You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And Ta4f Connector For Toa Wireless Transmitters (cocoa)

Countryman E6 Directional Earset Mic, Highest Overload, With Detachable 2mm Cable And Ta4f Connector For Toa Wireless Transmitters (cocoa)
  • Product Code: ga231540
  • Availability: In Stock

$1,949.85 $3,100.26

The cocoa E6 Directional Earset Mic, Highest Overload, with Detachable 2mm Cable and TA4F Connector for Toa Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a TA4F connector for direct connection to a Toa WM-4300 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    TA4F (TA), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersToa: WM-4300
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersToa: WM-4300
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorCocoa
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. Has someone actually tried this with the Nikon D850? If so, does it work?

A: This was Designed For Use With: B+W 403 Benro Truenight Nikon D300s Nikon D3x Nikon D4 Nikon D4s Nikon D5 Nikon D500 Nikon D6 Nikon D800 Nikon D800E Nikon D810 Nikon D810A Nikon D850 Nikon F100 Nikon F6

Q: 2. Does it work with A7R4? I intend to make a HDR time lapse.

A: Yes, this remote is compatible with the A7R4.

Q: 3. Will this intervalometer allow for more than one image shot per second?

A: No, you cannot. The shortest exposure time available for use with the Vello ShutterBoss II Timer Remote Switch for Fujifilm is one (1) second. You cannot set an exposure time shorter than one (1) second, so you cannot use the Vello ShutterBoss II Timer Remote Switch for Fujifilm in interval mode and capture more than one image per second.

Q: 4. Will it work with a Canon EOS T1i?

A: The Canon EOS T1i works with the Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, BH #VERCC12 specifically. https://bhpho.to/3AOtZlq

Q: 5. what is the use of that ??????¿¿¿

A: The ShutterBoss II Timer Remote release enables the user to trigger a camera remotely avoiding accidental camera shakes and vibrations that can affect the shots taken. The remote also allows for creating long exposures, time lapses, timer delays, intervals between shots and many more useful features.

Q: 6. Will the remote allow for 10 frames per second?

A: Yes

Q: 7. Does it work with a Nikon D7200?

A: Read! Read and see which Nikon it works with! Scroll through the one available and pick the one that works with your camera! I have Canon!

Q: 8. Will this remote work with a Fuji-film XT-1 if you use the vello RCC F1-2.5 cable (B&H # VERCCF12.5 MFR # RCC-F1-2.5)? Part two - is the RCC F1-2.5 cable compatible with this Vello shutter boss ll remote? Thank you

A: Yes, if you use cable B&H # VERCCF12.5, you can use this remote with the Fuji XT-1.

Q: 9. Is it possible to change shutterspeed/aperture/iso of the camera through this controller while a timelapse is active?

A: Not through the controller, but you can on the camera body itself.

Q: 10. V-lux 114?

A: Yes this will work for the Leica V-lux 114.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Hikvision 3-axis Joystick Usb Keyboard

$569.85 $700.92

Products You May Like

Skb 3i Series Panel Mount Clip Kit

$89.97 $126.86

Ultimaxx Car Charger For Dji Spark Battery

$150.00 $229.50

Msi Cubi N Adl Small Desktop Computer (black)

$867.00 $1,283.16

Rosco Steel Gobo #7522 - Geometrics 8

$54.00 $80.46

Cavision 4 X 4" Soft Mist Black 1/4 Filter

$255.00 $390.15

Cineroid Barndoors For Lm400 Led Light

$234.63 $373.06