This 100-pack of 20.5 x 24.25" Crystal Clear Bags from Archival Methods is made to store and protect photographs, flat art, and other types of documents against fingerprints during handling. The bags will also accommodate matted prints up to 0.38" thick.

The Crystal Clear Bag is made from a 1.5 mil biaxially oriented polypropylene that emits very low static charges, thus, not attracting any dust particles. The 1.5" flap also ensures that no outside contaminants get inside the bag by sealing it with the resealable adhesive strip located on the body of the bag. Because the adhesive strip is on the body of the bag, prints can be inserted or removed without the worry of a print getting stuck to the adhesive strip and causing any damage. The optically clear bags are safe and acid-free, which makes them suitable for long-term storage.

Holds Flat Art, Photos, and Documents    1.5 mil Biaxially Oriented Polypropylene    Resealable Adhesive Strip on the Body    1.5" Flap Opens on the Short Side    Fits Materials Up to 0.38" Thick    Optically Clear Plastic    Bag Emits Low Electrostatic Charge    Acid-Free and Safe for Long-Term Storage

1.5 mil biaxially oriented crystal clear polypropylene

1.5" flap with a resealable adhesive strip on the body of the bag

Fits matted prints or materials up to 0.38" thick

Bag emits a low electrostatic charge, which attracts less dust and fewer contaminants

The bag is safe and acid-free, which makes it suitable for long-term storage

Related Questions and Answers

Q: 1. This rescale the inputs? (Like input 4k and scale it to hd?)

A: no this will not scale the input signal

Q: 2. Is the output frame rate the same as input frame rate. Ie if my input frame rate is 29.97 will the output frame rate also be 29.97 or will it be converted to 30?

A: Yes, there is no conversion. The Crystal Video Technology Swift80 Transmission System supports the following formats: 1080p60/59.94, 1080p50, 1080p30/29.97, 1080p25, 1080p24/23.98, 1080psf24/23.98(SDI In), 1080i60/59.94, 1080i50, 720p60/59.94, 720p50, 480P, 576P, 480i, 576i.

Q: 3. Is it possible to have multiple receivers in using the RX in addition to 3 smart devices for example ?

A: No, with the Crystal Video Technology Swift800 Pro SDI & HDMI Wireless Video Transmission System (B&H# CRSWIFT800PR) one must choose either RTSP mode (for transmission to up to four iOS/Android devices) or Point-to-Point mode (for transmission to the receiver). One cannot use both modes simultaneously.

Q: 4. How to fix the TX ,it doesn’t turn on anymore after using 2 time thanks

A: Please contact Crystal Video Technology at www.cv-hd.com/contact for additional support.

Q: 5. Will the data that talks between a BlackMagic ATEM and BMPCC be transmitted so I get the camera control I am used to with wire HDMI?

A: Yes. But camera must be set to display info.

Q: 6. Does it support 10bit 4:2:2 ?

A: Yes it does.

Q: 7. Do the TX and RX units make any noise (e.g., fan noise)?

A: Users have reported there is some noise when using these products. However that noise is not a detriment to using it.

Q: 8. What has to be 1 meter apart to avoid interference when using multiple units? The transmitters, the receivers, or both?

A: Optimal range between transmitter and receiver is between 1 meter and 30 meters with in line of sight indoor

Q: 9. what is the SONY NP-F 970 battery time in TX and RX?

A: With the Sony NP-F970 battery you will get: TX: 6.3 hours RX: 7.56 hours

Q: 10. Is a direct line of sight necessary between the Tx and Rx?

A: Yes, this requires a direct line of site.