO 410 high-speed camera. The internal camera’s installation area dimensions are no larger than 3.75 x 5.0 x 13" (H x W x L).

Q: 7. Is the lens transparent to near infrared light?

A: The dome will pass IR light.

Q: 8. Will this model work with a AW-HE40HW PTZ Panasonic camera for Live Streaming Broadcast to protect camera from room dust, physical damage, etc.? To be located on back wall, 12ft off basketball gym floor and 90 ft away from subjects on a stage for P&W services on Sunday mornings. Basketball court is used 3-5 days/week by Boys & Girls club, Upward Basketball league, youth & children’s sports, etc. Dennis

A: Per Dotworkz: The Dotworkz D2 Base Model Camera Enclosure IP68 (D2-BASE) is compatible with all PTZ, Dome, Mini Dome, 360°, 180°, and Multi Sensor Camera Brands. The Dotworkz D2 Base Model Camera Enclosure IP68 (D2-BASE) fits a security camera, NVR, router, and environment specific hardware inside the durable, impact resistant, and weatherproof protective thermal plastic polycarbonate housing. Highlighted Features: IP and analog camera compatible Vari-Fit internal bracket included for perfect fit Impact Resistant Polycarbonate Thermal Plastic IP68 rated against dust, water, and salt water air. IP68 (water proof) connection ports Environmental options for virtually all applications Heavy-duty lower lens for impact resistance

Q: 9. can you please update the mechanical dimentions Dotworkz D2 active cooling ?

A: We are working on adding the specifications from Dotworkz to page.

Q: 10. Is it compatible with JVC KY PZ100?

A: Yes this will fit the JVC KY PZ100