The TM Mini Tripod Stand from Triad-Orbit is designed to accommodate applications that call for low mic placements such as on drums, guitar amps, and more. Each leg of the stand's base has four ratcheted positions that provide up to 65° range of movement. This allows the TM to stand on uneven surfaces and allows for stacking, which makes storage easier. The TM is also equipped with an IO quick-change coupling system to mate with IO-equipped hardware. This is great for quickly changing microphones and booms without having to unscrew anything.

Short For Low Mic Placement    Can Be Used On Drums, Amps & More    Ratcheting Allows For Angled Positioning    IO Quick-Change Coupler    Clutches Adjust & Secure Shafts & Bases

Related Questions and Answers

Q: 1. What is the load capacity of the Orbit boom?

A: Dear Chris,Thank you for your inquiry. Our Orbit booms are rated to hold up to 4lbs (2kgs) on each arm, with the boom arm fully extended and parallel with the ground, before it may start to lower. However, depending on how far you extend the extension tube and the angle that you position the arms, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 2. How much it weight? Consider that fit in a boom with mic.

A: The Triad-Orbit IO-RA is made of aluminum, which is much lighter than steel. It weighs 4 ounces (0.25 lb) / 113.4 grams (0.1 kg).

Q: 3. What is the length of the T3 Tall Tripod when collapsed for travel and transport?

A: Thank you for your inquiry. The T3 stand can collapse down to 31 inches for transport. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 4. Does this ballast bag come empty? I'd like to be able to travel with it empty.

A: The bags are shipped full.

Q: 5. what is the load capacity?

A: Not rated for weight. Designed for microphone for use. It is very rugged and robustly built. it should be able to handle any microphone.

Q: 6. Would this work with something that has a Baby (5/8") stud receiver such as the Manfrotto 099B?

A: This stud is only for the Triad Orbit system.

Q: 7. Can the ballast bag be emptied for travel, or would you recommend against it?

A: According to Triad-Orbit, you could theoretically unzip the bags and empty them, but the zipper is slightly hidden. The steel shot is in a secondary, thinner zippered pouch inside the main bag. The only downside would be filing it wherever you're traveling to. For example, using dry sand would have less than half the weight of the ballast material that the bag currently has inside.

Q: 8. Will this support a 10 pound monitor?

A: Yes. It is rated for a load of up to 30 lbs.

Q: 9. I already own some expensive heavy duty Atlas mic stands. I would like to consider the Triad Orbit quick change adapter as a means to quickly detach my boom from the stand itself. My booms have two pound counter weights and I generally use these stands for some very heavy and expensive condenser Mics. Does this adapter hold firmly and securely with no worry of vibration due to a loose or even slightly wobbly connection ? Because these 7/8 diameter mic stand setups weigh over twenty pounds total, I would like to be able to achieve rapid setup and takedown that they may also serve as stage performance stands. I realize that my question is lengthy. But, I think that the information given should be considered when looking to purchase a 40$ adapter. Thank you.

A: Hey Raymond,Thanks for your inquiry. The Triad-Orbit IO-R Quick-Change Coupler was designed and purpose-built for professional support applications. IO-R will provide solid, vibration-free coupling for your Atlas large format stands (MS20, MS25, MS43, SB36) and PB booms. Please refer to the PROfile videos on the Triad-Orbit website to see the IO-R in action at some of the world's finest recording facilities (a href= http://www.triad-orbit.com/profile target= _blank http://www.triad-orbit.com/profile/a).The IO-R ships with an IO-H1 hex mounting head. The hex shaft of the IO-H1 is made of brass. For heavy-duty and inverted support applications, we recommend the use of the IO-H2 hex mounting head. The IO-H2 features a stainless steel hex shaft and a SafetyStop notch to prevent accidental uncoupling. Incorporating the IO-H2 head with IO-R coupler will allow you to safely support, secure, suspend and position heavy studio mic like AEA & vintage RCA.Compare the performance of the Triad-Orbit IO-R/IO-H2 combo to any competitive quick-change couplers for your demanding application. Also, our new IO-RA lightweight aluminum body quick-change coupler is also available at only $20.00. Thanks for your interest in Triad-Orbit Advanced Stand Systems.

Q: 10. What is the load capacity of the T2 tripod?

A: Dear Chris,Thank you for your inquiry. Our Triad stands are rated to hold up to 35lbs (16kgs) before the top tube may start to lower. However, depending on how much you tighten the top clutch, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a