Bluetooth Stereo Audio Transmitter Receiver Module

Rdl D-tpr2a Active Rca Stereo Audio Output Over Dual Rj45 Receiver Module (white)

Product Code: ga231765
Availability: In Stock

$711.36 $903.43

Qty

0 reviews Write a review

Description
Reviews (0)

The D-TPR2A Active RCA Stereo Audio Output over Dual RJ45 Receiver Module from RDL is a CAT5 to RCA phono receiver module. The The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora-style remote controls. The D-TPR2A module features two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.

This module receives signal from only two cable pairs, so the D-TPR2A module has a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

The D-TPR2A may be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The D-TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The D-TPR2A unit can be mounted in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.

Parameters
Input Connections	2 x RJ45 Format A Single Pair Used: Switch-selectable A, B, or C Format A Output: RJ45
Output Level	100 ohms, unbalanced
Output Connection	2 x RCA Phono
Frequency Response	10 Hz to 50 kHz (±0.1 dB)
THD & Noise	< 0.005%
Noise	Below +4 dBu: < -90 dB
Crosstalk	< 90 dB (1 kHz) <75 dB (20 Hz to 20 kHz)
Headroom	Above +4 dBu: > 18 dB
CMRR	> 80 dB (50 to 150 Hz)
Indicators	Power In
Power Connections	Detachable terminal block, or through RJ45 twisted pair
Power Requirements	24 VDC @ 45 mA plus connected loads
Ambient Operating Environment	32 to 131°F (0 to 55°C)
Mounting Depth	Mounting Box Minimum Depth: 2.4" (6.1 cm)
Dimensions	1.6 x 4.11 x 1.89" (4.8 x 4.06 x 4.8 cm)
Weight	0.245 lb (0.11 kg)
Packaging Info
Package Weight	0.4 lb
Box Dimensions (LxWxH)	4.9 x 4.4 x 2.3"

Two unbalanced -10 dBV phono jack audio outputs

L (Left) output from pair B, R (Right) from pair C

Signal and Power pair pass-through on RJ45s

Remote powering through twisted pair cable

Fused local power feeds all connected modules

Local power input on terminal block

Blue LED indicates module is powered

Daisy-chain with additional format-A receivers (sold separately)

Precision active balanced circuitry

Related Questions and Answers

Q: 1. Can you connect a TV and 5.1 surround sound speakers to this

A: This is a stereo receiver, which means it is for two speakers. A TV can be connected, but only through analog stereo RCA connections. I would recommend an A/V receiver, such as the Sony STR-DH590 5.2-Channel A/V Receiver, BH #SOSTRDH590. This receiver will allow you to hook up to your TV with an HDMI cable, and accepts 5 speakers, as well as a powered sub woofer, for a 5.1 surround sound system. .

Q: 2. Is there USB connectivity for input from an Ipod?

A: Unfortunately this model does not have the ability for USB connection to an iPod or Smartphone. The USB port in the back is meant for Service and Firmware updates. You will need a Mini to RCA cable to connect either device to this Receiver.

Q: 3. Do you need a phono preamp to plug in a ken wood turntable?

A: No. This receiver offers a Stereo Phono Input.

Q: 4. What is the output impedance of the headphone jack? I'm wondering I will need a separate headphone amp.

A: The output impedance is not provide by the manufacture for the Sony STR-DH190 Stereo Receiver BH #SOSTRDH190.

Q: 5. where is the bass and treble control?

A: Hi Michael, yes, you can use the remote control to adjust the bass and treble of the receiver. ~Ralph

Q: 6. Are you able to use one of the connections for a sub-out?

A: While there are no dedicated sub-outs, it is possible to connect a subwoofer to one of the channels, say B, have two speaker connected to channel A, and operate the receiver in A+B mode. The user manuals of this receiver and SA-CS9 subwoofer can provide further detail.

Q: 7. Does this have a 2.5mm or 2.1mm dc input?

A: The SWIT S-8972 7.2V, 47Wh Lithium-Ion DV Battery with DC Output for Sony L-Series Batteries has a 2.5mm DC input.

Q: 8. Do I have to use rca cable with ground to connect Sony ps-lx310bt turntable to this receiver?

A: The Sony STR-DH190 Stereo Receiver (BH # SOSTRDH190) utilizes a screw terminal for grounding the phone. Bare wire is fine. The Sony PS-LX310BT Stereo Turntable with Bluetooth & USB (BH #S OPSLX310BT) does not require separate grounding.

Q: 9. Is it possible, to connect multiple bluetooth input sources simultaneously to this receiver?

A: The receiver is only able to accept one bluetooth connection at a time.

Q: 10. what is the input 1-4 for,what can hookup to them.?

A: Any external audio source, such as CD player etc.

There are no reviews for this product.