The Timecode Adapter Cable from Remote Audio features a 3.5mm connector on one end and a 4-pin LEMO connector on the other. It can be used to transmit timecode from an IFB, TC generator, or receiver with a 3.5mm connection to camcorders like the Red Epic or Scarlet (sold separately), and DSLRs or any device with a 4-pin LEMO input. The cable is built with Neutrik, Mogami and Remote Audio brand components and features a flexible braided sleeving for added durability. In addition, the cable length is 18".

For IFB, TC Generator, or Receiver    18" Length    Neutrik and Remote Audio Connectors    Mogami Cables    Flexible Braided Shielding

Related Questions and Answers

Q: 1. Does this cable work with the Arri Amira?

A: Yes it will work.

Q: 2. What does the 40 dB Pad option mean?

A: The built-in pad on the Remote Audio Unbalanced Adapter Cable 3.5mm RA TS Jack to 3-Pin XLR Male with 40 dB Pad reduces the level of the output signal from the device it is connected to by 40 dB. This is often used when connecting a device with line level output signal to a microphone input on a camera or recorder.

Q: 3. Will this connector work to connect a Countryman Lavalier mic that has a 3 pin XLR connector to connect it to a Sennheiser G2 or G3 wireless lav transmitter?

A: This would not work with a Countryman wired xlr since that specific mic would need 48v phantom power to run, which the Sennheiser transmitter will not provide. It would be recommended to purchase a Countryman mic wired for Sennheiser instead: BH #COB3W4BSR.

Q: 4. Can this cable provide Tentacle sync to a Red?

A: I do not believe this cable will work. While we do not sell the Tentacle System, I was able to find this diagram on their website that shows cabling going from the Tentacle to a RED camera. RED cameras have a 4 Pin LEMO, not 5 Pin.http://bit.ly/2hI7TYMWe do have B&H #RECAZERXEPIC, which is a TRS 3.5mm to 4 Pin Lemo. This cable may work, but you really will want to consult directly with Tentacle for their opinion on the matter first.

Q: 5. Does this cable match the ZAXCOM pin out?

A: The pin-out configuration is not published.

Q: 6. Does it pass phantom power? Thanks

A: Yes it does

Q: 7. Can I use this cable to jam my Denecke SB-3 with my Sound Devices 788T?

A: No this is for iOS devices. You need the single ring 1/8 connector. You need to cables to do it. This one a href= http://www.bhphotovideo.com/c/search?Ntt=laird+digital+cinema+sd-tcd2-01&N=0&InitialSearch=yes&sts=ps target= _blank http://www.bhphotovideo.com/c/search?Ntt=laird+digital+cinema+sd-tcd2-01&N=0&InitialSearch=yes&sts=ps/a and this one. a href= http://www.bhphotovideo.com/c/product/889382-REG/psc_fpsc1082_1_bnc_1_8_mini.html target= _blank http://www.bhphotovideo.com/c/product/889382-REG/psc_fpsc1082_1_bnc_1_8_mini.html/aThats how we did it.

Q: 8. Which direction does the TC travel on this cable? Does it output through the 3.5mm end or the 5 pin lemo end?

A: This cable is made to send time code from a TC generator, using the Lemo connection, going into an iPhone or iPad's 3.5mm mic level input.

Q: 9. Is this wired properly to feed a line level to the Alexa Mini audio in?

A: This cable is designed for timecode use only and for connection to smartphones.

Q: 10. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: The Remote Audio Unbalanced Adapter Cable 3-Pin XLR Female to 3.5mm RA TS Mini-Jack (18"), BH # RECAX3F18M, will work with the Tentacle Sync TRACK E Pocket Audio Recorder Basic Box with Timecode Support (Recorder Unit Only), BH # TETRACKEBB. to input an audio signal. It will not carry power.