The Hardwired 2-Button Remote Control for Perfect Cue from DSAN is designed for use with Perfect Cue and Perfect Cue MINI. The PC-AS2-HW remote control is powered through the Perfect Cue and features two commands: forward and reverse. The remote control connects via a CAT-5 cable or by XLR with an adapter cable. It can also be used as an accessory cue light, as the LEDs will light when the cue light is activated via a transmitter.

Forward and reverse buttons

Red & green LEDs confirm button press

Forward button has a distinctive tactile surface

Related Questions and Answers

Q: 1. Could I charge this on a Sony Dual V-Mount charger?

A: Yes, you will be able to charge this on a Sony Dual V-Mount Charger.

Q: 2. Can this battery power the RED Epic-W without Harm?

A: The main issue of compatibility of the use of non-OEM batteries centers around information passed back and forth between the camera and battery regarding power level. We therefore feel no harm to either device will occur. However, battery power levels are unlikely to be indicated in camera. Since we do not sell RED products, we advise that you proceed at your own risk.

Q: 3. Why is this battery so much cheaper that the IDX DUO 150? It looks extremely similar minus the extra d-tap and USB out. Is that all?

A: The DUO supports a higher draw, 14A vs 10A. Also has a 5 bar fuel gauge instead of 4, and the leds blink when they're getting low, so you get a more accurate idea of what's left.

Q: 4. Is this battery compatible with the Red Scarlet W?

A: The challenge for 3rd party battery makers is being able to communicate with the RED battery percentage meter. IDX does not list this battery as being able to.

Q: 5. Are these airline safe?

A: It is not so much are they safe as are they allowed on the plane in either checked or carry on. The TSA allows 100Wh (or less) batteries in checked and carry on. These batteries, however, are 146Wh and while the TSA will allow them in carry on and checked, the airline also has to approve. See here for more information. http://bit.ly/1P3hLaX

Q: 6. power unit for the I cue by Roscoe?

A: The correct power supply for this unit is the Rosco PSU50 Power Supply - 50 Watts (100, 120, 240V AC), B&H # ROPSU50. Please see the following image below for reference.

Q: 7. Can this battery compatible with black magic design Ursa camera-dr asok

A: If the URSA camera has a V mount battery plate, yes, this battery and any other V mount battery will work.

Q: 8. I just bought these but the handles do not attach to the monitor mounts - the screw just spins inside the rosette. Am i missing something?

A: If you are using a compatible display from TV-Logic it would need a cage like this model. PRL Director's Cage for TVLogic F-7H and F-7H Mark II BH #PRLMC7TVLGC https://bhpho.to/3CNsnvh

Q: 9. The screws from the handles to the the cage brackets are too small - unsure how this would work without a screw adapter?

A: The PRL Perfect Grip Handles with ARRI-Style Rosettes (Set of 2) (B&H# PRLMCHANDLES) features ARRI-style rosettes, the screws in the center of such rosettes being too small for 1/4"-20 female threads. (That's because 6mm is just a bit smaller than 1/4".) However, they handles may be used with the included rosette mount adapters. Those adapters will fit into many cages, such as the PRL Director's Cage for TVLogic F-5A and VFM-055A (B&H# PRLMC5TVLGC) with its 1/4"-20 threads and anti-twist pin receivers.

Q: 10. part number?

A: This is the AC adapter you need for the I-CUE Intelligent Mirror.Rosco PSU50 Power Supply - 50 WattsB&H # ROPSU50 MFR # 205714020050