The Dalite 58 x 104" Advantage Manual Projection Screen With CSR (Controlled Screen Return) is a ceiling recessed manually operated screen.

The Advantage is designed with the installation process in mind. It has the luxury of having the case and fabric and roller mechanisms installed separately. Dalite employs a unique floating mounting method which utilizes adjustable roller brackets. All this is built into the lightweight, extruded aluminum case which allows for the centering or offsetting of the screen.

Offered exclusively by Da-Lite, the Controlled Screen Return (CSR) system adds an impressive feature to the Advantage design. The CSR system ensures the quiet controlled return of the screen into the case providing optimal performance and smooth, consistent operation. Screens with the CSR feature must be fully extended. There are no intermediate stopping positions.

Ceiling Recessed    Non-Tensioned    119" Diagonal    HDTV Format    16:9 Aspect Ratio    Matte White

Designed for ceiling recessed installation

Provides optimal performance and smooth consistent operation

Handsome finished white aluminum case provides a clean look and allows easy installation of ceiling tiles

Finished case edges provide a clean look and comfortable build-in of ceiling tiles

Related Questions and Answers

Q: 1. How much more power / light does this output vs Godox TT600? thank you!

A: The following unit has 3x times the power of a dedicated flash unit.

Q: 2. This Godox AD600BM Witstro comes equipped with a Bowens mount. Is there a Godox mount for use with this Godox AD600BM?

A: No, the Godox AD600BM Witstro Manual All-In-One Outdoor Flash only uses modifiers with a Bowens mount.

Q: 3. Does the 'Debug Mode' allow setting a focal length (sent to the camera) when using 'dumb' manual/cinema lenses (ie without ICs in them)?

A: If the lens you are using has electronic contacts for communication with a Canon camera, the Viltrox Mark V EF-E5 Canon EF Lens to Sony E-Mount Body Adapter with OLED Screen will retain the communication for sending focal length information from the lens to the camera. However, the Debug Mode will not allow you to enter your own focal length to send to the camera for EXIF data recording needs.

Q: 4. Can i use pocket wizards to trigger the flash?

A: As the Godox AD600BM Witstro Manual All-In-One Outdoor Flash has a 1/8" (3.5 mm) sync port on the bottom of the light fixture, yes, you may connect a PocketWizard transceiver to the light fixture via a PocketWizard MM1 Miniphone to Miniphone Cable -12", B&H # POCMM16. However, do note you will only have manual control and will need to set the output on the light fixture itself. You would not be able to adjust the output wirelessly using a PocketWizard remote.

Q: 5. Will this work with the sony A7r 4 ?

A: Yes. Simply purchase the Godox transmitter for Sony. Just click the link below to view; https://bhpho.to/2zSi4rM

Q: 6. Does it work with EF-M lens?

A: This adapter does not work with EF-M lenses.

Q: 7. Can i use the Godox X1T on a sony A7RII for trigger instead of the TTL Trigger? I like to keep it simple. Im not a camera pro.

A: The X1T-S for Sony is a TTL trigger like the XPRO-S, just with smaller display and less groups at your disposal. You would be forced to use manual flash control of the AD600BM since there are no TTL functions on it.

Q: 8. Does this work with EF-S lenses?

A: Yes. It works with both EF and EF-S lenses. It also has marked mounting points for both systems - red dot for EF, and white square for EF-S.

Q: 9. Will it work with a Nikon D3400?

A: Yes, Bolt VD-420 Wireless Manual Flash is a universal unit. You can use it on or off the camera hot shoe. Please be aware there is no TTL service, the flash exposure must be set manually.

Q: 10. Does it work on a canon t100 ??

A: No, the Bolt VD-420 Wireless Manual Flash cannot be used with the Canon EOS Rebel T100 DSLR Camera as that camera lacks a center firing pin in the hotshoe.