Countryman E6 Directional Earset Mic, Highest Gain, With Detachable 1mm Cable And Ta4f Connector For Electro-voice Wireless Transmitters (beige)
- Product Code: ga226303
-
The beige E6 Directional Earset Mic, Highest Gain, with Detachable 1mm Cable and TA4F Connector for Electro-Voice Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.
The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.
In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a TA4F connector for direct connection to an Electro-Voice 2000 Series or 2500 Series wireless bodypack transmitter.
For Vocals and General Speaking Detachable 1mm Cable TA4F (EV), See Description 30 Hz to 15 kHz Frequency Response Includes Cardioid & Hypercardioid Caps Headroom for Strong Vocals Windscreen Cable Clips Carrying Case
Key Specs | |
---|---|
Compatible Transmitters | Electro-Voice: MB2500, MSB |
Polar Pattern | Cardioid / Hypercardioid |
Frequency Response | 30 Hz to 15 kHz |
Maximum SPL | 125 dB |
Sensitivity | W5/5/High Gain for General Speaking (H6, E6, EM6, EM2) |
Analog Output | 1x TA4F/Mini-XLR 4-Pin Female |
Environmental Resistance | Water-Resistant with Included Housing (Unrated) |
Microphone | |
Compatible Transmitters | Electro-Voice: MB2500, MSB |
Polar Pattern | Cardioid / Hypercardioid |
Included Tone/Pattern Caps | Hypercardioid, Cardioid |
Performance | |
Frequency Response | 30 Hz to 15 kHz |
Maximum SPL | 125 dB |
Sensitivity | 6.0 mV/Pa |
Sensitivity | W5/5/High Gain for General Speaking (H6, E6, EM6, EM2) |
Equivalent Noise Level | 24 dB (A-Weighted) |
Connectivity | |
Analog Output | 1x TA4F/Mini-XLR 4-Pin Female |
Cable Length | 5' / 152.4 cm |
Cable Diameter | 0.039" / 1 mm |
Power | |
Power Sources | Plug-In Power |
Operating Voltage | 1 to 2 V |
Physical | |
Color | Beige |
Environmental Resistance | Water-Resistant with Included Housing (Unrated) |
Weight | 0.07 oz / 2 g |
Packaging Info | |
Package Weight | 0.5 lb |
Box Dimensions (LxWxH) | 10 x 10 x 2" |
The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.
The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.
The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.
The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.
Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.
An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.
For general speaking.
Related Questions and Answers
Q: 1. Will this also charge my cell phone and Nexus tablet?
A: If your devices have the ability to charge via USB inputs such as on a computer or in a wall via an adapter then this charger would be able to accomodate those. It has a USB-in for charging USB devices.
Q: 2. Will this work in New Zealand, for minolta 5D camera ?
A: Yes, the Watson Compact AC/DC Charger for LP-E6, LP-E6N & LP-E6NH Battery can run on 100-240V; you would need a plug adapter to fit the outlet.
Q: 3. How long does it take to charge LP-E6 battery?
A: It depends on the how depleted the battery is but the Pawa Compact Charger for Canon LP-E6, LP-E6N, and LP-E6NH Type Batteries can take about 2.5 hours to charge a battery.
Q: 4. Is this the piece for the fx3 tilta cage?
A: No, this is designed for the Sony a7/a9, Canon 5D, and Panasonic S1 cages.
Q: 5. Will this work with the BMPCC6K Pro Cage?
A: No, the proper device to use would be this model: https://bhpho.to/3foPFeb
Q: 6. I'm searching a camera battery charger that can be charged through an USB port. Other than standard 100/240-12v input, i would like to able to charge with an external battery pack.?
A: Not sure if this would be practical, but you can search thisSUNKEE LM2577 DC-DC Adjustable Step-up Power Converter Module
Q: 7. My Canon R5 displays the overheating alert after 1.5 hours of still shooting (not video) with this power supply. Anybody else having overheating issues?
A: Be sure your firmware is up to date, this should help significantly. Some have found that having the camera on for this long consistently shooting, especially in sunny and hot conditions, as well as going a significant amount of continuous shooting at 20fps can lead to overheating. However, the firmware does help a lot to rectify this issue.
Q: 8. One reviewer states ...does not indicate charging status... . Does the unit have an LED to indicate when charging is complete?
A: Yes, there is an LED that changes color when the battery is fully charged. When the battery is charging however, the LED does not tell you exactly how charged the battery is.
Q: 9. Does this work with the Canon R7?
A: Yes, the Canon AC-E6N AC Adapter and DC Coupler DR-E6 Kit is compatible with the Canon R7.
Q: 10. Will they work with a canon 80D?
A: Yes it will.
Top Bestselling Products
Da-lite 92603ls Advantage Electrol Motorized Projection Screen (60 X 60")
$8,013.60 $11,058.77
Prox X-rcf-hdl30a Lax2w Flight-road Case For Rcf Hdl 30-a Line Array Modules
$1,649.97 $2,441.96
Products You May Like
Pro-ject Audio Systems Debut Carbon Evo Manual Three-speed Turntable (gloss Red)
$1,797.00 $2,587.68
Proaim Docking & Balance Bracket For Stabilizers & Accessories
$303.00 $402.99
Sealife Sl974 Mini Ii 0.65x Wide Angle Lens
$149.67 $211.03
Atlona 2-year Extended Warranty For At-ome-ex-tx-wp
$275.94 $355.96
Boris Fx Optics (1-year Subscription, Download)
$297.00 $386.10
Belkin Boostcharge 60w Usb-c Cable (3.3', Black)
$26.97 $33.71
Best Rite Interactive Projection Board (5 X 10', Low-gloss White)
$2,740.50 $3,891.51
Lockncharge Epic 36-device Pre-wired Usb-c Charging Cart
$8,085.00 $11,965.80
Overland 4tb Tandberg Rdx Removable Disk Media
$1,527.00 $2,382.12