The Tiffen 95mm Coarse Thread CC20R Red Filter is a color compensating (or color correction) filter for use when making color balance adjustments. It can be used to alter the color balance of a scene by placing in front of a light source or the lens of your camera. It can also be used to apply color corrections when used in the darkroom with an enlarger or to help pre-visualize color adjustments when viewing prints.

Red is the opposite of cyan and can be used to reduce cyan tones or casts within a scene or print. This red CC20 is more dense than a CC10 filter and less dense than a CC30 filter, and requires a 0.3 stop compensation for normal exposure results.

Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, then mounting to precision metal rings.

CC20R Color Compensating Filter    1.2x Filter Factor, +0.3    Achieve Proper Color Balance    Alter Color Balance    Useful for Printing and Viewing    ColorCore Technology    95mm Front Filter Threads    Plastic Case

Red color compensating filter for use when making color balance adjustments.

Red is the opposite of cyan and is added to reduce cyan tones or color casts within a scene or print.

This filter has a nominal peak density of 0.20, and a 1.2x filter factor, requiring a 0.3 stop compensation.

Plastic filter case for storage and transport.

Related Questions and Answers

Q: 1. Does one need a cover if one removes the L series battery plate?

A: We do not believe a cover would be needed.

Q: 2. Will this bag hold the SONY 6300 plus two lenses, xtra battery and filters?

A: Yes, I agree with the owner of the Oly OM D EM10, which I have also. I carry the body with prime lens, a 75-300mm tele, and the 12-40 pro. Plenty of room for filters and extra battery.

Q: 3. For the Arri Alexa Mini what does the software NOT support?

A: The supported camera controls for the Alexa Mini are. Record Start Record Stop Playback Control Set and Read TC Set and Read Project Rate Read and Set System Date/Time Read Clip List from Medium Camera Type Camera Serial Camera State Look File Name Color Temperature Tint Variable Exposure Index Sensor FPS List Sensor FPS Shutter Angle List Shutter Angle Exposure Time List Exposure Time Exposure Index List ND Filter List ND Filter White Balance List Media Status Recording Mode Clip Scene Clip Take Medium Type Model Name Serial Number Clip Count Current Reel Medium Size Medium Status Write Protection Clip Count Current Reel Free Capacity Clip File Name Clip UUID Clip Project Rate Clip Start TC Clip Duration TC

Q: 4. Is bolt 1000 receiver compatible with Cine 7 500 TX?

A: Yes, the Cine 7 500 TX can be paired with the Bolt 1000.

Q: 5. Is it compatible with Bolt 4K?

A: this is built with the BOLT 500 transmitter and hence is compatible with receivers that work with the BOLT 500 transmitter

Q: 6. Approximately how long could a 98WH 14.8V battery power this monitor for?

A: A 98Wh, 14.8V battery will power the SmallHD Cine 7 for about 16 hours.

Q: 7. Does the Komodo kit come with a d-tap cable?

A: A D-Tap cable is not included. Here is a link to an option that will work. https://bhpho.to/2OdoNDP

Q: 8. Does this kit include RED Komodo control and the required cables?

A: No it does not include the control for the RED Komodo. The link below is the kit you would need instead: https://www.bhphotovideo.com/c/product/1616857-REG/smallhd_mon_cine_7_komodo_cine_7_red_komodo.html?sts=pi&pim=Y

Q: 9. Can you turn the TX/RX off when you don't need it to lower power draw?

A: yes the transmitter can be disabled when not in use and it will reduce the power draw

Q: 10. Does this monitor receive signal from TERADEK ACE 800?

A: At this time the SmallHD Cine 7 500 RX will work with only Bolt 500 transmitters.