The tan E6 Directional Earset Mic, Medium Gain, with Detachable 1mm Cable and Hirose 4-Pin Connector for Audio-Technica Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a Hirose 4-pin connector for direct connection to an Audio-Technica ATW-T35, ATW-T75, ESW-T211, ATW-T601, ATW-T701, AEW-T1000, AEW-T1000a, or ATW-T1001 wireless bodypack transmitter for use with 600 Series, 700 Series, 1000 Series, 1200 Series, 4000 Series, 5000 Series, 7000 Series, or System 10 wireless systems.

For Vocals and General Speaking    Detachable 1mm Cable    Hirose 4-Pin (AN), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Is this compatible with the canon 7d mark II?

A: The Vello ShutterBoss Version II Timer Remote Switch for Canon with 3-Pin Connection will be compatible with the 7D II, yes.

Q: 2. Will this work with the Pentax 645Z?

A: The Vello unit that was shown on your request has a sub mini connector that will not work on the 645z, you would need one with a regular USB connector. After I bought one of the hard wired cello units myself, I decided it would be better to have a radio frequency trigger control (more convenient in many situations)... so I suggested a similar unit like the Satechi USB controller which I like.

Q: 3. Hey Guys, I have a Wireless ShutterBoss Timer Remote (Nikon 10-Pin Connection), connected to a D700, I have also just purchased a Nikon GP-1A GPS Module, I am hoping to be able to use both devices simultaneously, but my problem is I have only the 1 10pin connector, is it possible to utilise the Vello RCC-N3 cable to connect the Shutter Boss Receiver to the GP-1A Im not sure what kind of plug the GP-1A uses, but the look to be about the same size? your feedback would be appreciated. Kind regards. Tony.

A: I use a GPS unit and they have a cable that splits the signal. I found that this splitter is available, but B&H won't let me mention other stores or links and B&H doesn't carry their products. If you research other GPS units for your camera you might stumble across this 10 pin Y splitter cable for Nikon .

Q: 4. Does this remote work for time lapse photography? I have the Sony a6000.

A: I have been using it for time lapse photography but I am not sure if it works with a6000. I am using a7r.

Q: 5. Does this work with the Nikon D90 ? If so DC2 or ten pin?

A: This would be Designed For Use With: B+W 403 Benro Truenight Nikon D300s Nikon D3x Nikon D4 Nikon D4s Nikon D5 Nikon D500 Nikon D6 Nikon D800 Nikon D800E Nikon D810 Nikon D810A Nikon D850 Nikon F100 Nikon F6

Q: 6. canon 5d markiv settings for RC-C2II ShutterBoss II Timer Remote ?

A: Just plug it into the camera and it's ready to use on manual. The other ShutterBoss features require turning on the unit.

Q: 7. Can I use it with a remote shutter release cable connected to the camera (Canon 6D) without the transmitter ?

A: Yes. The receiver does not use the hot shoe, it can just sit there for stability. The receiver actually works through a cable to the side of the camera, which can be plugged into either the receiver, or the main transmitter.

Q: 8. Has anyone tried this on the Leica SL2?

A: We tested this Vello ShutterBoss II Timer Remote Switch for Panasonic and Leica with the Leica SL2, and it did not work.

Q: 9. When button is depressed and held, does this complete all shots for a bracketed / HDR image?

A: If the camera is set for bracketing/HDR, yes. One depression of release works, camera does the rest.

Q: 10. Will this remote start and stop video?

A: some cameras you can assign the shutter to start stop video , if your camera allows you to do that then you can use this remote to start/stop video