The Dalite 9 x 9' Advantage Deluxe Electrol Projection Screen has been designed in a unique way. First, you install the case while your rough construction is being done. After that, when you are settled in your venue, you choose which screen fabric you need or require. An added benefit to this system is that should you ever need to change screen surfaces, you do not have to disassemble the entire system to do it.  

The screen is enhanced by its handsome white powder coated closure doors and case which provide a clean look and allow easy installation of ceiling tiles. The motor is quiet which is a plus in areas such as school rooms, corporate venues, hospitals and other areas where you prefer a minimum of noise.

Ceiling Mountable    Non-Tensioned    153" Diagonal    Square (Audio-Visual) Format    1:1 Aspect Ratio    Front Projection    120VAC, 60Hz    Matte White Finish

Patented in-the-roller motor mounting system for quiet operation

As screen formats change with technology, fabric replacement is simple and comparatively inexpensive

UL Plenum Rated case

Matte White fabric up to and including 10' high will be seamless; Glass Beaded fabric up to and including 8' high will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric up to and including 8' high will be seamless; High Power fabric up to and including 6' high will be seamless

Related Questions and Answers

Q: 1. How do you keep the modeling lamp on. As soon as I take a photo, the modeling lamp goes off. I'm using the Elinchrom EL19366 Skyport Transmitter?

A: Hi,If you check your instruction book you will see how to control the modeling lamp.Here is the item you are inquiring about.Setup Visual-Flash-Control (VFC) modeProportional modelling lamp setup (PMS) Enter VFC setup :1. Press Prop push button for more than 2 seconds, until the display shows F.X (X is 0 or 1) toenter into the Modelling lamp setup menu.2. Use the Flash-Power up and down button to change setting:- F.0: Visual-Flash-Control = OFF. Modelling lamp remains ON after flash.- F.1: Visual-Flash-Control = ON. Modelling lamp switches off during recharging.3. The display switches back to normal mode after approx. 4 seconds if no button is pressed. Thesettings are automatically stored.4. Standard setting is F.0, VFC = OFFI hope this helps.Regards,Will H

Q: 2. What is the color temperature for this unit? Is it the same as the dlite 200ws? And does the temperature change with increase in flash power?

A: According to Elinchrom, all of the current D-Lite RX monolights have a flash tube balance for 5500 Kelvin when the units are set to full power. Unfortunately, there is no information regarding what the color temperature would be at lower power settings.

Q: 3. What is the part # for the reflector that will fit the D-Lite 400W/s RX 4? I see that it does not come with one.

A: ELR6 is the umbrella reflector https://bhpho.to/2K0SfIe.

Q: 4. How powerful is this Flash Head compared to a conventional portable flash. I.e. Canon 400EX ii or the 600EX RT? It's not clear to me what that 100W means. Thanks.

A: We experience it has about twice the power of a normal on camera speedlite. We use it for on location attached to a rechargeable battery. It is great to have low weight, but able to use light modifiers used in studio photography. The skyport, the computer or iPhone remote capability is great and modern. Most users respond to have other Elinchrom units, so an addition is a simply decision to make

Q: 5. I love using this lighting set. Question: When I use three elinchrom flashheads, they sound not together really quickly. Is there anything I need to check? Is there a manual download for the trigger plus? I found a two page manual on the elinchrom website.

A: What sound? Fan, beep? If they are at different power levels they may sound different.

Q: 6. Can you use a canon st e3 rt trigger to fire the strobes? Also is this alot more powerful than a 600 rt?

A: Most speed-lights are no more than 65 watts. The D-Lite RX One is 100 watts. It is around double the power. It does not work with the Canon ST-E3-RT Speedlite Transmitter. The built in receiver works with the Elinchrom - EL-Skyport Transmitter Plus and the Elinchrom EL-Skyport Transmitter Pro.

Q: 7. Is the honeycomb grid and hood diffuser included in this set? If not, do you have anything that will work with this set?

A: A softbox is included for each head in this kit. However, there are no grids available to fit them. For grids to fit the lamp heads using a reflector, you may consider the Elinchrom Reflector and Honeycomb Grid Set, B&H # ELCGS8.25 . https://bhpho.to/36ARezX

Q: 8. Is this compatible with a Sekonic Litemaster Pro L-478DR using its own Pocketwizard transmitter? If not, can Pocketwizard receivers be connected to them to work?

A: If you are referring to the Sekonic LiteMaster Pro L-478DR-U-EL Series Light Meter for Elinchrom EL Skyport System, B&H # SEL478DRELU, then it would be fully compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit as packaged. If you instead own the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System, B&H # SEL478DRU, it would not be directly compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit. However, you may use the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System with the light kit by connecting the included Elinchrom EL-Skyport Transmitter Plus (B&H # ELSTP) to the synchro terminal on the bottom of the light meter with the Metz 36-50 Standard Sync Cord, B&H # ME5548. When you press the MEASURE button on the meter, it will trigger the transmitter connected via the cable and trigger your lights.If If you are using PocketWizard remotes with the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System and the light kit, the light meter will communicate directly with the PocketWizard remotes. However, you will have to connect the PocketWizard remotes to the Elinchrom monolight strobes via the 1/8 (3.5mm) sync terminal on the rear of the monolights via the PC sync cables included with the PocketWizard remotes. The PocketWizard remotes are not directly compatible with the Elinchrom Skyport receivers built into the light fixture, so they have to be connected via the sync cable. If you do not have a sync cable, the PocketWizard PC1N Locking PC Sync Cable (1'), B&H # WIPC1NPC, would work for your usage needs.

Q: 9. Do you know the size an weight of the whole packaging set box?

A: Box Dimensions (LxWxH)15.0 x 8.5 x 7.0 weight 3.5 pounds.

Q: 10. Will D-Lite RX 4/4 work with Nikon D7500 and Sony A7?

A: Only with the dedicated Transmitters for each particular brand