24 Rode Ixy Stereo Microphone

Soundcraft Gb2 - Live Sound / Recording Console

Product Code: ga226518
Availability: In Stock

$7,467.00 $10,379.13

Qty

0 reviews Write a review

Description
Reviews (0)

The Soundcraft GB2 live console series is designed to deliver the audio fidelity and mixing capabilities necessary in front-of-house (FOH) or monitor mixing applications in large or small venues. The GB2 is available in 16, 24, 32 channel frames to suite specific needs in live sound mixing.

This model is configured with 24 input channels. 24 inputs feature microphone and line level connections, an additional 2 stereo inputs are also provided. The stereo inputs (STE1 - STE2) provide L/R stereo line level inputs and 3-pin XLR microphone inputs for stereo microphone placement when capturing vocals, instruments, ambiance, etc.

The console features 2 stereo paired group outputs enabling routing to monitors, external recorders, etc. The GB2 series implements Soundcraft's GB30 microphone preamp and EQ, delivering the sonic quality expected of more costly consoles. Additional features include Soundcraft's famed matrix mixer for added routing flexibility and an integrated meter bridge, enabling accurate metering.

Parameters
Total # Of Inputs	24 Total
Mic/Line Inputs	24 Line: 1/4" TRS Phone 24 Microphone: 3-pin XLR
Stereo Line Inputs	2 Stereo: L/R Paired 1/4" Phone Line & 3-pin XLR Microphone
In-Line Inputs/Returns	No
AUX Sends	4 Aux Sends
AUX Returns	4 Stereo Returns
Inserts	1/4" TRS Phone - Mono Inputs, Main Output and Subgroup Outputs
BUS (Group) Outputs	2 Subgroups: Balanced 3-pin XLR
2 Trk Master I/O	Mix L/R: Stereo Paired 3-pin XLR Balanced and 1/4" Phone
ALT I/O	ALT Stereo: L/R Stereo Paired 1/4" Output
Monitor Outputs	Monitor: L/R Stereo Paired 1/4" TRS Phone
EQ Section	High Filter: 13kHz, +/- 15dB, 2nd order shelving Hi-Mid: 550Hz - 13khz, +/- 15dB, Q=1.5 Lo-Mid: 80Hz - 1.9kHz, +/- 15dB, Q=1.5 Low Filter: 80Hz, +/- 15dB, 2nd order shelving
Solo/Mute	All Input Channels
Channel Level Control	100mm Faders
Trim/Gain Control	Rotary Potentiometers
Phantom Power	+48V Phantom individually switched
Metering	12-segment LED bar graphs
Frequency Response	20Hz to 20kHz <1dB
Dynamic Range	Not Specified by Manufacturer
Signal-to-Noise Ratio	Measured RMS, 22Hz to 22kHz Bandwidth -128dBu Mic E.I.N. @ unity gain, 150 ohms source impedance
Total Harmonic Distortion (THD)	<0.006%Mic sens. -30dBu, +20dBu at all outputs @ 1kHz
Power Supply	Internal AC PSU - 85V, 270V AC, 50/60Hz universal input Power Consumption Less than 150W

The GB2 series is available in a variety of frame configurations. This model features 24 mono and 2 stereo inputs

The GB2 series feature 2 group outputs for routing to external recorders, monitors, etc.

The matrix output mixer provides added routing flexibility.

4 auxiliary sends provide plenty of routing to external effects, monitors, etc.

All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.

Related Questions and Answers

Q: 1. is BeFree live video head ? will fit on oben Bc-226t

A: Yes, the 3/8"-16 thread on the Manfrotto Befree Live Video Head is compatible with the 3/8"-16 screw on the Oben AT-3585 Folding Aluminum Travel Tripod when removing the Oben BC-226T Ball Head from the tripod.

Q: 2. I know the plates are much longer, but can I take a camera off my Manfrotto MVH500AH head with 500PLONG plate and mount on this head?

A: Yes you can

Q: 3. Will this work on a Sirui P204S?

A: Yes it will. The Sirui P-204S (B&H #SISUP204S) has a 3/8 screw that you can use to attach the Befree Live Video Head to it.

Q: 4. does this come with the leveler that you attach between the head and the extension rod?

A: The Pan Bar on the Befree Live Video Head is removable and there is a Bubble Level on the bottom of the head to assist you with balancing the head. However there is no leveling mechanism on the head. You could put this product on top of a Manfrotto 438 Compact Leveling Head before connecting it to a tripod for a ball base leveling system. You could also pair the Befree Live Video Head with the 755XB MDeVe Tripod which has an integrated Half-Ball Leveling System included already.

Q: 5. Will this work on a bogen 3011 tripod leg

A: yes it does - 3/8"-16 Female threads

Q: 6. I have a Davis And Sanford FM 18 and a stedicam that use the same style sliding plate and botheare interchangeable I want to use this head but want to know if the plate is the same demensions as the FM18?

A: The Befree Live Video Head uses the Manfrotto 501PL plate, which is not compatible with the Davis & Sanford FM18. One popular option is to install Manfrotto 577 Rapid Connect adapters on to heads that do not accept a 501PL, B&H # MA577.https://bhpho.to/2mRIakh

Q: 7. Is this standalone head come with the half ball base or it is flat base only? The half ball base only comes with the Befree live tripod system?

A: The leveling base is part of the tripod, not the head. So you would need to purchase the Befree Live tripod. The head has a flat base.

Q: 8. I know this is primarily for video but is it stable enough for long-exposure and time-lapse video and photography?

A: Yes it is.

Q: 9. Will either Manfrotto's 200 PL or 200LT PL work on this head? I really want something smaller on my Lumix GH5. Thanks in advance!

A: They will not, this head uses the 501PL system. Instead you can look at the Manfrotto MHXPRO which is a Pan and Tilt head that uses a 200PL-14 Quick Release plate. https://bhpho.to/2badq6r

Q: 10. Is this video head made for the Manfrotto MVM250A Monopod?

A: You can use this head on that monpod without issue for they have matching 3/8 mounting points.

There are no reviews for this product.