You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Remote Audio Unbalanced Adapter Cable 3.5mm Ra To Ta5f For Stereo Outputs Into Lectrosonics Transmitters (18")

Remote Audio Unbalanced Adapter Cable 3.5mm Ra To Ta5f For Stereo Outputs Into Lectrosonics Transmitters (18")
  • Product Code: ga22983
  • Availability: In Stock

$120.00 $172.80

The Unbalanced Adapter Cable from Remote Audio features a 3.5mm right angle TRS on one end and a to TA5F connector on the other, which has the stereo output summed to mono. It can be used to feed audio from stereo headphones, tape, or auxiliary outputs to a single Lectrosonics transmitter. The cable is built with professional-quality Neutrik, Mogami, and Remote Audio brand components. Furthermore, it features a flexible braided sleeving for added durability.

For Lectrosonics Transmitters    18" Length    Neutrik and Remote Audio Connectors    Mogami Cable    Durable Flexible Braided Sleeving

Parameters
Connector 11/8" (3.5 mm) right angle TRS mini-jack
Connector 2TA5F
Length18" (46 cm)
WeightNot specified by manufacturer
Packaging Info
Package Weight0.1 lb
Box Dimensions (LxWxH)7.5 x 2.7 x 1.5"

Related Questions and Answers

Q: 1. When line-in is plugged into Sony FX30 (1/8" plug), volume control has no bearing. Does this cable help in any way?

A: No. The Remote Audio Unbalanced Adapter Cable 3.5mm RA TS Jack to 3-Pin XLR Male with 40 dB Pad (18") would typically not be used for connection to a camera's 3.5mm mic input since it has a male XLR connector, not a female XLR connector. A cable with a female XLR connector would be used when going out of an XLR output. This cable would be used to connect from a 3.5mm TRS line output to an XLR mic input.

Q: 2. Will this cable work between the Mozegear D-Mini Papi Red Version and the RED DSMC2 I/O V Lock Expander?

A: You would need to check your components for these connections:Connector 11/8 (3.5 mm) right angle TRS mini-jackConnector 2TA5FIf you are looking to connect a microphone , then this might work, depending upon the pin configuration of your microphone.

Q: 3. Is this cable ideal for connecting a mirrorless camera such as a GH4 -- with its dedicated mic input -- to a recorder such as the Tascam DR-60dmkII -- with its dedicated camera outputs -- or will any standard 3.5mm stereo mini cable do? I want to achieve the cleanest possible signal between camera and recorder. Any advice or recommendation is appreciated.

A: The Tascam DR-60dmkII features a dedicated camera mic level output. Any standard 3.5mm cable will suffice to get clean audio from the recorder to the camera.

Q: 4. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: The Remote Audio Unbalanced Adapter Cable 3-Pin XLR Female to 3.5mm RA TS Mini-Jack (18"), BH # RECAX3F18M, will work with the Tentacle Sync TRACK E Pocket Audio Recorder Basic Box with Timecode Support (Recorder Unit Only), BH # TETRACKEBB. to input an audio signal. It will not carry power.

Q: 5. can i use this cable out of a 633 to the Sony utx-B40 transmitter.. also is there a capacitor to get rid of the mic power from the transmitter?

A: We offer BH #AMX3F35EWSNY to go from the XLR output of a Sound Devices 633 recording into a Sony UTX-B40 transmitter, or Sony UWP series transmitter.

Q: 6. Can this be used to connect the Sennheiser G3 receiver to the Canon C70?

A: No, this Remote Audio cable has a female mini-XLR connector and you need a male mini-XLR connector for the camera's audio inputs. You can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K - Blue (B&H # KOMINIPLSBL) or the same cable in Black (B&H # KOMINIPLSBK) or the Cable Techniques Locking 3.5mm TRS to TA3M Cable for Sennheiser EK 100 G4/G3 to Canon EOS C70 (B&H # CACTMNG4C715) which has angled connectors.

Q: 7. will this cable work for inputing IFB using Lectrosonics LT transmitter from LiveU 600 ?

A: If your device has an 1/8'' audio output then yes, you can go from that into your Lectrosonics transmitters using the Remote Audio CALEC1/8T5FS cable.

Q: 8. What does the 40 dB Pad option mean?

A: The built-in pad on the Remote Audio Unbalanced Adapter Cable 3.5mm RA TS Jack to 3-Pin XLR Male with 40 dB Pad reduces the level of the output signal from the device it is connected to by 40 dB. This is often used when connecting a device with line level output signal to a microphone input on a camera or recorder.

Q: 9. Does this cable match the ZAXCOM pin out?

A: The pin-out configuration is not published.

Q: 10. Is it good to connect sennheiser G4 RX to Sound Devices 633 Line input?

A: Yes it is.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Nisi 82mm Circular White Mist Filter (1/4)

$285.00 $404.70

Nisi 82mm Circular Nd Filter Kit

$567.00 $827.82

Wolfen Un54 16mm Cine B&w Film (100' Roll)

$179.85 $251.79

Tiffen 58mm Black Satin 2 Filter

$209.97 $306.56

Tiffen 52mm Digital Diffusion/fx 1 Filter

$161.97 $217.04

Aida Imaging 12x Full Hd Ip Broadcast Ptz Camera

$2,700.00 $3,645.00

Underwater Kinetics Knife Strap

$31.50 $43.16