8 Camera Video Surveillance Power Requirements

Rf-links Sdx-22lp Low Power Video Transmitter

Product Code: ga231333
Availability: In Stock

$1,796.85 $2,839.02

Qty

9 reviews Write a review

Description
Reviews (9)

The RF-Video SDX-22LP is not only incredibly small but also requires very low DC voltage in order to operate. This makes it an excellent choice for mobile application where size and battery power are two of the most crucial factors in determining a transmitter's effectiveness.

Parameters
Signal System	NTSC/PAL/SECAM
Operating Frequency	2.4 GHz
Channels	Single channel
RF Power Output	35mW
Modulation	Not Specified by Manufacturer
Antenna	Not included (requires SMA type antenna)
Impedance	50 ohms
Wireless Range	Not Specified by Manufacturer
Video Inputs	Open wire
Audio Input	No
Power Requirements	4.5-6.5 VDC
Power Consumption	60mA
Operating Temperature	-15 - 172°F (-26 ~ +78)
Dimensions	0.5 x 0.12 x 0.5" ( 12.7 x 3 x 12.7mm)
Weight	0.07 oz (2 g)

Requires only 6 volts of DC power in order to operate

Ultra compact and lightweight transmitter, ideal for covert and mobile surveillance

Withstands extreme high and low temperatures

Compatible with NTSC and PAL video systems

Related Questions and Answers

Q: 1. Can I use a Hollyland Mars 4K Transmitter with a Mars 400 HDMI receiver? Setup would be - Red camera uses the SDI port on transmitter and HDMI port on the receiver.

A: The Hollyland Mars 4K Wireless Video Transmitter is not compatible with the Mars 400.

Q: 2. Can this accept and output 4k 23.98p? I've had other Hollyland products round to 24fps and it wouldn't work with my switcher because of that.

A: The Hollyland Mars 4K would still output 24p in 4k. Only when you are using the SDI input would the kit support 23.98p and then output 23.98p( SDI/HDMI) However this is 1080p.

Q: 3. Red Compatible? I'm using just the TRX and looping HDMI out from a SmallHD to the HDMI input of the TRX, but says no vid. Help?

A: If you are outputting from a RED camera please make sure the framerate is correct to support the Hollyland Mars 4k. Please note the SDI port on the Mars 4k only supports - 1080p: 60/59.94/30/29.97/24/23.98.

Q: 4. can the antennas be removed and extended via an sma cable?

A: For the Hollyland Mars 4K Wireless Video Transmission System, the antennas aren't removable.

Q: 5. How many receivers can be used simultaneously with thee Hollyland app? Can I use a transmitter with two receivers plus one app?

A: The Hollyland Mars 4K Wireless Video Transmission System can never use more than one (1) receiver as it is a 1-to-1 system.

Q: 6. Can i Convert the signal from 1080p hdmi to 1080i sdi?

A: No, the Hollyland Mars 4K Wireless Video Transmission System would not be able to convert 1080p to 1080i. However, the kit does support inputting from HDMI and outputting though SDI.

Q: 7. How long would a 10050mah battery last on these if I had it transmitting from my laptop to BenQ monitor?

A: The Hollyland Mars 4K Wireless Video Transmission System will get approximately 8.5-10 hours with an 10,050mAh NPF battery.

Q: 8. Sdi 3g

A: The Hollyland Mars 4K Wireless Video Transmitter has 3G-SDI I/O.

Q: 9. Are these transmitters compatible with the Mars 400 Pro? To receive and transmit obviously in 1080p?

A: The Mars 400 is not compatible with the Hollyland Mars 4K Wireless Video Transmission System. However, the Mars 4k can work with the Mars 400 S PRO, Mars 300 PRO, and the Mars M1 display.

Q: 10. Can this transmitter be used with kit, I need two transmitters and one receiver?

A: The Hollyland Mars 4K Wireless Video Transmitter is a 1 to 1 system, meaning one transmitter sends to one receiver. You can connect 4 additional phones/tablets from a non real-time view of what is being transmitted.

Dick	21/09/2024
I like the ease of being able to quickly remove and replace my camera strap. When I'm out waking around I like to have the strap on, but when I'm using a tripod the strap is in the way, so off it goes. 5

Francisco	11/09/2024
Very convenient. Easy to install, easy to use. It really works. I recommend it. 5

DOU	07/09/2024
Very good product, let me use the camera more conveniently. It looks very sturdy. 5

anyonymous	01/07/2024
I am a hobbist filmmaker. I Used these anchor links at one event. Worked like a charm. I switch on and off from my steadicam to handheld often to get certain shots. It has served to be quite useful and fulfilled its purpose, validating my decision to purchase it. I advise if you are on the fence in deciding to buy a set, just buy it. You wont regret it! 5

Bob	29/05/2024
This is one of those times a simple design is the best idea. The clips are easy to install and provide total security for your camera, I'm so glad I ordered a set. 5

Keigo	27/05/2024
Honestly, this is a simple gadget. But this effects me a lot of benefits. I am using a normal strap which is included with my canon camera. Actually, I didn't have any complaints while normal using way. But when I put the camera in my bag or use a tripod, the strap was very annoying. So I bought the anchor links!! This provides an easy way to remove the strap. So I like it!! 5

Alan	17/05/2024
This is a must-have for all my current and future cameras. Once you have it, you can't go back. Great job Peak Design!! 5

Francesca	01/05/2024
Simple, solid, practical, reliable. With little expense, the strap supplied with the camera becomes a practical detachable strap which, when necessary, releases and favors greater maneuverability of the camera. Simple and brilliant. Recommended for everyone. 5

Daniel	17/04/2024
I love to use the camera strap but when you want to use a gimbal for example, the strap will need to get off the camera...well now, do it in a really short matter of time! It takes a few seconds to click it in or out! 5