The Countryman E6i Cardioid Microphone is a miniature ear-set microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The cardioid version effectively minimizes off-axis feedback and noise from nearby monitor speakers, instruments and noisy sources. Flexible microphone positioning is maintained and the included windscreen minimizes the wind noise often associated with cardioid microphones.

The E6i is set apart from the original E6 with its softer flexible boom and silicon ear-pads. The flexible boom provides ease of boom adjustability to accommodate multi-user applications.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is tan and features a Switchcraft TA4F connector for use with Samson wireless transmitters.

Switchcraft TA4F for Samson    1mm Diameter Cable    Strong Vocals    Cardioid    Tan

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The cardioid polar pattern is effective in minimizing off-axis residual noise from e nearby monitor speakers, instruments and loud sources. The result is increased signal-to-noise ratio and minimal feedback. The flexible boom provides a custom fit for multiple users and close microphone positioning. The E6i is also available in an omnidirectional version for maximum control over wind noise and plosives (popping).

This E6i's sensitivity response is optimized to accurately capture strong vocals without noise and distortion. The high headroom is well suited for singers and performers in stage and broadcast applications.

Related Questions and Answers

Q: 1. Will this set work with Nikon d780?

A: Unfortunately no, it is not compatible with the D780.

Q: 2. If i buy a wr-b11 and a wrt10 will one remote trigger both cameras that will be connected to them ?

A: Yes, a single WR‑T10 can be paired with multiple WR‑R11b controllers and used to simultaneously release the shutters on multiple cameras with one press of the WR‑T10’s shutter-release button.

Q: 3. I'm confused between the wr-r11b vs. wr-r10b. For a D7500, can either work? If I get the wr-a10 adaptor, will I be able to connect the wr-r11b to my D5 and D500 (like I can the wr-r10)?

A: Unfortunately the Nikon WR-R11b does not work with the Nikon WR-A10. Both the WR-R11b and the WR-R10 work with the Nikon D7500.

Q: 4. Compatible with the Z8?

A: No, the following transmission system is adaptable to the following Nikon bodies at the moment Nikon COOLPIX P1000 Nikon COOLPIX P950 Nikon D3200 Nikon D3300 Nikon D5200 Nikon D5300 Nikon D5500 Nikon D5600 Nikon D610 Nikon D7100 Nikon D7200 Nikon D750 Nikon D7500 Nikon D780 Nikon Df

Q: 5. Can this be used to fire a D810 remotely or do I need to add something else?

A: Yes, the Nikon WR-R11a/WR-T10 Remote Controller Set would be compatible for use with the Nikon D810 DSLR camera. No other items would be needed. You would connect the Nikon WR-R11a to the 10-pin remote terminal on the front of the Nikon D810 DSLR camera, and you would press the shutter release button on the Nikon WR-T10 Remote Transmitter to wireless trigger the Nikon D810 from up to 98 feet (30 meters) away.

Q: 6. With the plate and pin attached to my camera, can I also attach a Spyder hand strap to the camera? What about a camera in a camera cage? (Panasonic GH6)

A: A Spider Holster Hand Strap can be used in conjunction with the Spiderpro Dual Mirrorless Camera System V2. As for using it with a camera cage for the Panasonic GH6, that would depend on the exact cage.

Q: 7. Does this come with two pads ?

A: Yes, two pads will be included.

Q: 8. how do yuo take tye camera off the belt and attach it to a tripod?

A: Thank you. The SpiderPro plate has two 14/20" threaded holes (this is a UNIVERSAL thread just like the one at the bottom of your camera) so ANY tripod or tripod plate QR will be able to attach. The SpiderPro plate is designed to allow as much room as possible for almost ANY tripod head connection. Connect your current Tripod plate you are using to the Spider plate and you'r good to go to tripod anytime!. Thank you, Spider Team

Q: 9. Can it work for the. Nikon D4S, Nikon D850 and Nikon Flash SB5000. ? Thanks

A: Yes the WR R11aWR-T10 will work with the D4S and D850 and SB500.

Q: 10. I am confused. The q&a answers here suggest that this is not a match for the Nikon z9. However, the product desc says it is?

A: The Q&A of the Spider Camera Holster Spiderpro Dual Mirrorless Camera System v2 are mixed with the Q&A of other variations. To clarify, the Nikon Z9 Mirrorless Camera should not be used with the Mirrorless versions, it should be used with the DSLR versions. Standard Nikon mirrorless cameras should be used with mirrorless versions. The Z9 should be used with the DSLR versions on account for its integrated grip.