The GangWay16 from JL Cooper is a compact, easy-to-use, one-port RS-422 gang roll switcher and GPI trigger box. It allows you to control up to 16 decks or video servers from a single 9-pin controller. The front panel includes a lighted button for clear indication as to the status of each machine, a gang roll button to quickly enable all machines, 3 user preset groups, and a tally select button.

The 22 illuminated push button switches show configuration and the port routing. A front mounted RS-422 port provides a convenient connection for a jog/shuttle remote or other device. The unit has 16 RS-422 ports on the rear panel and a rear mounted RS- 422 control input. The rear panel also includes two 25-pin D-Sub connectors for GPI I/O, a power switch and an additional interface slot.

The interface slot can accept an optional interface card which can act as a master Input, connecting the GangWay16 to either 10/100 Ethernet, USB, RS-232 or RS-422. This can be used to remotely change the switching configuration of the GangWay16 itself, or as the source of commands for controlling connected VTRs, DDRs or servers.

16 Port    22 Illuminated Push Button Switches    2 x 25-pin D-Sub Connectors for GPI I/O

16-port "gang roll" router for RS-422 decks

Allows you to control up to 16 decks or video servers from one 9-pin controller

22 illuminated pushbutton switches to configure and show the port routing.

Connections include two 9-pin D-Sub connectors for controllers (one on the rear panel, one on the front panel) and sixteen 9-pin D-Sub connectors for devices such as VTR decks, video servers and switchers

You can communicate with GangWay16 over LAN or over the internet, for remote control and switching functionality - ideal for remote truck or studio applications

A new feature allows the ES-SloMo - Universal Instant Replay Controller to directly interface with GangWay16 to provide for control up to 16 RS-422 machines or server channels, using the GangWay16 as the machine interface

Related Questions and Answers

Q: 1. Can i use this trigger on my d750 ?

A: Yes, you'll need to use the Vello 2.5mm Remote Shutter Release Cable for Nikon DC-2 Cameras (B&H # VERCCN225 / MFR # RCC-N2-2.5)

Q: 2. I originally bought this for my Sony A7R IV. I have since switched to Canon R5. Can I use this on my Canon?

A: Yes, the Miops Camera Trigger will work with the Canon EOS R5. You just need the correct shutter cord. The Canon EOS R5 uses the canon three pin. This will work, Vello 2.5mm Remote Shutter Release Cable II for Canon 3-Pin Cameras BH #VERCC2C225 • MFR #RCC2-C2-25 https://bhpho.to/3yrnfHq

Q: 3. Is it compatable with a Canon 7d?

A: Yes, with the 3 pin connection cable.

Q: 4. HI suport ATEM Television Studio HD ?

A: Yes it does, this panel supports the ATEM Television Studio HD. https://bhpho.to/2n3FwHr

Q: 5. MIOPS es compatible con X1D de Hasselblad? Que conexin o cable debo usar?? Gracias.

A: No es compatible con este modelo. No trabajara.

Q: 6. Does this work with Olympus EM1 Mark 2?

A: If you purchase the Vello 2.5mm Remote Shutter Release Cable for Select Olympus Cameras, B&H # VERCCO125, then yes, you may use the Pluto Trigger on the Olympus OM-D E-M1 Mark II Mirrorless Micro Four Thirds Digital Camera.

Q: 7. Can I use Atem switcher software at the same time?

A: Yes you can. The Ion can be used as a companion to the ATEM Software or you can use it as a stand alone panel for an ATEM Switcher.

Q: 8. what cable do I need to connect to sony a6700 via usbc port?

A: The Pluto Trigger is not compatible with the A6700. The USB-C port on the Sony a6700 is not compatible with remotes.

Q: 9. I have atem m / e 1, and I use the DVE transition I do not see it on the panel but it can be used somehow?

A: Yes, DVE transition is supported. Push the DIP and WIPE buttons in simultaneously.

Q: 10. Will this connect to a Nikon D7500

A: Yes, it will work with the D7500, click the link below for the appropriate match; https://www.bhphotovideo.com/c/product/1337056-REG/pluto_trigger_with_shutter_release.html