This Impact Sync Cord Male Mini (3.5mm) to Male PC is a straight cable, 1' long. It can connect a standard camera PC terminal to a 1/8" (3.5mm) mini female terminal (used by many remote control devices).

Straight Cable

Related Questions and Answers

Q: 1. DOSE the Nikon MC-DC2 remote release cord with Nikon D70 & D300 CAMERA ?

A: No. The MC-30/MC-30a works with the D300 and D300s. For the D70, the only remote is the infra red remote ML-L3 which only works in front of the camera (180 degree - side to side). I have found a reference to a MC-DC1 for he D70S but do not know if this will fit the D70 itself.

Q: 2. I need to attach a stereo microphone to the multi function sony rx100 ii m2 shoe. will this connector xfer the stereo from mic?

A: No, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is not use for a mic and is not a stereo connection.

Q: 3. will this work with a sony a6000 to plug a microphone into it?

A: No. We highly suggest the following item Revo Hot Shoe to 1/4"-20 Male Post Adapter BH #RESACS14M • MFR #SA-CS-14M https://bhpho.to/3sl559F

Q: 4. Will this work with Olympus om1

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is indeed compatible with the Olympus OM-1.

Q: 5. Will this work with a Profoto a10 flash? I would like to use it on a hasselblad 503cw. Thanks

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection will allow the Profoto A10 AirTTL-N Studio Light to sync at the center contact of the hot shoe and trigger in manual mode. The Hasselblad 503cw camera series do not have a port or a hot shoe to connect this adapter. Instead, you will need a lens with the sync port and a PC male to PC male sync cord.

Q: 6. Where is Nikon MC-DC2 manufactured?

A: The following unit is made in china.

Q: 7. I am going to use this hot shoe adapter to connect the Samsung NX10 and Godox AD100 Pro with a PC Sync cable. Will it work?

A: While it is possible to use the Vello HSA-PVU Hot Shoe Adapter with Safe Voltage Conversion with a Samsung NX10 and Godox AD100 Pro for connection with a sync cable, it has not been tested to our knowledge. Your results may vary.

Q: 8. does this work with the new D750 camera?

A: Yes, I bought it with my D750 and it works perfectly.

Q: 9. Do you have to hold it for long exposure?

A: No - I set my camera for example at 30 seconds, then I clic on the remote and let it work without holding it.

Q: 10. I have a Z6 II and D500. Does this offer any advantage over using the Snapbridge app to trigger remote shutter?

A: A wired remote would have a more reliable connection to the camera and a faster response time.