The black E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and TA4F Connector for Toa Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a TA4F connector for direct connection to a Toa WM-4300 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    TA4F (TA), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. will this work with a FujiFilm X-Pro-2 camera? it has the same plug in as the Sony

A: Page 72 of the Fujifilm X-Pro2 Mirrorless Digital Camera's instruction manual states that Electronic releases from third-party suppliers can be connected via the microphone/remote release terminal. A confirmation dialog will be displayed when a third-party release is connected; press MENU/OK and select REMOTE for MIC/REMOTE RELEASE. Page 45 of the manual indicates the Mic/Remote terminal is a 2.5mm sub-miniphone terminal, not the terminal used with the Sony camera. As such, the remote you list above would not be compatible for your needs. The Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, B&H # VERCC12, would be the correct remote for use with the Fujifilm X-Pro2 Mirrorless Digital Camera.https://a href= http://static.bhphotovideo.com/lit_files/152675.pdf target= _blank static.bhphotovideo.com/lit_files/152675.pdf/a

Q: 2. Will this work with Panasonic S1/S1R?

A: Yes, the ShutterBoss II Timer Remote Switch is compatible with the Panasonic DC-S1R Mirrorless camera.

Q: 3. How many cables come with this kit? 3 types (2 nikon and 1 canon) as described in the specs?

A: Mine came with 4 cables:- 2 Canon (3 pin terminal, and 2.5 mm sub-mini jack)- 2 Nikon (10 pin terminal, and DC-2 terminal)

Q: 4. Is it possible to use this wireless remote and a hot shoe flash at the same time? They both appear that they need to connect to the hot shoe, but how do I use both the remote and flash on one camera? I have a Nikon D90.

A: The ShutterBoss receiver doesnt need to be on the hot shoe in order to function: it simply needs to be plugged into the accessory port of the D90. You would want to use some Velcro, tape, or something to attach the receiver to the camera or tripod, though, so it doesnt hang from the cord.

Q: 5. Will this work on my Fuji X-H2 with 2.5mm sub-mini connector to remote jack?

A: Yes, the Vello ShutterBoss II Timer Remote Switch for Cameras with Canon Sub Mini Connector is compatible with the Fuji X-H2.

Q: 6. Can I still do back button focusing, and only use the ShutterBoss II to control the shutter?

A: Yes, you would be able to.

Q: 7. Is it possible to change shutterspeed/aperture/iso of the camera through this controller while a timelapse is active?

A: Not through the controller, but you can on the camera body itself.

Q: 8. Is this compatible with Panasonic G85 camera?

A: Unfortunately this will not fit the Panasonic G85

Q: 9. What remote control do you have for Canon 6 D Mark II

A: Sorry, I don't have a 6D Mark II. I have a 70D.

Q: 10. Will this work with a D5200 (as the genuine MC-36/A isn't compatible according to Nikon?)

A: Yes. This model will work for the D5200.