Rosco Fluorescent Lighting Sleeves/Tube Guards are a very reliable and cost-effective system for easy control of tough lighting scenarios- especially under fluorescents. In addition to the financial benefits of the sleeves, they protect against the potential disaster of glass shattering by containing the lamp within the end caps.

Rosco sleeves are constructed of a solid polycarbonate tube within which is held the specific filter. The choice of filters and combination of filters is endless - there are complete Roscolux, Cinegel or E-Colour color filter lines - something for every venue, every photographer, every cinematographer.

For T5 Lamps    Over 300 Colors Available    UL94HB Rated Polycarbonate    End Caps Protect From Shattered Glass    Easily Trimmed with Scissors

Available in sizes for T12, T8 and T5 fluorescent lamps

The T8 and T5 sizes contain a UV filter that minimizes fading

All standard sizes (2, 4, 5, and 8') are easily trimmed to accommodate any size lamp

Related Questions and Answers

Q: 1. Will a dslr and a lens fit in this bag?

A: The Long Weekend Santa Fe Shoulder Bag (Creme Multi) is only 2.5" deep, so it would not hold a DSLR and lens.

Q: 2. Can this clamp be mounted on a Giottos MH5400 ball head?

A: Hi Dana, That's a hard one to answer because you need to know how the current clamp is mounted to the Giottos ball head. Some manufacturers use the same mounting scheme so you can swap them out, others have a unique mounting. the only way to know is to take off the existing clamp. Check out how the Wimberley clamp mounts to the ball head by going to the C12 clamp page on the BH site and click on the second picture. The first thing I would do before buying a clamp is to remove the existing one to see how it mounts. This will help you because now you can take a picture of the Giottos mount and if you call B&H at least you'd be able to send the picture to them so they could help you make sure you're buying the right part. I'm hopeful this might save you the time and hassle and expense of going back and forth if this one proves to not fit the mount on your ball head. P.S. The manufacturers mount the clamps using Locktite, they are mounted on real good and it takes the exact right tool and some muscle to get the original clamps to break free. Make sure you have the right tools so you don't compromise your existing ball head.

Q: 3. WILL THIS FIT THE G2 TAMRON 150-600 MM LENS?

A: The Tamron G2 150-600mm does not need a plate since it already has a built in Arca Swiss style foot.

Q: 4. Will this work on a Canon RF 100-400mm lens?

A: No, the Canon RF 100-400mm f/5.6-8 IS USM Lens does not work with the Oben QR-53 Long Lens Quick Release Plate (5.3"). That lens does not support a tripod plate or lens tripod collar.

Q: 5. What's the center column diameter?

A: Benro TMA48CXL Extra Long Series 4 Mach3 Carbon Fiber Tripod has a center column with a diameter of 36mm.

Q: 6. Will these work with my Nikon D60?

A: Yes, this extenstion tube set is compatible with the Nikon D60 camera.

Q: 7. Are the two lower sections of one leg supposed to rotate freely? I can't tighten the lower section unless I first tighten the middle twist lock because the lower section will just rotate freely. This is on the leg with the logo.

A: All the sections on one leg can lock together.

Q: 8. will this work on a sigma 150-600 lens?

A: Yes, the Oben QR-53 Long Lens Quick Release Plate (5.3") will work with the Sigma 150-600mm f/5-6.3 DG OS HSM lens.

Q: 9. What are the minimum and maximum distances between the two screws?

A: The minimum distance between the screws on the Oben QR-53 Long Lens Quick Release Plate (5.3") is approximately 1.75”. And the maximum is around 4”.

Q: 10. Will this plate fit a Nikon AF-S Nikkor 500mm f/5.6E PF ED VR lens?

A: Yes, the Oben QR 53 will fit the AF-S 500mm f/5.6E PF ED VR lens. Based on the lens' mounting screw positions, you might have to have both screws sit within the same sliding groove in order for them to fit best.