Originally designed to connect Tascam DA88 digital audio tape recorders to the various mixing consoles available, the Pro Co Sound D-Sub DB25 to D-Sub DB25 Analog MultiTrack Cable pinouts are also compatible with Mackie, Otari, Radar, and Pro Tools DB25 in/out protocols.

Connect Tascam DA88 to Digital Consoles    Compatible with Mackie and Otari DB25    Compatible with Radar and Pro Tools DB25

Amphenol DB25 (D-Sub) connectors on all multitrack products

There are two different thread standards for D-Sub connectors, Metric and English. Pro Co supplies both sets of screws for your convenience.

Individually shielded and jacketed pairs are clearly numbered for easy identification.

Related Questions and Answers

Q: 1. Does this mean I get timecode in the stream plus 3 input channels and the stereo mix?

A: Yes it does. You can record on all 3 tracks and the stereo mix and embed time code on the 3 tracks plus the stereo mix.

Q: 2. Do you know if this will work with Fujifilm?(100s) I believe this is the same connection 2.5mm sub mini

A: Although the X100S does have a sub-mini remote connection, this Alzo remot has not been tested with it. The results may vary when using them together.

Q: 3. how long is the cord between the camera and the remote?

A: It is approximately two feet long.

Q: 4. Can it be used for online chat e.g. Skype or Discord?

A: Yes, you can. Just use the usb-c port to connect with your computer.

Q: 5. So, it only has 1 XLR input? Does it supply phantom power?

A: Hi John, The MixPre-3 II has 3 XLR inputs along with a stereo 3.5mm input as well. The XLR inputs can all supply phantom power, and the 3.5mm input has PIP (plug-in-power) available for 1 mic.

Q: 6. Do you know if this will work on Fujifilm 100s, since it uses the same connection?

A: It is possible it will work,he ALZO Flip Flash Bracket Shutter Release for Canon 2.5mm Sub-Mini Cameras on the FUJIFILM GFX 100S. The FUJIFILM GFX 100S does have a 2.5mm shutter port. But it has not been tested with that specific camera.

Q: 7. I am trying to decide btw Mixpre 3 and Mixpre 6, and leaning toward the MixPre 6 due to greater number of XLRs. But I notice one curious difference: the operating temperature max is listed at 140 degrees for the 3, but under 90 degrees for the 6. What accounts for this large difference? I'm not planning to work in the Sahara, but a standard summer day can easily reach 90 degrees so am concerned. Any advice on this? Have other customers run into heat problems with either the 3 or the 6?

A: We are correcting this error on our website. Thank you fo bringing this to our attention. Both items have the same environmental specifications: MixPre-6: Operating Temperature -4 to140°F / -20 to 60°C Storage Temperature -40 to 185°F / -40 to 85°C MixPre-3 II: Operating Temperature -4 to 140°F / -20 to 60°C Storage Temperature -40 to 185°F / -40 to 85°C For details related to construction and design: Sound Design: support@sounddevices.com +1 608.524.0625 main 800.505.0625 toll free

Q: 8. Am I correct in thinking that there is no balanced output? That seems like a foolish oversight.

A: The Sound Devices MixPre-3 II 3-Channel / 5-Track Multitrack 32-Bit Field Recorder (BH # SOMIXPRE3II) offers the following I/O: Analog I/O: 3x XLR 3-Pin Female Balanced Line/Mic Input 1x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input 1x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output 1x 1/8" / 3.5 mm TRS Female Unbalanced Line Output Digital I/O: 1x 1/8" / 3.5 mm SMPTE Timecode Input 1x 1/8" / 3.5 mm SMPTE Timecode Output 1x Micro-HDMI SMPTE Timecode Input

Q: 9. Does it come with the MX-LMount battery sled?

A: The MX-LMount battery sled must be purchased separately. The MX-4AA battery sled is included with the Sound Devices MixPre3 II.

Q: 10. How can I sync timecode from tentacle sync into mix pre ii ?

A: The MixPre II can either be a "master" and send/jam timecode to the Tentacle Sync ("slave"), or the Tentacle Sync can act as "master" and jam the MixPre II ("slave"). If you are using the MixPre II as a master, simply set the MixPre II TC Mode to Free Run. If you are using the Tentacle Sync as the master, please set the MixPre II TC Mode to AUX IN 1 or AUX IN 2. Please refer to the Tentacle Sync manual to determine how to set this device to send and/or receive timecode, depending on your preference of using it as a "master" or "slave."