Featuring 16 independent 3G/HD/SD-SDI inputs, the DECIMATOR DMON-16S Multi-Viewer can be used either as a 1-to-16-channel multi-viewer or 16-to-1-input multiplexer supporting up to 1080p@60/59.94/50Hz on input and output. A miniature multi-viewer with front-panel LCD menu access, the DMON-16S is suitable for both on-location and studio applications, as you won't need to use a computer or DIP switch to make selections and adjust settings.

The DMON-16S offers 8-channel audio metering overlay per window with individual enables, custom positioning, and size, and it features 1 3G/HD/SD-SDI output and 1 HDMI output. RS-422 and RS-485 support additionally allow you to select tally display and control the UMD position and size.

Multi-View output mode lets you select and display inputs with different formats and frame rates at the same time, and Pass-Through mode allows any of the 16 inputs to be selected for output via the SDI and HDMI outputs. You can select from preset display layouts or create and save your own custom layouts, and with up to 32 GPI you can interface with additional devices for tally and remote switching.

Open Box Products Have a Limited 3-Year Manufacturer Warranty    1-16 Channel Multi-Viewer    16-1 Channel Multiplexer    16x 3G/HD/SD-SDI Inputs    LCD Menu Access (No Need for Computer)    8-Channel Audio Metering    1x SDI / 1x HDMI Outputs    RS-422 and RS-485 Support    Simultaneous Multi-Format/Rate Display    Select Presets / Create Custom Layouts    Up to 32 GPI

• 16 3G/HD/SD-SDI inputs with auto detection (26 formats supported in total)
• Use as a 1-to-16-channel multi-viewer or 16-to 1-input multiplexer
• 8-channel audio metering overlay per window with individual enables, custom positioning, and size
• 1 3G/HD/SD-SDI output and 1 HDMI output
• Custom layouts with various standard layouts
• 16-character UMD overlay per window with individual enables, custom positioning, and size
• Safe Action and Safe Title overlay per window with individual enables and adjustment
• Center Cross overlay per window with individual enable
• Audio ID overlay
• Tallies are applicable to either Tally Boxes (default), Outside Safe Action Area, or Border
• Tally Boxes allows for up to 4 tallies per window
• Fast switching between inputs using full-screen scaling
• Selectable output format in both Full-Screen and Multi-View modes
• Low-latency buffering for each input allowing non-synchronous inputs
• Linked 3G/HD/SD-SDI and HDMI outputs
• Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
• Variable aspect ratios per quadrant
• Pass-Through mode allows the selected input to be passed through to both the 3G/HD/SD-SDI and HDMI outputs
• Supports 32 GPI on 37-pin D-sub for tallies and remote switching
• Supports RS-422/RS-485 on 37-pin D-sub for Dynamic UMD and tallies using TSL protocol
• USB port for control and firmware updates

Related Questions and Answers

Q: 1. Is it glitch-free switching between inputs?What is latency beetween in and out? Thanks!

A: Switching is fast and glitch free.

Q: 2. What devices are available to use with the GPI input on the back? Can I switch between feeds using external hardware instead of USB? How well does this work?

A: No pre built devices that I am aware of that utilize the gpi. However I built a small control box using non latching buttons tied into the GPI and it works great.

Q: 3. My church use Sony D50 I was wonder would this work with it...and would we still need to use our switcher?

A: Yes it could.

Q: 4. Are the various outputs able to show different things (for example, 8 inputs out to 2 monitors show as 4-up on each monitor) or do the two outputs mirror each other?

A: Use as a 1-to-12-channel multi-viewer or 12-to 1-input multiplexe . Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously

Q: 5. Is to possible or simple to get tally information to display from a ATEM Production Studio?

A: Hi David, This is Jules from Product Support at Symbiosis, Decimator's master reseller for your region. The DMON-12S allows the triggering of tallies using either GPI or TSL protocol serial control via the RS485/422 port. I hope this helps. Best Wishes Jules

Q: 6. what do you mean by 16 Character UMD overlay per window with individual enables, custom positioning and size?

A: UMD overlay means under monitor display - i.e. you can name each window e.g, Camera1

Q: 7. Do you offer variable focal length lens for Sentech CCTV camera: STC-HD203SDI?

A: no, I do no. How it is conected with Decimator multiviewers?

Q: 8. Can this do portrait (vertical) output?

A: The DECIMATOR DMON-16SL 16-Channel SDI Multiviewer with HDMI Output can not output a in a portrait (vertical) format.

Q: 9. i need to go from my macbook running obs via Thunderbolt 3 and have 3 outs. one too my teradeck bolt for livestream via hdmi, one too my led wall laptop via hdmi and one sdi to a projector. can this do that?

A: No the DMON-6S would not work for multiple splits, it combines multiple inputs into one screen. You could use an Apple HDMI adapter (APMUF82AMA), a 1 x 4 HDMI splitter (KASPHD1X44K) and a HDMI to SDI converter (BLCMCHS3WPSU) to connect to all three devices.

Q: 10. Which EMI/EMC certification does this device meet? And temperature range?

A: The operating temperature range of the DMON-16S is 0ºC to 40ºC and the storage temperature range is -20ºC to 45ºC. Please open the following link to view the Declaration of Conformity for Decimator Design. file:///C:/Users/decastro/AppData/Local/Microsoft/Windows/INetCache/Content.Outlook/6GTD8XI4/DMON-6S_CE.pdf