The Low-Voltage Distribution Board from FSR is a remote power solution for the FSR IT-USB-CHRG, SS-USB-CHRG and IPS-D717S DC powered USB chargers. It consists of a rack-mounted board to remotely power up to six DC powered USB chargers and a power supply with an AC power cord. The unit provides a means of neatly distributing USB power from an included singlepower supply, eliminating the need for multiple AC wall adapters and messy overloaded power strips.

Two mounting holes are provided to attach to the

rear rack rails in a rack

All connections are via captive-screw terminals

On-board LED power indicator

Related Questions and Answers

Q: 1. What is the screw size and thread gauge of the screws that come with this?

A: We connected with Alan Gordon about the screws included with the Alan Gordon Enterprises Hi-Hat and Low-Hat Mounting Board (Pre-Drilled with Screws). Moreover, please note that only Alan Gordon Hi-Hats are compatible with the board. The screws and nuts included are: Cap screw is 3/8 16 by 1 1/4" Hex nut 3/8 16 nut Washers 3/8

Q: 2. does this come with a second passive speaker with it? or is it just the sel powered master speaker?

A: This is sold as a single, active self-amplified speaker. A passive companion speaker is available as a separate purchase: OWI Inc. 4Ω 6.5" Passive Surface Mount Cabinet Speaker (White) B&H # OWP602W

Q: 3. Is this USB 3.1 Gen 2 or Gen 1?

A: USB-C 3.1, gen 1

Q: 4. Why not charge battery/power the camera directly into the USB-C port on the camera? What am I missing here?

A: The Leica SL3 Mirrorless Camera cannot be powered from the USB-C port. You need the Leica DC-SCL6 USB-C DC-Coupler to power the camera with a USB battery pack or AC power with an adapter.

Q: 5. Can this cable be used with a Logitech MeetUP 2 conference camera?

A: The FSR USB-C 3.2 Gen 2 Digital Ribbon Cable (32.8'), B&H # FSDRC3110M is compatible with the Logitech MeetUp 2.

Q: 6. Are there standard 5.25 inch drive bays that I could install in my PC case that will read these SSD Mini's? If there was a SATA connection drive bay that I could install to read these SSD Mini's it would make my life a lot easier than having to sit the docking station on top of my chassis all the time.

A: Don't buy... They burn out. I had the same experience with 2 units. The third party options have been pretty reliable.

Q: 7. Is it faster than usb3.0?

A: The 3.1 is about 10% (NOT 10X) faster on sequential reads and sequential writes (the most meaningful measure if you're using best practices -- a freshly formatted disk to write then later read video files). For random reads/writes using high queue with high thread count, the numerical differences were meaningful (but may not show in practice for video work) and for random reads/writes using low queue and low thread count, a marginal difference is seen. Details follow. I ran CrystalDiskMark 7.0 using the same SSD (a Samsung EVO 850 480GB) with each dock (the ATOMDCK003 --USB A 3.0 and ATOMDCK004 --USB C 3.1) plugged directly into my HP Spectre laptop native ports. I used default settings, which produce 8 results (2 sequential read, 2 random read, 2 sequential write and 2 random write results, average of 5 tests for each result and using 1 GiB file size). The 3.1 was slightly faster on sequential reads and sequential writes -- 464 (8 queues, 1 thread) and 443 MB/s (1 queue, 1 thread) compared to 426 and 422 MB/s read speeds, and 465 (8 queues, 1 thread) and 438 MB/s (1 queues, 1 thread) compared to 431 and 429 MB/s write speeds. For random reads/writes using high queue with high thread count, -- 127 MB/s read vs. 24 MB/s -- call that a factor of 5, and 90 vs. 40 MB/s write speeds -- a bit more than a factor of 2 (32 queues, 16 threads for those numbers). For random reads and writes with 1 queue and 1 thread, the numbers were only marginally better for the 3.1 compared to the 3.0 (24 vs 22 read and 33 vs 27 write).

Q: 8. Will this be compatible with the original Leica SL typ 601?

A: Yes, Leica DC-SCL6 USB-C DC-Coupler is compatible with Leica SL (Typ 601) Mirrorless Digital Camera.

Q: 9. Can use this with a Dtap port from a camera battery using a Dtap to 4pin hirose adapter?

A: It should work with your camera if you have a cable like the CAMVATE D-Tap to 4-Pin Hirose Cable (B&H # CAC2379).

Q: 10. Good morning! Are the SL2 batteries compatible with the SL3???

A: Yes, the Leica BP-SCL4 Lithium-Ion Battery Pack (8.4V, 1860mAh) is compatible with the Leica SL3 Mirrorless Camera.