The 6' C-MDMA/MGMA 15-pin HD to DVI & 3.5mm Stereo Audio Cable from Kramer is designed to connect laptop computers to video conference systems that have a DVI input. It adapts the analog pins of DVI-A to 15-pin HD connector and includes an unbalanced audio cable with 3.5mm mini jacks at each end. Also bundled is a short cable that adapts a 3.5mm mini jack to RCA connectors.

6' Cable Length    1 x DVI Connector    1 x 15-pin HD Connector    Molded Connectors at Both Ends    Included 3.5mm Audio Mini Jacks

Rugged cable with molded connectors

Use this adapter when you need access to the analog signal present at a DVI-I source, or when you need to connect analog RGBHV to a display that provides only a DVI-I input
Note, this adapter does not convert analog to digital or digital to analog. Always verify compatibility details for the source/destination in your application

6 ft (1.8m) cable length

Related Questions and Answers

Q: 1. Can I use this cable with a RODE 3.5mm TRS Female to XLR Male Adapter to send audio from a Zoom F4(sub out) to a camera's XLR?

A: The Mogami Gold 3.5mm TRS Male to 3.5mm TRS Male Stereo Audio Cable (15') could be used to connect a line output to a mic input, but you will need to switch your camera's input to line level or attenuate the input gain to avoid overloading the preamp.

Q: 2. with this cable can I connect my XLR dynamic mic(Behringer Ultravoice Xm8500) to DSLR camera?

A: Yes, this cable will work for your dynamic mic into the 3.5mm mic input of a dslr camera.

Q: 3. I plan to use this for a mid-side array - assuming this is wired like the Rycote Conbox? I’ll be running a 5 pin XLR from the male to the mixer. Thanks.

A: This is the recommended cable for the Rycote Conn Box: BH #RYCB3HWMSXLR https://www.bhphotovideo.com/c/product/861410-REG/Rycote_016924_ConnBox_Microphone_Cable.html

Q: 4. Is there a way to rack mount this unit?

A: YES, kramer sell a rack solution for this model, be aware that this solution is hard to find, i tried and never found a seller whit the product in stock.

Q: 5. Picture shows a female HDMI and male DVI-D connector - opposite of the description?

A: Male DVI - D connector to female HDMI that is what I got and what description says.

Q: 6. Can this cable handle 4k at 150 ft?

A: unforunately no, 3G SDI cables support up to 1080p at 60fps. You will need a 6G SDI cable.

Q: 7. I want to use old apple cinema 20 monitor as a preview monitor for Roland V-1HD Portable 4 x HDMI Input Switchercan I use this adapter, will it work with Roland preview hdmi out to apple cinema dvi cable?Thanks

A: My uses one for her Dell laptop to my Old Cinema Display 20 it works pretty well.

Q: 8. Does this cable work with the Arri Amira?

A: Yes it will work.

Q: 9. Can the Kramer VS-4X be used for one input with output to one of four selected outputs? (Signal in opposite direction from the labeled inputs and outputs.)

A: The VS−4X is a high−performance switcher for balanced stereo audio signals on XLR connectors. It switches any one of four stereo signals to a single stereo output.

Q: 10. can i select more than one knob in the same time? (4example: switch between 5.1 and stereo signal)

A: From my experience you can not select but one input at a time. The product is outstanding, though. I am in to very high end audio and have high end audio components connected like Mark Levinson, Theta, Magnum Dynalab and notice no signal degrade.