You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Highest Gain, With Detachable 2mm Cable And Lemo 4-pin Connector For Telex Wireless Transmitters (black)

Countryman E6 Directional Earset Mic, Highest Gain, With Detachable 2mm Cable And Lemo 4-pin Connector For Telex Wireless Transmitters (black)
  • Product Code: ga231418
  • Availability: In Stock

$1,925.19 $2,579.75

The black E6 Directional Earset Mic, Highest Gain, with Detachable 2mm Cable and LEMO 4-Pin Connector for Telex Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a LEMO 4-pin connector for direct connection to a Telex WT-200, WT-400, or WT-450 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    LEMO 4-Pin (TL), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersTelex: WT-200, WT-400, WT-450
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x LEMO 4-Pin
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersTelex: WT-200, WT-400, WT-450
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB
Sensitivity6.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x LEMO 4-Pin
Cable Length5' / 1.52 m
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBlack
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. Does this work with Sony A7SIII?

A: Yes, the Vello ShutterBoss II Timer Remote Switch for Sony Multi-Terminal is compatible with the Sony Alpha A7S III.

Q: 2. I saw one comment about it requiring the use of the hot shoe. Is this correct? and if so, is there a way to use this with a flash as well?

A: It is not required to use the hot shoe. It's merely a place to attach it to the camera. It can dangle from the cord attached the remote input if need be.

Q: 3. does this unit work with extension cord MC-21 from Nikon?

A: The Nikon MC-21 is specifically designed for use with Nikon 10-pin remote shutter releases. Unfortunately, we cannot guarantee that it would work with a third party remote shutter release such as the ShutterBoss. We dont have one in stock to try.

Q: 4. Will this remote work with a digital Sony a99 camera? It only shows that it will work up to a Sony a77ii digital camera.

A: yes it works very well with sony

Q: 5. Is this the best choice for a Canon Mark III 5D?

A: No, that version is not compatible. For the 5D Mark III you need this one. http://bhpho.to/PNMxo0

Q: 6. Is there a maximum number of images that can be taken with this product in time lapse mode?

A: You should have no issues taking an infinite number of photos in time laps mode,

Q: 7. work with a6000?

A: This shutter release has been replaced with this one: Vello ShutterBoss II Timer Remote Switch for Sony Multi-Terminal B&H # VERCS2II. And yes it will work with the Sony a6000 or any Multi Terminal Sony camera for that matter.

Q: 8. Does it work with canon 6 D mark II

A: If the camera model has a sub mini connection it will work but not if your camera has a 3 pin connection. Check what kind of connection your camera has to make sure you get the right product.

Q: 9. will it work with the canon r?

A: No, the Canon EOS R Mirrorless Digital Camera has a Sub Mini Connection ands will not work with the Vello ShutterBoss II Timer Remote Switch for Canon with 3-Pin Connection. The correct remote would be the Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, BH #VERCC12 (https://bhpho.to/2WOUJT3).

Q: 10. will it work for Lumix G9.? and also in which port we need to connect this shutter release. Thanking You

A: Yes, this remote will work for the G9. On the right side of the camera is shutter release port.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Audio-technica Ae-4100 Vocal Microphone

$567.00 $816.48

Akg C7 Reference Condenser Vocal Microphone

$897.00 $1,327.56

Mxl Cr77 Dynamic Stage Vocal Microphone

$539.85 $798.98

Akg Wms 470 Vocal Set Wireless Microphone System

$1,995.00 $2,673.30

Akg Wms 470 Vocal Set Wireless Microphone System

$1,995.00 $2,952.60

Shure Ksm9 Handheld Microphone

$2,097.00 $2,621.25

Products You May Like

Impact Cc-125 Adjustable Gaffer Clamp

$88.08 $123.31

Gura Gear Kiboko 2.0 Backpack (black, 22l+)

$1,079.85 $1,565.78

Pspaudioware Psp X-dither Mastering Dither

$297.00 $469.26

Tenba Roadie Backpack 22 (black)

$899.85 $1,286.79

Tiffen 72mm Warm Black Pro-mist 1/4 Filter

$359.97 $460.76