The DaLite Fast-Fold Velour Drapery Kit for Deluxe Frames is a great way to add a touch of professionalism to your presentation. The drapery system provides a neat and "finished" look to the screen. It is a 16 oz, fire retardant cotton velour drapery that attaches with snaps to Fast-Fold screens to enhance the image and assure that your audience's attention remains fixed where it should be.

Fire Retardant    With Adjustable Skirt Bar    Without Poly Case    Black

Fully pleated for finished professional look

Standard colors available include black, blue and pewter gray

Complete kit contains a valance bar, 14" valance drape, wing bars, 30" wide wing drapes and a 45" long skirt

Related Questions and Answers

Q: 1. The load capacity for this tripod is 19.8lbs. Is this still true if the center column is fully extended in the 90 degree horizontal position?

A: I had exactly the same question so I asked Manfrotto directly, here is there response...Don, thank you for your enquiry. The MT055XPRO3 tripod max load is 9 kg in its upright position. There is an assumption that when the centre column is repositioned horizontally, the column is usually centered across the tripod. This does not change the max load. if you are extending the column as far as possible to one end, it is suggested to reduce the max load to 2-3 kg. This calculation includes the weight of the head and camera equipment together. Please keep in mind the centre of gravity has shifted off significantly, therefore it will be necessary to add counterbalance. The 405 geared head can be attached to the MT055XPRO3 tripod centre column,. the top of the column has a 3/8 fixing thread which is compatible with the threaded bottom of the head. If you have any further questions or concerns, please let me know. Regards, Marc HELPDESK

Q: 2. Charger

A: The Nikon P950 does come with a charger and one can be sold separately Nikon EH-73P Charging AC Adapter BH #NIEH73P • MFR #25912 https://bhpho.to/40EHM9w

Q: 3. What is the quality of indoor photos? Subject using stage lighting or exhibit lighting?

A: The Nikon COOLPIX P950 Digital Camera is unsuitable for low-light photography. The lens's small aperture does not let in much light, and the camera also has a small sensor, so when using high ISOs, the image will have noise. The Panasonic Lumix DC-FZ1000 II Digital Camera, BH #PADCFZ1000M2, is a better option. The zoom range is shorter, but the lens has a larger aperture that lets in more light. The camera has a larger sensor, so you can raise the ISO.

Q: 4. Can I use the view finder in video mode?

A: Yes, the viewfinder works in video mode.

Q: 5. How do you configure this tripod for 3.5 setup?

A: Hi Peter,I'll try to explain the way that I have done this. For this configuration, I use the X PROball head because it allows for the easiest adjustments. First, hold the tripod as if you have just removed it from the box with the head pointed in the upward position. At the top of each leg, located just below the silver head mounting plate, you will see a rectangular silver lever approximately 2 1/4 inches long. This lever is the leg lock release. At the bottom of this lever, you will see an inverted triangle (with the point facing down). While holding the tripod by the other two legs, place your thumb on the triangle , of the leg you are working on, and apply downward pressure. You should feel the lock release. While maintaining this pressure, rotate the leg upward until it is in a horizontal position. This is the maximum the tripod will allow the leg to move. Release the pressure from your thumb and the leg will lock in place horizontally. Repeat this process for the other two legs. Now all three legs should be horizontal and the central shaft should still be vertical. Next, locate the wing-nut by the red emblem just below the silver head mounting plate. Unlock this wing-nut by turning it open. Invert the tripod so that the head mounting plate is seated in your left hand. At the bottom of the central shaft , you will see a large red triangular shaped button. Press this button and maintain pressure as you slowly push the central shaft upward. Continue pushing until you hear the lock engage . Invert the tripod right-side up. Then rotate the head mounting plate to the left of the wing-nut and the central shaft will now lay on top of the opposing leg. Next, turn the wing-nut to the locked position. Attach the X PROball Head and rotate the camera mounting plate to the upward position. Attach camera and you are ready to take low level pictures. Reverse each step of this process to return the tripod to its original position. Hope this helps.

Q: 6. Does this camera have the exact same sensor as the P1000?

A: Yes it does.

Q: 7. What is the Black Plastic Removable Clip for? Instructions say it is for tightening the locks, but I don't see how? They did include what looks like a small metal torx wrench which I think performs that function?

A: The plastic clip has a raised round section that works like a socket. You put that on the back side of the flip lock to tighten or loosen it.

Q: 8. Is it threaded for a tripod ?

A: The Nikon P950 does have a 1/4" tripod thread at the bottom.

Q: 9. Can I change the feet? I want to use spikes or claws.

A: MA204SPK3 - these are the feet

Q: 10. how much does the 055XPROB weigh? how much does the 055CXPRO3 weigh?

A: The specs on this website says 5.5 lbs for the 055CXPR03