The Da-Lite 52 x 122" Da-Snap Projection Screen is a fixed frame screen that is suitable for business or personal use. Using the snaps or optional touch fastener tabs, you can easily and readily change the screen surface to accommodate your need. 

The screen finish is mounted to a rugged frame that features a black masking border. The border provides a finishing touch to the screen and helps keep your audience focused on the screen.

For the business person on a budget or with a smaller seminar room, the Da-Snap is the perfect solution. When a motorized installation is not feasible or desired, the Da-Snap fits the bill. Easy to use, economical and flexible, this affordable and functional screen provides a solution by offering you a simple audio-visual projection set up.

Wall Mounted    Fixed Frame    Tensioned    133" Diagonal    Cinemascope Format    1:2.35 Aspect Ratio    DA-Tex Finish    Rear Projection

Provides a perfectly flat viewing surface for video projection applications

Frame available with Pro-Trim finish for an additional charge - Pro-Trim is a fabric frame covering that aesthetically enhances the appearance of the installation while absorbing light that surrounds the viewing area

Da-Mat, High Contrast Da-Mat, Da-Tex (Rear), Pearlescent, Cinema Vision, High Contrast Cinema Vision and Dual Vision fabrics up to and including 16' high will be seamless; Audio Vision, High Contrast Audio Vision and High Contrast Cinema Perf fabrics up to and including 8' high will be seamless; High Power fabric up to and including 6' high will be seamless

Related Questions and Answers

Q: 1. Can the optic slave function be turned on and off? I want to use this light kit in a place where we will have 3 portrait stations in an open area near by and don't want other portrait stations setting off this set.

A: The optical slave in this monolight can be switched off.

Q: 2. Hi, is this item has a Shown reflector?

A: Although the reflector is not included, you can purchase the Elinchrom Wide Angle, Umbrella Reflector, 6-1/3", 95 Degrees, for Elinchrom Flash Heads, B&H # ELR6 to work with this light. https://bhpho.to/2JWyZvd

Q: 3. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 4. How do you keep the modeling lamp on. As soon as I take a photo, the modeling lamp goes off. I'm using the Elinchrom EL19366 Skyport Transmitter?

A: Hi,If you check your instruction book you will see how to control the modeling lamp.Here is the item you are inquiring about.Setup Visual-Flash-Control (VFC) modeProportional modelling lamp setup (PMS) Enter VFC setup :1. Press Prop push button for more than 2 seconds, until the display shows F.X (X is 0 or 1) toenter into the Modelling lamp setup menu.2. Use the Flash-Power up and down button to change setting:- F.0: Visual-Flash-Control = OFF. Modelling lamp remains ON after flash.- F.1: Visual-Flash-Control = ON. Modelling lamp switches off during recharging.3. The display switches back to normal mode after approx. 4 seconds if no button is pressed. Thesettings are automatically stored.4. Standard setting is F.0, VFC = OFFI hope this helps.Regards,Will H

Q: 5. Does this have the standard Elinchrome mount-will fit any Elinchrome speedrings, reflectors, etc?

A: Yes standard Elinchrome EL mount

Q: 6. What is the part # for the reflector that will fit the D-Lite 400W/s RX 4? I see that it does not come with one.

A: ELR6 is the umbrella reflector https://bhpho.to/2K0SfIe.

Q: 7. The nomenclature is confusing. Is this the lens that comes in the kit?

A: Yes, its the same lens that comes in the camera kits.

Q: 8. Can the power output be controlled remotely? I want to mount this about ten feet high so I don't want to have to lower it to adjust the output.

A: Yes, the power can be controlled by the Skyport Transmitter.

Q: 9. What does plm mean?

A: Some lenses include SDM (supersonic direct-drive motor), DC (direct current motor) and PLM (pulse motor) in their lens names. These lenses perform the AF operation using the motor drive in the lens barrel. This enables a quieter and smoother AF operation than body AF operation driven by the focusing mechanism motor inside the camera body, and enables an easy, comfortable focusing operation. The SDM supersonic motor includes a brake mechanism for allowing high-accuracy speed control and position control. Lenses that employ a drive mechanism which directly links the PLM and lead screw are not only silent, but offer high-speed, high-precision AF operation.

Q: 10. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.