The Porta Brace CC-HD1 Quick Draw Camera Case (Signature Blue) provides a convenient way to carry and protect your camera on the ground, in the car and in the air. This padded nylon case has hard-shell construction and an aluminum viewfinder guard for protection and security. The case is much lighter and more compact than shipping cases. A double layer of urethane-coated 1000 denier Cordura keeps out moisture and dust.

The top-loading case has a wide open fold back top that stays neatly out of the way. It's lightweight with a rigid frame and saves valuable storage space. The lid closes with touch fasteners for quick opening or it can be secured with zippers. There are two foam blocks for lens and camera side support. The case holds a camcorder with an on-board battery and most wireless configurations attached. The dual purpose rear pouch expands the main compartment 3.0" or it can be an all-purpose pocket. A LI-GLW illumination strip light pocket is included.

Fits Pro Camcorder and Accessories    Holds Camera with On-board Battery    1000D Cordura Nylon Case    "Slip-not" Bottom Panel    Top-loading Design    Crush-proof Aluminum Guard    Expandable Dual Purpose Rear Pouch    Removable, Adjustable, Shoulder Strap    Black Leather Hand Grip

1000 denier Cordura nylon with heavy-duty interior padding

Dirt and skid resistant "slip-not" bottom panel for superior impact cushioning

Rigid, reinforced core resists crushing and puncturing

Top-loading design lets ready-to-use camera slide out quickly

Holds camera with on-board battery attached

Crush-proof aluminum guard protects view finder

• Two foam padded pockets allow for storage of tapes, cables, batteries, tripod plates, etc
• Two exterior slip pockets
•  Dual purpose rear pouch expands the main compartment 3.0" and it can be converted into a utility pouch by closing the barn door flaps

Two foam blocks hold camera in place and provide lens support

Lid closes with touch fasteners for quick opening or secured with zippers.

LI-GLW illumination strip light pocket is included (batteries not included)

• Heavy-duty, removable, adjustable, shoulder strap with shoulder pad
• Black leather hand grip
• Fits in trunk or on car seat and fastens securely using the seat belt and Quick-Draw seat belt loops

• Ikegami DNS-201, DNS-33 camcorders
• Ikegami HDL-V90 camcorders
• Ikegami HL-DV5, HL-DV7WHL-V55, HL-V59, HL-V73, HL-V75W, HL-V77, HL-V77W, HL-V79W camcorders
• JVC GY-DV5001U, GY-DV5000U camcorders
• Panasonic AJ-D200, AJ-D210, AJ-D215, AJ-D400, AJ-D415, AJ-D610, AJ-D610WA, AJ-D700, AJ-D800, AJ-D810, AJ-D900, AJ-D910, AJ-D913 camcorders
• Panasonic AJ-HDC20A, AJ-HDC27A, AJ-HDC27F camcorders
• Panasonic AJ-HDX400, AJ-HDX900 camcorders
• Panasonic AJ-HPX2000, AJ-HPX2100, AJ-HPX2700, AJ-HPX3000, AJ-HPX3700, AJ-HPX500, AJ-HPX502 camcorders
• Panasonic AJ-SDC915, AJ-SDC615, AJ-SDC905, AJ-SDC915, AJ-SDX900, AJ-SPC700, AJ-SPX800 camcorders
• Sony BVW-D200, BVW-D300, BVW-D400, BVW-D600 camcorders
• Sony DNW7, DNW709WS, DNW7P, DNW9, DNW90, DNW90P, DNW90WS, DNW90WSP camcorders
• Sony DSR-130P, DSR-135P, DSR-400, DSR-450 camcorders
• Sony DVW-700, DVW-707, DVW-709WS, DVW-790WS, DVW-970 camcorders
• Sony HDW-700, HDW-730, HDW-730S, HDW-750, HDW-900, HDW-F900, HDW-F900R camcorders
• Sony MPEG-50 camcorder Sony MSW-900, MSW-900P, MSW-970 camcorders
• Sony PDW-510, PDW-510P, PDW-530, PDW-700, PDW-F330, PDW-F350, PDW-F355 camcorders
• Sony UVW-100 camcorder
• Similar size Professional/Broadcast camcorders

Related Questions and Answers

Q: 1. What is the diameter of the plate on the column where the ball head is attached?

A: The diameter of the mounting plate on this column is approximately 2.7".

Q: 2. Does it fit on the glidecam devin graham edition

A: Yes, the Glidecam HD-Pro Universal Quick Release Camera Plate should be compatible with the Glidecam Devin Graham Signature Series Handheld Stabilizer.

Q: 3. Will this plate fit on the Nikon Z cameras if the FTZ adapter is on the camera?

A: No Acratech Quick Release Plate for Nikon Z 7 Camera Body BH #ACQRPZ6Z7 • MFR #221 is not the plate you need if using the FTZ adapter. This is the plate you want for the FTZ adapter... https://www.bhphotovideo.com/c/product/1453486-REG/acratech_2212_quick_release_plate_for.html

Q: 4. This plate came up in a search related to the Z6ii. Will it work with that camera as well, or is it exclusive to the Z7?

A: Yes, this plate will work with the Z6II.

Q: 5. does this fit on the glide cam hd - 4000?

A: The Glidecam HD-4000 does not offer a quick release system. However many people would use a 577 Rapid Connect adapter with the HD-4000. If you have that product on the HD-4000, this plate will work with that.

Q: 6. I have a Kirk FTZ L-bracket mounted on the FTZ adapter. One problem I have is that I cannot have the FTX-Kirk combination mounted at the same time as the current plate (3LT) I have mounted on the Z7 bottom because it interferes with the FTZ plate. So... using this Acratech plate on the Z7, can I keep it on while also taking the FTZ-Kirk combo on and off. See, I'd like to be able to keep the Acratech plate on the camera for when I use the Z lenses, and just switch out when I want to use an F lens.?

A: You would have to try that combination to get a definitive answer.

Q: 7. Does this center column fit to Gitzo GT4552TS tripod?

A: The CC-001 center column is designed to work with the Robus tripod system, and is not compatible with the Gitzo GT4552TS tripod.

Q: 8. Is the screw LENGTH (not diameter) adjustable?

A: The center screw is removable, so you could substitute another of your choice. Alternatively, if it's too long for your purpose, a metal washer inserted as a spacer would solve the problem. It, along with the Vantage 5, has become my favorite tripod that I choose out of a closet of more than a dozen other top drawer tripods. Highly recommended.

Q: 9. Will this fit a Glidecam XR-2000

A: The Glidecam XR-2000 did not have a quick release assembly. However it was very popular to pair that Glidecam model with a 577 Rapid Connect Adapter. If you have BH #MA577 on the XR-2000, this plate will work with it. https://bhpho.to/2Tv3X3j

Q: 10. What is the diameter of the plate? Appears it will fit a Benro tripod. 70mm (nominal)

A: The base diameter is 2.75".