Provide uninterrupted power to your equipment with this 15V/20A AC Power Supply with V-Mount Battery Eliminator Plate Kit from IndiPRO Tools. This kit comes with an AC power supply unit and a V-mount battery eliminator plate.

The 100-240 VAC power supply features a 10' long standard cable that can directly power your light, camera, or other gear using its 4-pin female XLR connector with 15 VAC, 20A output. The V-mount battery eliminator/dummy plate can also be mounted onto your camera, light, or accessory that features a V-mount plate. The eliminator plate also features a splitter with four D-Tap outputs to power accessories.

15V/20A Power Supply with 10' AC Cable    V-Mount Battery Eliminator    4-Pin XLR Connector on Plate    4 x D-Tap Outputs to Power Accessories    Power Direct from AC or via Dummy Plate

Related Questions and Answers

Q: 1. How long does the battery last when shooting 4k?

A: With this 95Wh battery you should get between 5 to 6 hours of recording time.

Q: 2. Does it work with the fs7's xdca back extension unit?

A: Yes. The following batt is 100% v-mount compatible.

Q: 3. Does anyone know how long this will power a Fiilex 360 light?

A: The light draws 80w. The battery gives 95w per hour. So you will get about 70-80 minutes.

Q: 4. Can you ply this right into the BOCC4k for power the way it comes? Or would I hav etc purchase a Dtap connector ?

A: This plate features a 2.5mm connector that is hard wired directly from the plate so there will be no need to purchase a separate d-tap connector for the camera. The plate does feature an additional d-tap port so if you wish to power another device than you would need to buy a separate d-tap cable.

Q: 5. Will these be sufficient for the Aputure 300D II?

A: From the manufacturer. Yes. The IndiPRO Tools Two 95Wh Li-Ion Batteries and Dual Charger Kit (V-Mount) this item BH #IN2VMDCA • MFR #2VMDCA will be sufficient to power The Aputure Light Storm C300d Mark II LED Light Kit with V-Mount Battery Plate this item BH #APLSC300DIIV • MFR #LSC300DIIVKIT

Q: 6. How long does it take to charge?

A: This kit comes with the IndiPRO Tools D-Tap Pro Battery Charger (16.8V, 2.5A), which is able to fully charge a 95Wh battery in approximately 3 hours.

Q: 7. and as for the micro cinema cameras this adapter works also?

A: Yes, it is our understanding this works for both of these cameras.

Q: 8. Does the 15mm rod mounting area on the battery plate have an adjustable angle? For example, can it be turned horizontally instead of vertically?

A: The height can only be adjusted

Q: 9. Does it come with charger?

A: No, it doesn't, but I have had good luck with inexpensive this dual charger.

Q: 10. Is this needed for Solix?

A: This is a V-Mount battery. It is designed to power products that accept a V-Mount battery. We are not quite sure what Solix is referring to, but if it works with V-Mount batteries this is a great option.