The GLIDECAM X-10 Dual Support Arm Stabilizer Vest System is a professional camera stabilization system designed for use with the Glidecam Devin Graham Signature Series, HD-PRO, XR-PRO, HD-2000, and HD-4000 stabilizers. It can also be used as vest/arm support for stabilizer gimbals such as the DJI Ronin or FreeFly MōVI. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles, and travel over uneven terrain without any camera instability or shake.

For Glidecam HD/XR-PRO, HD-2000/4000    Also for Devin Graham Signature Series    Vest/Arm Support for Stabilizer Gimbals

Glidecam Devin Graham Signature Series, HD-PRO, XR-PRO, HD-2000, and HD-4000

Can be used as vest/arm support for motorized gimbals such as DJI Ronin or FreeFly MoVI

The X-10 comes with both sections of its support arm being able to move vertically, compared to the Smooth Shooter which comes with only the front section of its support arm being able to move vertically. Also, the X-10 comes with a trimmable arm-to-vest connector.

The GLIDECAM X-10'S support arm can be boomed up and down, as well as pivoted in and out and side to side. The combined booming and pivoting action of the support arm isolates your motions from the camera in a way that creates smooth camera footage.

The Glidecam X-10 support vest is lightweight, comfortable and can be adjusted to fit a wide range of operators. High endurance, dual-density, EVA foam padding, and T6 aluminum alloy create a vest that can hold and evenly distribute the weight of the system across the operator's shoulders, back, and hips. For safety, quick release buckles allow the vest to be removed quickly.

Related Questions and Answers

Q: 1. How big is the gimbal handle? I have a friend who has an off brand flycam galaxy arm and steadycam vest says it fits 16mm gimbal handle. I know I want to order the glidecam hd2000, but won't get the vest unless it fits the off brand one he can practically give me. Anyway, does anyone know what the gimbal handle size is and if it would work with a 16mm arm post?

A: The Glidecam HD2000 gimbal handle has a 7/8/0.875 /22.225mm hole. The post from the off brand arm would be 6.225 mm too small. That is not much so maybe it will still work. Your move.

Q: 2. Will this be strong enough for a Canon EOS 5D Mark III and a 24-105mm Lens?

A: Yes, the Canon 24-105mm lens is 1.47 lbs and the Canon 5D Mark III body is 1.89 lbs. The Glidecam HD2000 will accomodate 2-6 lbs, thus making this set-up compatible.

Q: 3. Will the Glidecam X-10 Support Arm Stabilizer support 25 lbs?

A: The Glidecam X10 is designed to be used with specific Glidecam Stabilizers. The option with the largest load capacity is the HD4000, which can handle up to 10 pounds and weighs around 3 pounds itself. The X-10 is really designed to handle no more than that combined weight of around 13 pounds. It will not support 25 pounds. Feel free to email us at provideo@bhphoto.com so we can help you find the appropriate Arm and Vest Kit for your needs.

Q: 4. Will this work with HD PRO?

A: Yes, this will work with the Glidecam HD-Pro.

Q: 5. Can the flat plate on top of the glidecam be removed and just put the quick release plate on?

A: No the flat plate on top is also the front to back and side to side adjustment. The quick release that was promoted for this item is a very poor design. Difficult to release because of the quick release location.

Q: 6. does the gimbal move

A: If balanced properly the sled and post should remain level and plumb regardless of the handle position.

Q: 7. Will this work with a Blackmagic Pocket Cam or GH4?

A: Yes its will. The GH4 will be a little bit trickier to balance just because it is so light. I always have an easier time balancing lightweight DSLR's when I add an attachment to the camera to provide a little more weight (such as a camera mounted LED).

Q: 8. Is there a Ronin S adapter for the X-10?

A: We are not aware of an adapter for this system that will allow you to use a Ronin-S. However you could look at the Glide Gear DNA 6000 Stabilization System with Vest, Arm & Gimbal Adapter instead, B&H # GLDNA6000VAO. It will be able to work with the Ronin-S. https://bhpho.to/2DGkokw

Q: 9. It's refurbished or new?

A: This Glidecam X-10 Dual Support Arm Stabilizer Vest System, is new in a box and not used or refurbished.

Q: 10. Is there a warranty with this item?

A: The HD2000 comes with a 90 Day Warranty.