The Porta-Com H2000 is a dual-sided headset with a dynamic, noise-cancelling microphone, designed for use with the COM-series of wired intercom systems. This headset has a midweight design with an adjustable headband, and a coiled cable, terminated with a standard 4-pin XLR connector.

2-Channel Wired Intercom System    PC-2000 Powering Console    6 x H-2000 Noise Cancelling Headsets    6 x BP-2000 Beltpacks    B3-2000 Branch Box

Midweight dual headset for intercoms with noise-cancelling dynamic microphone

Standard 4-pin XLR connector, coiled cable

Padded, adjustable headband

High-output, low-impedance headphones and microphone

Related Questions and Answers

Q: 1. Will this work with clearcom systems of the same appearance {not the new age clearcom kit}? I'm talking clearcom 601\701 kit

A: Unfortunately the BP-2000 is only compatible with Portacom components.

Q: 2. Is this system workable through walls?

A: Very unlikely these are intercom systems. If you want something to go through walls. You should look at two way radio's.

Q: 3. Can we use the older model BP-200 and BP-100 with this base station?

A: Hope this will help. We are using the PC2000 as a base with the BP200. Before you replace a base make sure your cables are good. Base will not work with a base cable.

Q: 4. I want to know wether there exists a wired connection between the base station and the slave?-dr Asok

A: Yes, there is a wired connection between the base station and a beltpack. It is a 5 pin XLR connection.

Q: 5. I need a replacement AC power supply. The unit says 24v@1amp, but the AC-20 sold on B&H (https://a href= http://www.bhphotovideo.com/c/product/145516-REG/Porta_Com_AC_20_AC20_AC_Power.html target= _blank www.bhphotovideo.com/c/product/145516-REG/Porta_Com_AC_20_AC20_AC_Power.html/a) is only 750ma, will that be sufficient for this unit?

A: The included AC power supply is the Portacom recommended and compatible Porta-Com product.

Q: 6. Does this Datavideo ITC-100 will work with video switchers different make than Datavideo, like Roland video switchers?

A: I have mine integrated with the Blackmagic ATEM TV Studio using a BMD GPI/Tally unit and a custom wired cable, and the live tally works great but there is no warning (preview) light.

Q: 7. It looks like this kit comes with 20' cables to run from the base station to the individual beltpacks. Is it possible to purchase longer runs? I may need up to a 100' run to my farthest camera position. Thanks!

A: Certainly. A cable such as BH #KOM3100 Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (100', Black) could be purchased to expand the distance of the cable runs in the PortaCom 4-Person Wired Headset Kit with Power Station and Beltpacks.

Q: 8. Can you add some wireless units to this setup?

A: The PortaCom WingMAN 500 Intercom Interface Station, BH #POWM500 can be used to connect this hardwired system to ProtaCom UltraLink or Clearcom wireless stations.

Q: 9. Does it exists a physical wired connection between the base station and the tranmitter or it is a wireless connection? Dr asok

A: It is a wired connection between a belt pack and a base station.

Q: 10. Can this be interfaced with other intercom systems such as the Hollyland T1000?

A: Yes, the Datavideo ITC-100 8-User Wired Intercom System can be interfaced with the Hollyland MARS T1000 Intercom System by using the Hollyland 2/4 Wire Converter for Intercom Systems (B&H # HO24WCONVER).