Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. Can ATEM EXTREME SDI ISO record to CloudStore Mini?

A: The Blackmagic Design ATEM SDI Extreme ISO Switcher could record to the Blackmagic Design 16TB Cloud Store Mini (4 x 4TB), B&H #BLCSM16TB, as long as you are using the switcher with a computer that has network access to the Cloud Store Mini. It wouldn't be possible to connect the Blackmagic Design ATEM SDI Extreme ISO Switcher directly to the Cloud Store Mini.

Q: 2. What version of WD Red drives are included? Are they the WD Red Pro 8TB 3.5-Inch SATA III 7200rpm 128MB Cache NAS Internal Hard Drive?

A: WD does not specify the exact drives it uses in this NAS.

Q: 3. What is the read/write speed of the device?

A: The Blackmagic Design 8TB Cloud Store Mini (4 x 2TB) BH #BLCSM8TB has 1GbE and 10GbE, over 10GbE you can get up to 1GB/s. Over 1GbE, 100MB/s and Over USB C, 5Gbps (540MB/s).

Q: 4. Can this be mounted to several computers?

A: Yes, the Blackmagic Design 8TB Cloud Store Mini (4 x 2TB), B&H # BLCSM8TB can be accessed from multiple computers at the same time.

Q: 5. Can the PR4100 be ordered with added memory?

A: No, but I ordered extra memory to add into the PR4100 when I ordered the unit.

Q: 6. Does this allow for hot swaps?

A: The WD My Cloud Pro Series 56TB PR4100 4-Bay NAS Server (4 x 14TB) BH #WEBNFA0560KB does not have the ability to hotswap drives.

Q: 7. Can this be setup to access via FTP protocol?

A: The Blackmagic Design 8TB Cloud Store Mini does not host an FTP server internally.

Q: 8. Does it work if I just plug in two WD Red disks leaving the other two slots empty? I was planning to plug in just two 10GB (each) disks leaving the other two ports empty to fill with new disks some day in the future... Thanks!

A: Yes you can occupy just two of the four bays. You may have limited options when upgrading to 4 drives later.

Q: 9. hi manish here can i upgrade the RAM from 4GB to 8GB in WD my cloud PR4100?

A: Yes, the unit is showing the following memory specs: Total Installed Memory: 4 GB DDR3L Total Memory Slots: 2 x SO-DIMM Maximum Memory Capacity: 16 GB

Q: 10. Can someone post a picture of the back of this unit? Six pictures of only the front are not that useful. Thanks!

A: I will notify the web team to add the back of the NAS server; here is a link to a picture from the manufacturer of the back of the system: https://shop.westerndigital.com/content/dam/store/en-us/assets/products/desktop/my-cloud-pro-series-pr2100/gallery/my-cloud-pro-series-pr2100-Rear.png.wdthumb.1280.1280.webp