The Audix MicroPod Gooseneck Microphone incorporates the Micro Series microphones and combines them with a gooseneck mount and mounting flange for a complete podium microphone solution. The MicroPod gooseneck microphones are more than suitable for use in lecture halls, houses-of-worship, court rooms, board rooms, assembly halls, etc.

The M1250B microphone feature's a built-in condenser capsule and output stage, eliminating the need for bulky external preamplifiers and powering devices. The condenser element features high sensitivity and a wide frequency response of 80Hz to 20kHz. The cardioid polar pattern effectively minimizes noise and off-axis audio signal that can cause residual noise and feed-back.

The included MGN18 18" gooseneck houses the capsule and provides flexible, quiet microphone positioning. The XLR male output stage base is convenient for quick installation into a standard mixer or preamplifier input. A flange mount is also provided for surface installation on tables and podiums.

Measures 18" (45.72cm)    M1250B Condenser Microphone    Gooseneck and Flange Mount    Cardioid Polar Pattern

The included 18" gooseneck mount houses the Micro Series microphone capsule and provides flexible positioning in lecture halls, houses-of-worship, board rooms, etc.

The Micro Series microphones feature a miniature capsule and output stage built-in to the body of the microphone. This eliminates the need for external power modules and output stages

The M1250B Micro Series capsule features a small profile and measures 1" length. The cardioid polar pattern effectively minimizes off-axis noise and audio signal, significantly reducing feedback.

An included flange mount enables surface mounting on podiums, pulpits, desk tops, etc.

Related Questions and Answers

Q: 1. I have this item, but I am looking to purchase the 2 pieces from the picture that are greyed out. I think one is the ultraPlate for the Blackmagic Camera but where can I find the smaller piece that fits into it?

A: The only item I was able to find that included both the ultraPlate and the cold shoe to cage top connector was this item:Redrock Micro ultraCage Black BMCC Deluxe Cage Upgrade Kit - B&H # RE81310015 - MFR # 8-131-0015I was unable to find the cold show to cage connector separately, even on Redrock Micro's web site.I am glad I got this unit though, as the handle is definitely a great item to have on the cage for lugging around a fully loaded camera kit.

Q: 2. How do I connect it to Jobu Design Table Top Pod as both have male threads supposedly of different diameters? Tx.

A: I have found a similar article fron novoflex:https://a href= http://www.bhphotovideo.com/c/product/241070-REG/Novoflex_VB_SCHRAUBE_Connecting_Screw_1_4_Male.html target= _blank www.bhphotovideo.com/c/product/241070-REG/Novoflex_VB_SCHRAUBE_Connecting_Screw_1_4_Male.html/a

Q: 3. can you dim the light manually?

A: Yes. The following unit can be driven manually and via mobile app.

Q: 4. Where can I purchase the parts that goes in to the ultraPlate and connects to the cage? Do I actually need them with the cage? Thank you!

A: Hello again Jingtong,you need the blackmagic top plate accessory for ultraCage. I don't see it on the BH website, please write to us at sales@redrockmicro.com and we can assist you with thatthank you again!

Q: 5. Will this work with the small rig 220b?

A: Yes, the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) will provide the SmallRig RC 220B about 2.5 hours of runtime.

Q: 6. Does the Ultracage Black for DSLR support the top handle for other Ultracage Black rigs like the C100 mark ii?

A: Hi Brian. I'm not sure i completely understand your question but let me take a stab.Can you attach an ultraCage top handle to the ultraCage for DSLR? YES just pick up the optional handlecan you attach a c100 top handle to the ultracage for DSLR? YES. you just need to get the cold shoe adapter. Are top handles supported on ultraCage DSLR the same way as other ultraCages? YES!hope that helps

Q: 7. Can I use two IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) with the Aputure 2 bay power station for Amaran 150c?

A: Yes, the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) would work with the Aputure 2-Bay Battery Power Station (V-Mount).

Q: 8. Will this cage work with the Panasonic GH5?

A: Hi Jennifer - thanks for asking. This ultraCage is better suited for larger DSLR cameras. You might check out the Scout HX rig we offer at BH as well - really nice multi-function system including powered wired and wireless remotehttps://a href= http://www.bhphotovideo.com/c/product/1176777-REG/redrock_micro_8_165_0001_ultracage_scout_hx_hybrid.html target= _blank www.bhphotovideo.com/c/product/1176777-REG/redrock_micro_8_165_0001_ultracage_scout_hx_hybrid.html/a

Q: 9. will it work with Seetec 4K monitor?

A: Yes, the IndiPRO Tools 2 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual V-Mount Battery Charger Kit will power the Seetec 4K monitor as well as other monitors that take a V-Mount battery.

Q: 10. Will this battery fit on a Lupo Actionpanel Dual Color Panel yoke without interfering with panel movement?

A: Yes, any micro V-mount or gold-mount battery will fit underneath the Lupo Actionpanel Dual Color Panel without interfering the yoke.