The Countryman E6i Cardioid Microphone is a miniature ear-set microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The cardioid version effectively minimizes off-axis feedback and noise from nearby monitor speakers, instruments and noisy sources. Flexible microphone positioning is maintained and the included windscreen minimizes the wind noise often associated with cardioid microphones.

The E6i is set apart from the original E6 with its softer flexible boom and silicon ear-pads. The flexible boom provides ease of boom adjustability to accommodate multi-user applications.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is black and features a Pigtail (Unterminated) connector for use with wireless transmitters.

Pigtail (Unterminated) for    2mm Diameter Duramax Cable    Strong Vocals    Cardioid    Black

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The cardioid polar pattern is effective in minimizing off-axis residual noise from e nearby monitor speakers, instruments and loud sources. The result is increased signal-to-noise ratio and minimal feedback. The flexible boom provides a custom fit for multiple users and close microphone positioning. The E6i is also available in an omnidirectional version for maximum control over wind noise and plosives (popping).

This E6i's sensitivity response is optimized to accurately capture strong vocals without noise and distortion. The high headroom is well suited for singers and performers in stage and broadcast applications.

Related Questions and Answers

Q: 1. Can this tripod handle the weight of heavier DSLR cameras?

A: The Benro MeFOTO RoadTrip Pro Aluminum Series 1 Travel Tripod with Ball Head and Monopod supports no more than 17.6 lbs. Note that weight is not the only thing to think about. The length of the lens is also very important. And long heavy lenses can tip a tripod. So it is best if the lens is long to get one that is over 20 lb support weight or more depending on the combinations.

Q: 2. How can I mount Arca Swiss plates onto this tripod?

A: While the plate that comes included will fit arca-swiss systems, the inverse does not work. You are only able to use 200PL or 200PL-PRO plates on the 494 ballhead.

Q: 3. will this work with my fotopro e6h grimbal and a nikon z9?

A: Yes, the Fotopro X-GO Max Tripod Kit with FPH-62Q Ball Head (Black) will mount and support the Nikon Z9 and the Fotopro E-6H Eagle Series Gimbal Head B&H # FOE6H MFR # E-6H.

Q: 4. I have a Manfrotto Befree Advanced Travel Aluminum Tripod with 494 Ball Head (Twist Locks, Red), does it work on Canon R5 body? Can I just use the 200PL RC2 type arca-Swiss plate or need to use something else, like RRS plate?

A: Success with the 494 ball head and the R5 will depend on the lens you're using. Heavier combinations, like the 100-500mm and 28-70mm f/2 might see limited success when the ball head is used in various positions. The 494 ball head does not accept arca-swiss style plates. However, the 200PLPro plate that comes with it is compatible with arca-swiss ball heads (it's weird, I know). The 494 will accept 200PL and 200PLPro plates, so it will work on an R5 without an RRS plate or L-bracket.

Q: 5. The t-025sk tripod I received only has pads on two of the legs - all product pictures I have seen show pads on all three. Is this normal or am I missing a piece?

A: My T-025SK has three foam pads.

Q: 6. Can a RRS L-bracket be used with the head included with this tripod?

A: Yes RRS L brackets do fit on the head that is included with Benro MeFOTO RoadTrip Pro Aluminum Series 1 Travel Tripod with Ball Head and Monopod (Black)

Q: 7. what is the difference between this and the Manfrotto BeFree compact travel aluminum tripod?

A: Much better ball head. I mean much. I prefer to carbon versions for be free advance. But price almost double. For carbon version be free compact price is more reasonable. Just 50$ extra. But for me I would never think about compact version, ball head just too weak even for A7 3

Q: 8. Is a quick release plate included with the tripod?

A: Yes, a quick release plate is on the Ball Head. Also, the actual weight of the tripod is 2 lbs, 2.5 oz instead of the 1.8 lbs that B&H and Sirui advertise. The 1.8 lbs must be the weight without the ball head.

Q: 9. Where is it manufactured in Italy or China?

A: This tripod is made in Italy.

Q: 10. Does this have a built in bubble level?

A: No. Please review the following for you leveling needs. Vello Two-Axis Hot-Shoe Bubble Level BH #VEBLHS2 • MFR #BL-HS2 https://bhpho.to/3x8OmZ3