This 1" x 50 yd, black Permacel/Shurtape #672 Professional Gaffer Tape is a 12 mil thick industrial-grade, matte-finish, cloth tape which can be used wherever a strong, abrasion-resistant, weatherproof cloth tape is required. It's used for securing and holding overhead lighting and cables, set and stage decoration, or holding down audio or other light to medium gauge wire. Other uses include art, framing, display and graphics, stage blocking, and spiking. Those involved in film, video, and theatrical production of any sort find it an indispensable item. It's also widely used in commercial and industrial fields for protection, holding items together for binding, sealing, packaging, splicing, bundling, and repairing.

Matte Cotton Cloth Backing    Weather Resistant    69 lb per Inch    Hand Tearable    12 mil Thickness

Related Questions and Answers

Q: 1. What is the difference with the v.2.0 compared to the original v1?

A: I can't give you a straight answer on it sine I never used the previous version, but I'm very happy with the v2, with the bottom extension fits even my 500 lense. The pockets accomodate the acessories I carry around and it's been under harsh conditions around the globe without any problems.

Q: 2. Will the Fujifilm 150-600mm lens with Fujifilm XT3 fit in this bag?

A: The Think Tank Photo Digital Holster 50 V2.0 will fit the Fuji XT3 camera and 150-600mm lens.

Q: 3. Will this holster bag accommodate a Nikon D3s with Nikon 300mm f/4 AF ED (Screwdriver AF lens)?

A: I use Canon so I can't say whether your Nikon body and lens will fit or not, but measuring the interior demensions of the bag with the nose extension zipped it is 12 inches deep. Unzip the nose and the bag extends to 15 inches deep. The extension bellows is a slightly padded Cordura nylon fabric. The top opening is a good 7 by 7 1/2 inches. The quality of the materials is first rate and the manufacturing workmanship of the bag is absolutely flawless. The shoulder strap is just adequate. Tamrac curved padded shoulder straps are much better. Over all, I would strongly recommend this bag if its size fits your needs.

Q: 4. Will a Canon 5DMk IV, with battery grip + L bracket, fit in this camera bag..??

A: Yes. The following will provide a nice snug fit for the following camera and grip combo.

Q: 5. Assume this would work with shorter lens as well, say 24mm-120mm f/4?

A: I purchased this holster to fit my Pentax K3 w/Sigma 50-500mm and it fits perfectly when extended. I am not sure how long your 120mm is, but I can assure you that you can easily fit it into this holster bag and probably be able to fit another lens down into it as well. It's an awesome bag and I hope that I have helped to answer your question. :-)

Q: 6. Will it fits the canon EOS 5DS R with battery grip and EF 70-200 f/2.8 IS II USM + lens hood or without hood?

A: I use my Digital Holster 50 with Nikon D800 + grip with 70-200. The case holds this with or without hood as holster can extend to accommodate lens w/hood...one of my favorite camera bags/cases.

Q: 7. Will this fit a canon 5d mk iii with extender 2 x lll and lens 100-400 ll generation

A: The short answer is yes. The long answer is: I own the 5d mkiii, the 100-400 ii (with Kirk tripod foot for this lens - highly recommended), and the canon 1. 4 x (not the 2x). In addition, I have the Vello battery grip installed as well as the ProMedia 4 L bracket, so my camera configuration is larger than what you're asking about. My configuration is a bit tight in the Think Tank holster, but it does fit. Your configuration shouldn't be as tight. I have several Think Tank products; they are all of high quality. Hope this helps. GLA

Q: 8. I have Nikon D810 with battery grip and L-bracket. would this fit?

A: Without the grip, there is just enough room to slide your fingers along the side to remove the camera. I do not utilize grips, but there is about 1 1/2 to 2 of space between my L bracket and the holster depending how snug you want the fit. Presuming it's a typical arca style bracket, and has nothing else attached, it should fit, but I wouldn't expect a fast draw from the holster,as it may be snug depending on how you intend to carry it.I would definitely loosen the velcro belt strap to insert the camera, then reseal the velcro, as this may give just a bit of extra space to fit the grip easier. I do this when my Spider holster mount is attached with an arca mount and then attached to the L bracket. The Spider mount with arca plate adds 1 3/4 inches to the height and it fits comfortably in the holster, but obviously it doesn't take up the space of a grip. I would say as long as the grip adds no more than 2 to the body, it should fit. The closer to 1 3/4 to 2 , the more snug the fit will be. Under 1 3/4 , and it should fit comfortably. Hope this helps!

Q: 9. Does it fit the Canon 80D attached the Sigma Contemporary 150-600mm no battery grip but with tripod collar intalled ? thanks.

A: I don't have an 80D but do use the Digital Holster to hold to the Tamron 150-600 attached to a Canon 7DII with the collar attached. It's a very tight fit but it does work, provided I take off the lens hood first. The extended bottom make it long enough to hold the lens and the body but the extension at the bottom of the holster is too narrow to house the hood mounted on the lens.

Q: 10. Will this bag fit the Nikon Z6II with the 180-600mm Zmount (hood inverted)?

A: No, the Think Tank Photo Digital Holster 50 V2.0 (Black) is too small for the Nikon Z6II with the 180-600mm Zmount (hood inverted). That combination the Kinesis C850 Extra Large Holster Case (Black), https://bhpho.to/3YbKns7 is best.