This Comprehensive 25' EXF Series 3.5mm Mini Male TRS to XLR Male Cable is a balanced, low loss cable for professional audio applications. EXF series audio cables employ 100% Micro-weave bare copper shielding and CFP low loss dielectric for fast, accurate wide bandwidth signal transfer.

High-resolution, low-loss construction

100% tinned-copper braided shield

Molded strain relief

Related Questions and Answers

Q: 1. I was trying to do something that I think can not be done with what I have. This cable is not meant to go from a XRL mic needing phantom power to RCA correct?

A: you cannot use this with a phantom powered mic unless the mic is a self powered model containing a battery

Q: 2. Is the xlr connector balanced or unbalanced? Will this work with Sennheiser ew100 series receivers?

A: This Comprehensive cable is not going to work as an output cable for a Sennheiser ek100 camera-mountable receiver. The 3.5mm end needs to be a locking 3.5mm TRS connector and the XLR connector would need to be male. The Sennheiser CL100 cable (B&H# CL100) is the same cable that is included with the ek100 receiver and in ew 100 series wireless microphone systems that include the camera0mountable receiver. This cable is unbalanced. The Sennheiser CL500 cable (B&H# SECL500) is the same balanced receiver output cable that is included with the ek500 receiver and with ew 512P and ew 500 FILM wireless mic systems.

Q: 3. what size is the external mic jac on a sony ax700?

A: The mic input on the Sony AX700 is 1/8" / 3.5 mm.

Q: 4. Roland's list for this RCC-3-TRXM cable subtitles it a "balanced interconnect cable," but the product package diagram shows one lead and one shield; no 3rd lead for balancing signal. So which is this: bal/unbal?

A: The RCC-3-TRXM is a balanced audio cable. The XLR and 1/4" TRS connectors provide a balanced signal.

Q: 5. Is this cable 75ohm?

A: The Comprehensive EXF series 3-pin XLR male to RCA male cable is not 75-ohms. Depending on your application, a simple cable may not suffice. You may need a format converter.

Q: 6. Does this pull one channel, or take both? I believe you need an extra resistor in there to take both channels. Thanks!

A: Most adaptors of this sort will take two channels from the 3.5 stereo end and mono it out (combine to 1 channel) into the Xlr end.

Q: 7. Will this cable carry phantom power? I purchased some from another source and they do not work with my condensor tabletop microphones.

A: They carry phantom power with Crown PCC's just fine. That's all I've tried them with.

Q: 8. Is this a balanced cable?

A: No it is not. RCA connectors are not balanced.

Q: 9. Will this cable work with a Canon EOS C70 camera?

A: No, the Canon EOS offers 2 x Mini XLR Mic/Line (+48 V Phantom Power) Inputs Please review the following adapter that is needed in order to work with the following cable Kondor Blue Mini-XLR Male to XLR Female Audio Cable for Canon C70 & BMPCC 6K/4K (Blue, 16") BH #KOMXLR16 • MFR #KB_MXLR_16 https://bhpho.to/3CJ9Qj1

Q: 10. Will this work with the BMD SDI to AUDIO??? Audio jack output to RCA input in my amp.

A: thank you for your question. You can use this cable to connect the output of the BMD SDI TO AUDIO to your amp or receiver.