The white Electro-Voice Sx300E is a 12" 2-way 300W passive loudspeaker offering versatile installation options and full-range sound reinforcement for DJ/AV setups and a variety of live stage applications such as theater production and concerts. Its 12" woofer and 1" titanium-diaphragm, high-frequency compression driver yield an 80 Hz to 25 kHz frequency response and boast a 300W continuous power handling rating (1200W peak). The high-frequency driver outputs through a constant-directivity Varipath horn for uniform coverage while Ring-Mode Decoupling enhances clarity.

For Live Stage, Theater & DJ/AV Setups    12" Woofer, 1" Titanium HF Driver    300W Continuous Power Handling    80 Hz to 25 kHz Frequency Response    Constant-Directivity Varipath Horn    Ring-Mode Decoupling Enhances Clarity    Dual Neutrik speakON Inputs    Integrated Pole Socket and Carry Handle    Four M8 Fly Points    Ported Polypropylene Cabinet

Compact, portable loudspeaker with high efficiency and high output for live sound, speech reproduction, and DJ/AV/institutional use

Handles up to 300W continuous power (1200W peak)

RMD (Ring-Mode Decoupling) for increased intelligibility

1" exit DH2010A high-frequency compression driver equipped with a titanium diaphragm and convex-drive TimePath phasing plug structure for smooth and extended high-frequency response

Compression driver voice coil is coupled to the diaphragm with Electro-Voice's exclusive Resonant Drive technology, which increases and smooths the high-frequency response and reduces the amount of internal equalization required for flat-frequency response

Molded-in, constant-directivity horn with Varipath throat geometry to help the driver output to the corners of the room, areas not described in the usual specifications of horizontal and vertical coverage angles

65 x 65° uniform coverage pattern—sound quality is well maintained off-axis, even at 45° off-axis (a 90° total coverage angle)

Features Electro-Voice's PRO circuit, which prevents against accidental overdrive to the compression driver and improves system reliability—if the input power to the high-frequency driver exceeds the nominal rating, the protection circuit is activated and reduces the power delivered to the driver by 6 dB until input power is reduced to a safe level

Sturdy high-impact polyproylene trapezoidal cabinet with steel grille

Integrated 1-3/8" pole socket and four M8 attachment points enable versatile mounting and installation

Bottom-mounted rubber feet and top-panel mating sockets allow secure stacking

Related Questions and Answers

Q: 1. Can i use it with a canon 500mm f4 is mk 1 lens canon 1d mk iv body 2x extender and sirui p424 monopod?

A: Yes, you can use ir.

Q: 2. Using an L bracket, can this head be used for vertical panos?

A: Although it is possible to attach an L-bracket to the Sirui L-20S 2-Way Pan/Tilt Head, it has not been tested as a head for shooting vertical panoramic images. The results may vary in this case.

Q: 3. Is the Kessler kwik short plate compatible with the Sirui L20S?

A: Yes, the Kessler Crane Kwik Short Camera Plate can be used on the Sirui L-20S 2-Way Pan/Tilt Head.

Q: 4. Will this head allow me to shoot portrait mode?

A: Yes, it does! It has an adjustable plate, which allows you to rotate 90 degrees, and hence move your camera from landscape to portrait mode, without putting your quick release plate on sideways. It's one of the major upgrades from the L-10

Q: 5. I use RRS L brackets on my Fuji X bodies. Will the Arca-Swiss type clamp on this head hold RRS plates and L brackets securely?

A: I have used it with a Kirk L bracket with no issues.

Q: 6. Are the clamp and plate Arca Swiss compatible?

A: Yes the clamp and plate are both Arca-Swiss compatible.

Q: 7. My tripod has a 1/4 inch dia. mounting bolt. Is there a shim or adapter that will allow me to mount it on my tripod?

A: Totally. It's called a bushing, or bushing adapter. It screws onto your 1/4"-20 screw and has an outer diameter and pitch of 3/8"-16. You can get ones like these: Wimberly https://bhpho.to/3rQwUEA Oben https://bhpho.to/37h92lQ

Q: 8. Can this head be used on the Manfrotto Advanced Travel with the 494 ballhead?

A: Yes.

Q: 9. I own a 66.5 3 Legged Thing mono pod with 3/8 mounting screw coming out of a 2 diameter mounting plate.Will it work with this setup?

A: I believe your set up will work without any issue. I used it with my Sirui CF monopod that also has a 3/8 mounting screw and it is very sturdy & flexible.

Q: 10. Where can one buy extra plates for this, does Sirui sale them ?? Jim

A: Click the link below to view the plate on our website; https://bhpho.to/3hyJUJO