The Unbalanced Adapter Cable from Remote Audio features a balanced TA3F connector on one end and a 3.5mm TRS locking connector for Sennheiser Wireless Transmitters on the other. It can be used to connect audio mixers, recorders and other devices to a bodypack transmitter. The cable is built with professional-quality Neutrik, Remote Audio, and Canare brand components. In addition, its length is 18".

For Sennheiser Transmitters    18" Length    Neutrik and Remote Audio Connectors    Canare Cable

Related Questions and Answers

Q: 1. Would this cable work to connect a Shure SM58 to a Tentacle Sync Track E Timecode Audio Recorder?

A: Yes, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable can be used to connect a Shure SM58 Cardioid Dynamic Microphone to the Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 2. Hello all, i need 18 of cable THEN the connectors length on top of that so total length would be 18 (cable) plus length of connectors? SO since the specs do not have a drawing i must spew a question - thank you -Rollo (canare wire neutrik XLR female to TRS gold

A: The total length is 18 - end to end.

Q: 3. What is the function of the DC-Blocking Capacitor?

A: The Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable (4'), BH # RECASEK100M, contains a DC-blocking capacitor to prevent the passing of voltage that may damage the transmitter.

Q: 4. will this cable work for inputing IFB using Lectrosonics LT transmitter from LiveU 600 ?

A: If your device has an 1/8'' audio output then yes, you can go from that into your Lectrosonics transmitters using the Remote Audio CALEC1/8T5FS cable.

Q: 5. Will this connector work to connect a Countryman Lavalier mic that has a 3 pin XLR connector to connect it to a Sennheiser G2 or G3 wireless lav transmitter?

A: This would not work with a Countryman wired xlr since that specific mic would need 48v phantom power to run, which the Sennheiser transmitter will not provide. It would be recommended to purchase a Countryman mic wired for Sennheiser instead: BH #COB3W4BSR.

Q: 6. Will this cable work in Lark Max transmitter? I'm using rode NTG4+ SHOTGUN MICROPHONE

A: No, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable is not compatible for use with the Hollyland LARK MAX wireless transmitter. The cable has a locking 3.5mm TRS connector and the transmitter uses a non-locking connector. As a better option, try the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable - 3' (B&H # KOXRSM03B) or any similar cable with a non-locking 3.5mm connector.

Q: 7. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: Yes, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable can be used with the Xvive Audio P1 Portable Phantom Power Supply and Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 8. Can this be used to connect the Sennheiser G3 receiver to the Canon C70?

A: No, this Remote Audio cable has a female mini-XLR connector and you need a male mini-XLR connector for the camera's audio inputs. You can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K - Blue (B&H # KOMINIPLSBL) or the same cable in Black (B&H # KOMINIPLSBK) or the Cable Techniques Locking 3.5mm TRS to TA3M Cable for Sennheiser EK 100 G4/G3 to Canon EOS C70 (B&H # CACTMNG4C715) which has angled connectors.

Q: 9. Will this cable work between a lavalier comes with TA5 connector and 3.5 mm Mic input Transmitter (like G3)? I need to use a lavalier mic on both Lectro Lma and G3 so need kinda cable like this.

A: This cable will not work. Generally, your mics have to be wired appropriately for each wireless manufacturer's system.

Q: 10. Can I use this with to provide phantom power to two sets of Sennheiser MZA 900 P and Sennheiser ME 3 EW from the powered 3.5mm mic port on a Zoom H4n?

A: These cables will not pass phantom power reliably. They are designed for audio signal only.