The Dalite 78 x 139" Ascender Electrol Motorized Front Projection Screen is an interesting and functional option for venues where a ceiling mounted screen is not viable.

This unique screen can be recessed into the floor and with the flip of a switch rise to comfortable viewing height. If you prefer not to recess the screen into the floor, the Ascender can be mounted within an attractive case. The concealed approach to this screen makes it appealing to people who are limited by space and need a screen which can be hidden when not required. 

220 Volts, 50Hz    Floor Mounted    Tensioned    159" Diagonal    HDTV Format    16:9 Aspect Ratio    Matte White Finish

Allows screen to be recessed into the floor for a concealed appearance or installed into a decorative surrounding

Motorized spring-assisted scissor mechanism raises the screen surface from the housing to ensure smooth operation

A trap door housing keeps the screen and lift mechanism hidden until the screen is activated

UL listed

Related Questions and Answers

Q: 1. could I trigger D-Lite with flash slave trigger or as slave ? and what the x-sync speed when as slave ? thanks

A: You can set up the strobes as slaves individually or together with a sinc cable, remote or on camera flash. I believe the x sinc should be based on the flash sinc on your camera. The elinchrom web site has manuals on the d-lite 4 strobe. The optional hs trigger works great . You can control each and all strobes and use high shutter speeds.

Q: 2. Has anybody seen a lit of the various flash durations for these? I know they report 1/800th at full power, but what are the flash durations at, say, 1/2, or 1/16th? I can't find anything like this listed anywhere. I'm considering the new HS transmitter, and these durations are going to be important.

A: Hi,There is no published flash duration data for lower settings. Generally, theFastest flash duration is always at full flash power for our units, and it gets slower when you decrease flash power.The reason is that by reducing the flash power you also decrease the capacitor voltage and lower voltage will give a longer, slower flash duration. This rule does not apply for ELC units as they are using a different technology.A global rule at minimum power the flash duration will be around 40% slower.I hope this helps.Regards,Will HBrand Manager Lighting, MAC Group US

Q: 3. Hi, is this item has a Shown reflector?

A: Although the reflector is not included, you can purchase the Elinchrom Wide Angle, Umbrella Reflector, 6-1/3", 95 Degrees, for Elinchrom Flash Heads, B&H # ELR6 to work with this light. https://bhpho.to/2JWyZvd

Q: 4. Does it work in a contry use 220V, 60Hz voltage power?

A: The input voltage that the Elinchrom D-Lite RX One Flash Head, B&H # ELDLRXONE, is designed to accept is 90 to 260 VAC, 50/60 Hz. It is a multi-voltage item, so it would work for your usage needs. However, do note that the flash head includes the standard USA plug and the modeling lamp designed for use on 100-120V input voltage. As such, if you will be using the light fixture internationally, you will need to purchase a plug adapter to convert the plug to the type used in your country, and you will have to purchase a modeling lamp with the correct voltage for use in your country.

Q: 5. Is the honeycomb grid and hood diffuser included in this set? If not, do you have anything that will work with this set?

A: A softbox is included for each head in this kit. However, there are no grids available to fit them. For grids to fit the lamp heads using a reflector, you may consider the Elinchrom Reflector and Honeycomb Grid Set, B&H # ELCGS8.25 . https://bhpho.to/36ARezX

Q: 6. Hi , can i use it with Leica q ?

A: While you can use this kit with the Leica Q, it has not been tested to our knowledge. Your results may vary.

Q: 7. Does this work with the hot shoe on Fujifilm X-T2?

A: The El-skyports are pretty universal. I've used them with my 5D and my Panasonic G7 without problem.

Q: 8. I had previously ordered this and it came with an EL-Skyport Speed Transmitter. Does it still include this remote trigger?

A: Unfortunately, a transmitter is not included with the Elinchrom D-Lite RX One Flash Head. A compatible option is the Elinchrom EL-Skyport Transmitter Plus, BH # ELSTP. https://bhpho.to/3c95qbf

Q: 9. Can this be used as a slave? I would be firing an alien bee.

A: Yes; this head has an optical slave.

Q: 10. does this work with the Vello Captain Freewave?

A: The internal receiver does not work with the Vello FreeWave Captain. If you use a receiver on the light then you will be able to use the Vello FreeWave Captain.