The three key way head fitting of the OConnor C1221-0002 Cine HD Baby Tripod makes for quicker mounting of Mitchell mount tripod heads, while still maintaining the solid support O'Connor is known for. The single-stage design and die-cast spider ensure maximum rigidity for head and camera loads up to 309 lb, and the rotary locking clamps provide tool-free temperature-independent leg adjustment.

The legs feature a 4 to 34.6" height range, so you can get your camera close to the ground for low angle shots. The aluminum alloy legs provide a balance between weight and strength that allows the legs to handle the rigors of the production day, and the dual spiked feet provide grip on soft exterior surfaces.

3 Key Mitchell Mount    Supports Up to 309 Pounds    4 to 34.6" Height Range    Aluminum Alloy Construction    Dual Spiked Feet

Three key way slots in the head fitting allow you to quickly align your tripod head on the legs

Single stage design for maximum rigidity

Short leg tube "baby" version for extra low angles

Die-cast alloy spider/receiver top stage

Rotary stage clamps are temperature-independent

Dual leg spikes for high and low angles

Related Questions and Answers

Q: 1. Will this tripod support a DSLR camera, Canon 80D to be exact?

A: This tripod can support a DSLR like the Canon 80D with a lens attached, not more than 11 lbs.

Q: 2. Hi, I take interest for this tripod but I need to ask some questions please. 1) I need to use the tripod in short time and I'm noticing it has the knobs. I think you will need more time to turn those knobs than the keys with the spring snap to stretch its stems. 2) I need to put the same plate on the gimbal, do you know if it is possibile to buy thta plate separately? I thank you a lot for your info.

A: Yes, the arca plate is a standard plate that is sold separately. We have a Canon SL2, Canon 70D, 5D Mark II and an XF100 all with arca plates on them for use with this stand.We use the Peak Design Slide straps for all three DSLR's and the mount comes with the strap as well.https://a href= http://www.bhphotovideo.com/c/product/1141808-REG/peak_design_sl_t_2_slide_tallac_navy_strap_caramel_leather.html target= _blank www.bhphotovideo.com/c/product/1141808-REG/peak_design_sl_t_2_slide_tallac_navy_strap_caramel_leather.html/aAs far as speed, it depends on your dexterity, and if you want to move real fast, just use one leg as a mono pod. We use this both in studio for a B Camera mount for the XF100 and as our field mount. It is much better build the any of the tab type tripods we have. It is a little heavier, but very easily field usable, and once you get good with the twist-drop-twist, I think you fill find this to be a great tripod for the money given the quality.

Q: 3. Is this the same tripod as the Vanguard Alta Pro 263 AT, just with the added ball head?

A: The Vanguard Alta Pro 263AB 100 and Alta Pro 263 AT are not the same tripod. The 263AB is taller.

Q: 4. Is it change to Sunwayfoto DDC-60i Screw-Knob Clamp (60mm) ?

A: It is our opinion that changing the Vanguard top plate is probably not possible.

Q: 5. Does this tripod convert to a monopod?

A: You can take out the middle post and use it as a really small monopod.

Q: 6. Its mentioned for mirror less cameras? Can i use it for my canon 700d

A: Absolutely, I use it with my Nikon d750 and a 3.5lb Lens with no stability issues

Q: 7. Can the leg lock in a partially extended state or must it be fully extended to lock?

A: Hi yes I am almost positive it can lock partially extended. I have only used it fully extended and in locked position. Hands down a well built Monopod! - Drew

Q: 8. Can you shoot down for flat lay photography or do you need an arm?

A: The tripod does not have a column that goes horizontal. The center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. If the object is large you will need to use a tripod arm. This is a link for some of them, https://bhpho.to/3nabqRy

Q: 9. can I change the ballhead and if yes how ?

A: Yes, you can change the ball head on the Vanguard Alta Pro 263AB 100 Tripod. You simply unscrew the head from the legs.

Q: 10. Where is this product manufactured?

A: The country of origin for this tripod is MYANMAR (BURMA)