Ez Digital Antenna Channels

Rdl Ez-mx4ml - Microphone And Stereo Line Audio Mixer

Product Code: ga227207
Availability: In Stock

$689.97 $986.66

Qty

0 reviews Write a review

Description
Reviews (0)

Taking up 1/3 of rackmount space, the RDL EZ-MX4ML is a relatively compact four-channel mixer for microphones and line-level sources. It's a suitable solution for anyone who needs to mix the audio output of mic and line sources together into a single input. For example, if you have an MP3 player, a laptop, and two microphones, the EZ-MX4ML will allow you to connect them all to a single input on a speaker/amplifier, such as a PA system.

Channels 1 and 2 are balanced XLR inputs for microphones, giving you 24V of phantom power for condenser microphones. Channels 3 and 4 have two gold-plated stereo RCA inputs for line-level signals, though channel 4 also features a stereo 3.5mm mini-plug input. Each of the 4 channels has a dedicated level control knob on the front panel.

The output of the EZ-MX4ML features two gold-plated stereo RCA line-level jacks. The power plug on the rear panel locks into place to avoid unwanted disconnections (the EZ-MX4ML operates on standard AC power). It can be rack-mounted, secured onto a surface, or free standing. Dual-segment LED meters visually warn you if a signal is clipping.

XLR, RCA & Stereo Mini-Plug Inputs 2 Mic Inputs with Phantom Power 2 x RCA Inputs / 1 x Stereo 3.5mm Input Mix 2 Mic & 2 Line Stereo Sources 2-Segment LED VU Meters on Stereo Output Gold-Plated RCA Input & Output Jacks

Parameters
Input Connections	2 x Balanced XLR microphone inputs 4 x Unbalanced RCA inputs (2 stereo pairs) 1 x Unbalanced 3.5 mm stereo input, phone type
Output Connectors	2 x Unbalanced RCA outputs (stereo pair)
Max Input/Output Gain	Mic Inputs: -11 dBu max Line Inputs: -10 dBV nominal on RCA jacks or Mini jack, +20 dBV max Output: -10 dBV nominal, +16 dBV max
Impedance	Mic Inputs: 1.2 kOhms Line Inputs: > 10 kOhms
Frequency Response	80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter) 10 Hz to 20 kHz (±0.01 dB, line input)
THD & Noise	< 0.1% (20 Hz to 20 kHz, -50 dBu mic input) < 0.05% (20 Hz to 20 kHz, line input)
Crosstalk	< -72 dB (1 kHz)
CMRR	> -55 dB (20 to 20 kHz, mic input)
Meter	Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
Phantom Power	24 V (IEC 61938:2013)
Noise	< -65 dB (below -10 dBV output, -50 dBu mic input) < -75 dB (below -10 dBV output, line input)
Mounting Size	1 RU, 1/3 rack width
AC Power Requirements	24 VDC power supply current
Current Draw	50 mA (idle), 80 mA (maximum), 100 mA (maximum with phantom)
Dimensions	5.8 x 3.0" / 14.6 x 7.6 cm
Weight	0.6 lb / 0.3 kg
Packaging Info
Package Weight	0.965 lb
Box Dimensions (LxWxH)	10.25 x 7.4 x 2.5"

2 balanced microphone inputs on XLR

1 unbalanced stereo line-level input on RCA jacks (stereo pair)

1 unbalanced line-level input on either stereo mini-plug or RCA jacks (stereo pair)

Unbalanced output on RCA jacks

Microphone inputs provide phantom voltage

Stereo LED VU meters for the left and right output channels

Designed for dynamic or condenser microphones

Headroom accommodates high-input levels

Gold-plated RCA input and output jacks

Related Questions and Answers

Q: 1. powervision powereye is listing as compatible any ideas how it works ? if its worth it.

A: The camera on the Power Vision PowerEye Quadcopter B&H # POPEY101 comes with an MFT mount lens included. It is an MFT mount camera which is compatible with this Olympus MFT mount lens.

Q: 2. can you put a lens hood on this lens?

A: No you cannot! Also the 37mm filter thread is too close too the inside to attach any type of hood with blocking part of the wide angle view.

Q: 3. Is it compatible with the DJI Inspire 2 with ZENMUSE X5S. Do I need a special mount?

A: They are compatible. Both the lens and the X5S are micro 4/3 mounts. Here is a list of comparable lenses.DJI MFT 15mm/1.7 ASPH (With Balancing Ring and Lens Hood)Panasonic Lumix 15mm/1.7 (With Balancing Ring and Lens Hood)Panasonic Lumix 14-42mm/3.5-5.6 HDOlympus M.Zuiko 12mm/2.0 (With Balancing Ring)Olympus M.Zuiko 17mm/1.8 (With Balancing Ring)Olympus M.Zuiko 25mm/1.8Olympus M.Zuiko 45mm/1.8Olympus M.Zuiko 9-18mm/4.0-5.6

Q: 4. Is this lens compatible with Panasonic GX8?

A: Yes, this lens is compatible with the Panasonic GX8 camera.

Q: 5. Will it work with the Lumix GH3?

A: The Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6 EZ Lens is compatible with the Panasonic GX8 camera.

Q: 6. Will this device take a 16:9 signal and de-squeeze it to 4:3?

A: No! This device only convert frame rate signal.

Q: 7. What is the maximum length of this lens when it is fully extended? The specs only give the length for when it is collapsed.

A: 1 15/16

Q: 8. Can you lock the rotator so it wont rotate?

A: You would need to purchase an anti-twist plate accessory.

Q: 9. does the camera have warranty by manufacturer?

A: Yes the camera comes with a 1 year warranty from the manufacturer.