Produce fantastic prints with vivid colors and high sharpness with the matte surface of Entrada Rag Natural 190 from Moab. Machine-made from 100% cotton fiber, this double-sided paper offers superb ink handling and a traditional feel. It also forgoes all optical brighteners for a natural brightness and whiteness of 84%. Also, the 15.5-mil thick sheets are acid and lignin free as well as water resistant and calcium carbonate buffered in order to ensure true archival longevity.

This paper is available here as a 25-pack of 13 x 19" sheets.

Machine-Made 100% Cotton Fiber Base    Basis Weight: 190 gsm    Thickness: 15.5 mil    Brightness: 84%    Whiteness: 84%    Double-Sided    No OBA Content    Acid Free and Calcium Carbonate Buffered    Water Resistant    Surface Finish: Matte

Related Questions and Answers

Q: 1. Can I buy extra camera plates for this Ulanzi? I don't see them listed.

A: The Ulanzi U-190 Mini Fluid Head can work with the Falcam F38 Quick Release Top Plate or other ARCA Swiss compatible plates. Falcam F38 Quick Release Top Plate BH #FAF38QRTP

Q: 2. How long is the arm?

A: Hi Brad W. The length of the arm is 80cm. All the best. Alex

Q: 3. Could you add another mount to the crossbar to attach a laptop plate?

A: Yes you can add this to the other side of the column, Manfrotto Camera Support Platform for Mini Salon BH #MA840 • MFR #840 https://bhpho.to/3Bnv9UE

Q: 4. Can you exchange the wheel lock mechanism when it wears out?

A: Yes, the brake unit is available separately. That would be the Manfrotto ASM BRAKE UNIT, BH #MARX0806.123 (https://bhpho.to/3GhWvid).

Q: 5. Do you need to buy a camera attachment or does if come with the bracket?

A: You would need to purchase some type of attachment. The screw that comes out on the arm is a 3/8ths inch size which doesn't fit in the bottom of a camera. At minimum you'd need this: https://www.bhphotovideo.com/c/product/824417-REG/Impact_ca_103_Small_3_8_Female_Threaded.html?sts=pi&pim=Y But I'd recommend some type of tripod head for this.

Q: 6. Hi can I use use it to do lay Flat , can I point the camera straight down.Lou Recine

A: With a tripod head that is not included you can tilt the camera completely down so you are shooting straight down on the floor. Most tripod heads work with this camera stand. It has a standard 3/8 connection.

Q: 7. it says recommended accessories one being the arca-swiss monoball. Can I attach the camera without this or do i need to purchase an attachment?

A: You would need to purchase some type of attachment. The screw that comes out on the arm is a 3/8ths inch size which doesn't fit in the bottom of a camera. At minimum you'd need this: https://www.bhphotovideo.com/c/product/824417-REG/Impact_ca_103_Small_3_8_Female_Threaded.html?sts=pi&pim=Y But I'd recommend some type of tripod head for this.

Q: 8. Another question...does this roll freely in a studio setting? I have a large studio, and I'm looking to replace an existing camera stand that rolls from scene to scene.

A: Yes it does roll freely plus you have the option to set the brake and lock it in place.

Q: 9. Is there a video for assembly? My instructions were not clear enough to read.

A: I bought a used one and after a mix up that B&H employees has almost cleared up, I managed to put it together today, August 1, 2018. My instructions was a multi-generation Xeroxed sheet, so it's probably about as clear as your instructions. But assembly is easy, even if the instructions are a bit smudged. (Did you also buy a used Stand, BTW?) First, removed the heavy duty screw and washer from under the tower. Next, in the box that contained the base or foot, look for the plastic bag holding the utility tray. Inside you'll find a thick Allen wrench. After, make sure the brake on the collar is engaged so it won't move up and down the tower. Then, while they're resting on the floor, align the tower to the base and secure them with the heavy duty screw and washer using the thick Allen wrench.Lift up the assembly. Next, inside the bag holding the horizontal arm, look for a bag holding two long screws and an Allen wrench. Align the pegs on the arm to the sliding collar (which has the brake handle) and note the two holes near the pegs on the collar. These are the screw holes for mounting the arm to the collar. Fully remove the two corresponding screws on the arm and use the long screws to attach the arm to the collar.Last step, attach the utility try to the collar. Congratulations, you now have a working Manfrotto Mini Salon 190 Camera Stand.

Q: 10. Will this work with the non-pro 190cx3?

A: Sorry this is for the Pro model only.