The Tiffen 3 x 3" #13 (2) Green Filter is a basic contrast filter, primarily for use with black and white film. This green filter subtly darkens skies and lightens foliage. It is commonly associated for use with portraiture and attaining greater separation from skin tones and outdoor backgrounds. When compared to the #11 yellow-green filter, the #13 helps to lighten foliage and other green-colored subjects more.

There is a 2x filter factor with this filter, requiring an increase of 1 stop for normal exposure. Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 10,000th of an inch. This filter measures 3 x 3" / 76.2 x 76.2mm.

#13 Filter for General B&W Contrast    ColorCore Technology

Green contrast filter for black and white film subtly darkens skies and lightens foliage.

Suited for portraiture, this filter helps to separate skin tones from outdoor backgrounds.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 10,000th of an inch.

Related Questions and Answers

Q: 1. will the Nikon Z 180-600 fit in this case?

A: Unfortunately, the Lowepro Lens Case 13 x 32cm (Black) is slightly too small to fit the Nikon Z 180-600.

Q: 2. Will this case fit my Nikon 400mm f3.5 lens?

A: No, the Nikon 400mm f/3.5 lens will not fit in the Lowepro Lens Case 13 x 32cm (Black). The Lightware Z400 Long lens 400 Case would be able to hold this lens.

Q: 3. Can I put a tamron 150-600 (hood reversed) + Sony a7r ii (attached) in this case? Thx for your help.

A: While I don't have a Sony, my Tamron 150-600 (Canon mount) pretty well takes up the whole case. Looking at the dimensions of your camera, there would not be the needed 2.5 depth need to leave the camera attached. You need something like the Tamrac 517 tele-zoom pack.

Q: 4. Will this work for my Nikon 200-500?

A: I just got this case for my Nikon 200-500 5.6 lens and it fits in this bag perfectly with both tripod mount and lens hood attached. The lens hood does need to be in the reverse position. The fit is snug enough as to not allow the lens to jostle around too much but loose enough to allow for very easy insertion and removal from the bag.

Q: 5. Will this fit a sony 200-600 with tripod foot attached and lens hood reversed?

A: It will be a little tight fit

Q: 6. Is this a good fit for the Sigma 150-600 + MC11 adapter on + the tripod mount?

A: The Tamron 150-600 fits perfectly. I believe the Sigma has similar dimensions

Q: 7. I have a nikon 55-300 lens will this case fit it?

A: Yes. It is probably a bit oversized as the cas is some 13 inches long against a lens that is 5 inches long.

Q: 8. What Lowepro will fit a nikkor 80-400mm AF D lense?

A: Not sure. The 13 x32 cm case I bought was for a NIKKOR 200-500. It fits a little snugly, but works ok with the lens hood reversed and on the lens. The specs for the 80-400 indicate that it is shorter and more slender, so a 13 x 32 cm case may be too big.

Q: 9. Will this fit the Nikon AF-S 80-200 f2.8 ED IF (The AF-S version) ?

A: I purchased this lens case for my Tamron 150 to 600mm super zoom lens. That lens fits perfectly into the case which is very well made, well padded, and secure. If the lens you are purchasing (or already own) is a bit shorter than the Tamron lens, you might consider adding some rubber pads at the bottom of the case to hold the 80 to 200mm lens firmly. I'm sorry, but I do not know the dimensions of my Tamron lens off the top of my head.

Q: 10. Would the Canon RF 200-800 with reversed hood fit this? Concerned mainly about the non-removable foot.

A: Canon RF 200-800mm f/6.3-9 IS USM Lens (Canon RF) is 13.5 inches long with the lens hood and the rear lens cap attached. The interrior height is 12.6 inches on Lowepro Lens Case 13 x 32cm (Black) won't fit the lens.