The SKB 3SKB-R910U30 ATA Roto-Molded Shock 30" Rack Shipping Case is a ten-unit, 30"-deep roto-molded case. Features include compound hinged doors, black powder-coated stainless-steel latches, removable 4.0" casters, eight HM-245 elastomeric shock-mounts with a load range of 40-150 lbs, gasketed doors, and a pressure relief valve. The case meets most ATA or military specifications for shipping cases.

Roto-molded, polyethylene, shock-absorbing rack case

Standard 19" rack width as per EIA standards, with a ten-space rack height

Standard rack depth front to rear rail is 30"; lid depth is 4.5"

Meets most ATA and Military specifications

Frame with threaded steel rails and aluminum cross components form an "H" shaped rigid configuration.

Black powder-coated, stainless steel, key-lockable, recessed twist latches

Eight HM-245 elastomeric, high-damping, wide-temperature-range shock-mounts with a load range of 40 to 150 lbs.

"Plug" style lid-sealing system. Lids penetrate the body with an approximate 1" molded-in protrusion that provides sealing and anti-shearing properties.

Compound hinge system allows the lids to swing out 270° and rest along sides of the case, or to easily be removed and reinstalled.

Front and rear doors are fitted with rubber gaskets for water-resistant protection.

Automatic ambient pressure equalization valve (MIL-STD-648C)

Cases stack securely—with wheels on or off.

Both lids can be opened while cases are stacked.

Spring-loaded, rubber overmolded handles

Standard high-quality, slide-in/out, 4.0" locking swivel casters rated at 1200 lbs.

Related Questions and Answers

Q: 1. Do NOT use with Tamron 28-75mm 2.8 zoom?

A: Hi--the Tamron 28-75mm lens will fit in this case.

Q: 2. Will this case (9 x 13cm) fit for: Nikon AF-S VR Micro-NIKKOR 105mm f/2.8G IF-ED Lens /OR/ there is a better Lowepro alternative? THANKS

A: Yes, it will just fit the 105mm macro lens.

Q: 3. Does this case come with inserts?

A: The CB-11 case comes with custom foam for the AD400 Pro.

Q: 4. HI. I don't understand the dimension specifications. Which is the height, the witdh? I am lookimg for a lens case for my Rokinon 35mm and for a Tokina 11-16mm. Thanks.

A: the height is 13cmHope this helps

Q: 5. Will this case hold a Canon EF-S 55-250mm f/4-5.6 IS II lens?

A: I use this case for a TAMRON 70-300mm lens. With the back cover, UV protector, cap and a cap-keeper (elastic around lens with little button that sticks to the cap), my whole lens is 6 1/8 in. long. That fits, but it's a bit tight. I also keep the lens hood in the bottom which is fine because the lens fits through it. So, measure the length of your lens setup like you want it to go in there.This case has a mesh pouch in the lid which I can't use due to the length issue, but it could hold a battery, memory card or filter (but probably not in filter's original case) if you have a shorter lens.The interior diameter is 3-3 1/2 in. with good padding, almost 1/2 in. thick. My lens has plenty of room at just under 3 in. at widest point, still protected well. I have this case velcroed onto a matching Lowenpro zoom bag. Fits nice and tight, but the whole thing is a little unbalanced with no exterior pouch on the other side. That would be way too big for me. I compensate by wearing it cross-shoulder rather than in front with a chest or waste strap

Q: 6. Does this fit a Nikon Z 180-600mm ? Or is it too big?

A: The CL-L3 lens case does fit a Nikon Z 180-600mm lens. It is too big for it, but you can fit the lens with the body attached so that could be convenient.

Q: 7. Will a cannon 100 - 300 mm lens fit?

A: yes

Q: 8. Is the 6.0 x 3.5 large enough for a Zeiss 135mm ZF.2 APO, with the shade attached in the storage position? Thanks

A: I don't know if it will work with you lense, I use it for a differente one placing the hood on backwards when storing it the case.

Q: 9. Would the Ruggard 3.5x3.5 fit the Zeiss Batis 25mm lens?

A: Zeiss lists the dimensions of the lens at 81 x 78mm (3.19 x 3.07 ) so I would say the lens would fit in the Ruggard case, with one caveat without the sunshade. I hope this helps. I really like the Ruggard cases I have.

Q: 10. Will it fit the Sony macro sel90m28g?

A: The case is a too small. This is a few options that will work.1.Ruggard Lens Case 6.0 x 3.5 (Black) B&H # RULCY16X3 MFR # LCY-16X32.Lowepro Medium Zoom Lens Case 9x16cm (Black) B&H # LOLP36979 MFR # LP369793.Mountainsmith Lens Case (Medium) B&H # MOLCMG MFR # 14-81270-65